deep drilling used for sale

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

IBARMIA double drilling machine model BP-50. Year of manufacture 2005. Serial number 043285. Equipped with two drilling heads for simultaneous operations. Pneumatic workpiece clamping system. Integrated cooling system (coolant). Motor power 4.2 kW. Working speeds 750 / 1500 rpm. Electrical connection 380 V / 50 Hz. Acoustic level 78 dB(A). Machine with CE marking. Ideal configuration for series production and repetitive operations. Robust industrial construction on common base. The dimensions are approximate. Auction-ID: A7-44864-2

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

Spindle: MK 3 Dauerbohrleistung: 25 mm standard ALB ear performance: 30 mm of thread cutting performance: M 20 depth: 125 mm projection: distance 260 mm spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm overall height: 1,855 mm weight: 250 kg motor pole shift bar: 0.8/1.5 kW spindle speeds continuously variable range: 80 - 1440 min-1 range: 180 - 3,200 RPM digital display for speed as standard.

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

ROUTER type SCM R9

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

Dauerbohrleistung in St 60: 35 mm standard ALB ear power: 40 mm thread cutting performance: M 30 spindle: MK 4 feed adjustable: 20-400 mm / min drilling depth programmable: 175 mm projection: 300 mm spindle/table: 70-830 mm surface: 550 x 400 mm column diameter: 120 mm total height: 1,980 mm weight: 450 kg motor pole shift bar: 1.5 / 3.0 kW spindle speeds continuously variable range: 120-2,500 rpm spindle speeds stepless area B: 60-1,200 RPM

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

; ready for use

Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

Drilling and threaded spindles, with FIBRO round board approx. 800 mm, See pictures

with NC round table WALTER 1000 mm, see pictures

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

2 squid drilling spindles ROTAX, for conversions etc.

Towing radial, Mk 4, universally adjustable

Spindle cone MK 4 Machine weight approx. 2.5 t Space requirements approx. 2.2 x 0.7 x 2.5 m

Saling drill BLUTHARDT in robust performance, drilling capacity 50 mm, holder Mk 4

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...