deep drilling used for sale

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

Multivac R 240, film width 430 mm, fume hood 530 mm, 5 formats, soft film, fumigation, good condition. Still in production until February 2024

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

SOUND TOP ENERGY 250 – COSTAN + MIAMI 250 AHT ADVS Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and REFURBISHED product. Latest generation products, LED lighting and years of production from 2016. Dimensions: Length: 250cm Depth: 110cm ( included the freezer Miami 250 ) Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas. LED Lighting. Plug-in with Shuko plug. Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 1450 Lt. ( total capacity Sound Top 250 + Miami 250 ) Power input: 220 Volt. All the items are sold refurbished, tested and ready for use.

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami is tested but NOT REFURBISHED

The scope of delivery includes: 01x Depth bridge, used Manufacturer: Nedcon Material colour: sendzimir galvanized Truss support: approx. 40 mm f. Stand depth: approx. 800 mm Total length: approx. 802 mm Clear span: approx. 709 mm Profile dimensions: C:60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight/ piece: approx. 1,983 Kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

The scope of delivery includes: 01x Depth bridge, used Shelving system: SSI Schaefer Material colour: RAL 5010 blue Overall length: approx. 1,065 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 946 mm Profile dimensions: U 50 x 50 x 3.00 mm Truss support: approx. 54 mm Unit weight: approx. 3.75 kg The depth web can be used for the following truss profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm Box profile widths: - 40 mm - 50 mm General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Hopper and vibratory trough for Uhlmann UPS

Tray Sealer/Skin Packer Model: Erme TSK 410 incl. compressor + MAP-GasValve MAP-Traytool 2 x 225x175mmm incl. machines can be equipped with tools for skin-packs

Deep Groove Ball Bearings, Ball Bearings URB ROMANIA 6326 Inner Diameter: Ø 130 mm Outer Diameter: Ø 280 mm Height: 58 mm New ! Dimensions : 280 x 280 x 60 mm

Deep groove ball bearing, single row ZKL 6007 C3 version: C3 d = Inner = 35 mm D = Outer = 62 mm B = Width = 14 mm welded individually packed Minimum order value 50,- �

Deep Groove Ball Bearings, DKF 627 ( 10 pieces ) d = Inside = 7 mm D = Outside = 22 mm B = Width = 7 mm Price for 10 pieces ! for larger quantities, please ask for prices Minimum order value 50,- €

Deep Groove Ball Bearings, DKF 629 ( 10 pieces ) d = Inside = 9 mm D = Outside = 26 mm B = Width = 8 mm Price for 10 pieces ! for larger quantities please ask for prices Minimum order value 50,- €

Deep groove ball bearings, DKF 6302 Z ( 10 pieces ) d = Inside = 15 mm D = Outside = 42 mm B = Width = 13 mm Price for 10 pieces ! for larger quantities please ask for prices Minimum order value 50,- €

Deep Groove Ball Bearings, DKF 6202 ( 10 pieces ) d = Inside = 15 mm D = Outside = 35 mm B = Width = 11 mm Price for 10 pieces ! for larger quantities please ask for prices Minimum order value 50,- €

Deep Groove Ball Bearings, DKF 6202 Z ( 10 pieces ) d = Inside = 15 mm D = Outside = 35 mm B = Width = 11 mm Price for 10 pieces ! for larger quantities, please ask for prices Minimum order value 50,- €

Deep groove ball bearings, DKF 6202 ( 10 pieces ) d = Inside = 15 mm D = Outside = 32 mm B = Width = 9 mm Price for 10 pieces ! for larger quantities, please ask for prices Minimum order value 50,- €

Deep Hole Drills, Gun Drills with Internal Cooling GÜHRING ZL-TLB-1-R U ZFX 54,02 20 diameter: Ø 8.0 mm Total length: 700 mm groove length: 620 mm Shank diameter: Ø 25 mm Shank length: 80 mm New ! Dimensions: 700 x 25 x 25 mm

Deep hole drills, gundrilling drills with internal cooling PAGUS TBT Ø 10,000 15 x 480 ( TBTØ10,15x480 ) K15 C40 51/07 Diameter: Ø 10,15 mm Total length: 490 mm Groove length: 400 mm Shank diameter: Ø 16 mm Shaft length: 50 mm New ! Dimensions: 490 x 16 x 16 mm

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 800 mm   Y-axis travel: 600 mm   Z-axis travel: 800 mm   W-axis travel: 1250 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° WORKING RANGE -BORING-   drilling depth (max): 800 mm   drilling capacity full bore (steel): 25 mm SPINDLE / HEAD   tool fixture: HSK A50   drive power: 15 kW AXIS DRIVES   feed velocity (max): 15000 mm/min TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5600 mm   space requirements -front/back-: 4910 mm ...

Semi-automatic with rotary table • Max. Tool dimensions 300 x 500 mm • Max. Tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature for forming and sealing plate can be set differently • Two-hand operation • 1 tool set available • PLC Omron SYSMAC CPM1 • Touch panel • Mobile • Drive 400V/50Hz

Semi-automatic with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Output max. 16 cycles/min Forming and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-handed operation Without tool set Drive 230V/50Hz

• Semi-automatic machine with rotary table • Max. Tool dimensions 300 x 500 mm • Max. tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature can be set differently for moulding and sealing plate • Two-hand operation • Without tool set • Drive 230V/50Hz • Incl. an additional Universal 500 FS deep-drawing/sealing machine as a spare parts carrier

• Semi-automatic machine with rotary table • Max. tool dimensions 200 x 400 mm • Max. tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature can be set differently for moulding and sealing plate • Two-hand operation • Without tool set • Drive 230V/50Hz

A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.

Height=2.61 m, Overall length= 1.25 m, Overall width= 6 m, Net weight= 2000 kg,

Height=0.85 m, Overall length= 0.7 m, Overall width= 0.7 m,

A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

WEBOMATIC APS ML 4600 THERMOFORMER

Height=1.1 m, Overall length= 0.777 m, Overall width= 1.244 m, Net weight= 180 kg,

FAMAR THERMOFORMER, MODEL RM150 Thermoformer for the packaging of various products (tablets, soft or hard capsules, dragees, ampoules). Technical documentation available. Incoterm: EXW PRODUCTION Output: up to 100 blisters/min Film material: alu, paper, PVC Max reel width: 140 mm Max diameter of the thermoformable material reel: 400 mm Max diameter of the covering material reel: 200 mm Max forming depth: 15 mm Spacing: from 50 to 150 mm OTHER CHARACTERISTICS Machine size: 4460 x 1080 x 2260 mm Weight: 2000 kg ENERGY CONSUMPTION Power supply: 380 V + ground / 50 Hz; Absorbed power: 9 kW; Compressed air consumption: 200 l/mn

2005 Multivac R 240, hard and soft film, film width 355 mm, take-off 200 mm, sandwich preheating, stamps heated, MAP, MC 96-2 control, upper stroke at mould and sealing station, soft and hard film cutting, outfeed belt and residual film rewinder, central lubrication, automatic chain lubrication. Top condition-ready for use.

Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible.

2 pieces Ice Cream Chest/Ice Cream Sales Chest/Ice Cream Chest/Freezer Used External dimensions W: 190xD:1100 H:140cm with round glass lid with lighting with rear storage compartment 2 doors not cleaned front lower fairing is missing

Used automatic thermoforming machine for butter packaging from TMCI Padovan type FM80-8 H.C. Packages of 10 grams and 125 grams.

film width: 470 mm, equipped with SKIN function, equipped with touch panel, 2 residual film rewinders, pushover vacuum cleaner and other accessories Auction-ID: A1-43573-203

film width: 362mm, equipped with 2 residual film wrappers, 1 SIENS SIMATIC TP27 touchscreen Auction-ID: A1-43573-204

equipped with touch panel and pallet with accessories Auction-ID: A1-43573-205

IN WORKING CONDITION. TESTED FOR FUNCTION. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-96

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

Bio-Rad Reaction Module 96W Deep Auction-ID: A7-45427-107

Consisting of deep hole drills in various sizes and designs, incl. trolley (1350x810x970 mm), suitable for Lot 19 Auction-ID: A1-45714-22

Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)

New unused This 12 volt 85 ah Varta LAD85 AGM Deep Cycle battery has the latest technology and is therefore the suitable battery for the latest boats, yachts, campers, caravans and electric outboard motors. The battery is also ideal for seasonal use, so you don't need to charge it extra when you take your boat or motorhome out of storage in winter. In addition, it is also extremely suitable for Dual Power and can therefore be used for starting and for the power supply of the electrical consumers. The LAD is perfect as: light battery, on-board battery, service battery, leisure battery and anything else that consumes more power and of course also as a starter battery. Due to the low internal resistance, the battery is charged faster and it ensures that high power can be extracted from the battery for a long time. The LAD 85 incorporates state-of-the-art battery technology and has up to 8 ...

Consisting of deep hole drills in various sizes and designs, incl. pallet, suitable for Lot 19 Auction-ID: A1-45714-20

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the