deep drilling used for sale

bore capacity in steel (diameter): 40 mm throat: 250 mm bore stroke: 125 mm spindle taper: MK 4 spindle turning speed range: 50 - 2500 U/min : 550 mm : 230 mm table surface area: 820 x 240 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Drill chuck -Hydraulic clamping -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900Kg

Column Drill

Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.

bore capacity in steel (diameter): 36.0 mm bore capacity in cast iron: 45.0 mm throat: 300 mm bore stroke: 160 mm : 4 speeds: 65 - 2000 U/min column diameter: 145 mm table-size: 615 x 460 mm feed: 0.1 / 0.2 / 0.3 mm/U total power requirement: 1.75 / 2.5 kW weight: 440 kg dimensions: 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features: - Robust column drill press (V-belt drive) - Electromagnetic feed clutch = spindle feed with overload protection and electric cross-handle control - mushroom-head pushbutton (latching) for EMERGENCY STOP located on the front panel - continuously variable speed control - clockwise rotation of the drill spindle - Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable - Separate coolant system, with reservoir - Operating instructions in  ...

With lighting, drill chuck 16 mm 12 speeds by moving v-belts Base plate W= 270mm D= 450 mm, column 80 mm, drill plate D= 310 mm With machine clamp. Auction-ID: A1-48994-53

column 90 mm, Height column drilling machine 1750 mm. Drill chuck 16 mm with key. 2 different speeds by rerouting the V-belts. With machine clamp Auction-ID: A1-48994-37

2.2 kW, equipped with emergency stop button, blade extraction, quick-release drill chuck 2-20 mm, 17 threaded clamping holes. A hand-operated ball-bearing drill reticle carriage with depth stop. Drill height adjustment numerically readable. Dowel / row drill device with 16-22-25-32 mm pitches, With left and right rotatable double adjustable stops with aluminum butt lugs, Clamping toggle can be positioned both left and right. With lighting. Auction-ID: A1-48994-21

5 adjustable drilling speeds by rerouting the v-belt. Drill chuck 13 mm with key. Auction-ID: A1-48994-39

1.1 Kw, Hole hinge drilling machine with pneumatic drilling unit with three drill heads of 10-35-10 mm for Blum inserta hinges. Facility for row drilling. Equipped with two pneumatic pressure cylinders Left and right measuring ruler and double breech cams Metal Cooker Hood lower table with two drawers on 4/4 rails for hinge storage Auction-ID: A1-48994-50

5 adjustable drilling speeds by rerouting the v-belt. Drill chuck 13 mm with key. Auction-ID: A1-48994-38

: 18 mm : M 12 : M 14 : MK 2 : 225-4.300 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel total power requirement: 0,37/0,55 kW Machine height: 840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dürselen Corta PB 04 Paper drilling machine Age: 1999 4-spindle Drill hole diameter: 3-15 mm Drilling distance: 31.7 – 293 mm Max. stacking height: 50 mm

Key data: 50 mm, 1600 mm

Radial drilling machine max. drilling diameter in steel 50 mm max. drilling diameter in cast iron 60 mm max. thread in steel M50 x 1.5 Spindle projection 1600 mm max. distance spindle nose to lower part plate 1505 mm max. boom height adjustment 875 mm Max. drill carriage adjustment on boom arm 1280 mm Taper of spindle Morse 5 Spindle stroke 310 mm Spindle speed infinitely variable 12 Spindle speed range 28 - 2500 1/min Max. torque 310 Nm Base plate 1820x986 mm Machine weight approx. 4550 kg

Stegherr dowel drilling machine Manufacturer: Stegherr Type: FD Year: 1995 Mach.Nr.: 35/12951 Control: Alfa-nummeric mit pre-programmed drilling patterns Alongsiide and head-tail drilling Length stopper: Left- and right digital stoppers for alongsicde drilling Head-tail: Left-Right drilling wih revolver posiioning devices Dowels: 6-16 mm Stroke: 80 mm Motor: 2.2 KW Air pressure: 6 bar Dust extraction: ø80 mm Condition: fully functional tested – fully operational

Weeke ABD 150 Drill and dowel inserting machining center manufacturer: Weeke Type: ABD150 Year: 2013 Mach.Nr.: 0-253-05-5352 Production hours: Desctription: CNC-controlled drill- and dowel automat for production of furniture and such Workpiece dimensions: X-ax 20 – 1.250 mm Y-ax: 100 – 800 mm Z-ax: 10 – 60 mm Center positioning fence: max. 600 mm Workfield: 1.250 mm Positioning: X-as AC -servo drivesystem via tooth bar Y-as: manual setting X-as: manual setting Positioning stops: Table support with rear- and sideward stoppers 6 workpiece supports manual positioning over full machine width, with scale Pneumatisch controlled center fence via manual control button 5 top clamps, manual positioning Vacuum clamps for sensitive panel surface 10 vacüumcups (115140100 mm) manual position over full machine width 2 vacüumcups (12575100 mm) manual positioning over full machine width 1 externa ...

Vitap Forex 24 Manufacturer: Vitap Type: Foratrice Forex24 Machine Nr.: 790847 Year: 1999 Motor: 1.8 kW Nr. Spindel: 21+3 Head and topdrilling: Electro-pneumatic tilting Semi-automatic: Verical and horizontal drilling: RPM: 2.840 rpm Drilling dept: Max. 80 mm, with Siko counter Raster: 32 mm Spindel/group: 3-5-9 Length stoppers: both sides scale with 2 filp stops per side Clamps: 2 pneumatic clamps top-side manual adjustment Pressure: 6-8 bar Dimensions: 1.570920 mm Weight: 350 KG

Alzmetall AX3 SV Säulenbohrmaschine Hersteller: Alzmetall Typ: AX3SV Baujahr: 1996 Zustand: gut, gebraucht Drehzahlbereich: 160 ? 2250 U/min Bohrvermögen (St60) 40 mm Futter-/ Werkzeugaufnahme MK 3 Spindelhub 120 mm Ausladung 293 mm Säulendurchmesser 115 mm Abstand Spindel-Tisch min./max. 117 / 701 mm Vorschub 0,1 + 0,2 mm/U Nettogewicht ca.270 kg Sonderausstattung: ? Automatischer Vorschub ? Spindelschutz

Used, untested. MK4 recording. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-11

Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50065-260

Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-326

Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-260

Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable 80 - 1170 rpm - 2 feeds 0.1 / 0.2 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - Right – Counterclockwise rotation - Keyless chuck 1-13 - Lighting

Auction-ID: A1-50229-68

Offer 26203 Technical data: - Drilling capacity - in steel 16 mm - - in aluminium 20 mm - Drilling spindle holder MK 2 - Drilling depth 100 mm - Spindle / column projection 215 mm - 6 drilling spindle speeds stage 1 200 - 1600 rpm - 6 drilling spindle speeds stage 2 400 - 3200 rpm - Drive 400 V / 0.7 kW - Drilling table with T-slot W 250 x D 320 mm - Max. distance between drill chuck / table approx. 220 mm - Space requirement approx. W 300 x H 1050 x D 450 mm - Weight approx. 100 kg - Keyless chuck 1 - 13 mm - Coolant device - Original machine cabinet

Offer 26251 Technical data: Drilling capacity in steel ST 60 32 mm Drilling capacity in steel ST 60 40 mm Long spindle MK 3 Drilling spindle speeds infinitely variable 160 - 2250 rpm Drilling spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machined base plate with T-grooves 400 x 400 mm Max. distance from base plate to spindle 600 mm Emergency stop button E. Footswitch Space requirement approx. W 450 x H 1250 x D 900 mm Weight approx. 250 kg Keyless chuck Table base

In metal case.

table with 4 slots, Incl. matching tool holders

incl. vice, jaw width: 100 mm.

Incl. vice, jaw width: approx. 150 mm

• Drilling units: four • table with one slot • vise, jaw width: 80 mm

incl. Machine vice, jaw width: approx. 135 mm

Spindeldrehzahl: von 220 bis 2500 U/min, Spindelaufnahme: MK 2, Motorleistung: 550 kW, Betriebsspannung: 400 V, Tischabmessungen: 200 x 200 mm

WABROTECH DJ-16 E Magnetic Core Drilling Machine Manufacturer WABROTECH Model DJ-16 E Condition untested Location 73529 Schwäbisch Gmünd DE Lot 25

Maschinennummer: 00874, Betriebsspannung: 220 V, Frequenz: 50 Hz, Anschluss: 315 W, Tischdurchmesser: 250 mm

Additional technical specifications: • max. tube diameter: approx. 30 mm • Chuck clearance: 30 mm • max. clamping length: approx. 3200 mm

Drehzahl: von 200 - 2800 U/min, Bohrtiefe: bis 100 mm

SOLID TB 15 Bench Drilling Machine Manufacturer SOLID Model TB 15 Condition untested Location 72589 Westerheim DE Lot 37

Attention: the tapping head seen in the photos is not included in the scope of delivery! Additional technical specifications: • Drilling units: three • table with one slot

Additional technical specifications: • Drilling machines: a total of six drilling machines • Vices: three vices • jaw width: 150 mm

Incl. frame.

REXON SB 25/16 G Column Drilling Machine Manufacturer REXON Model SB 25/16 G Year 1990 Condition untested Location 72589 Westerheim DE Lot 166

Incl. vice, jaw width: 160 mm

REXON SB 25/16 G Column Drilling Machine Manufacturer REXON Model SB 25/16 G Year 1990 Condition untested Location 72589 Westerheim DE Lot 167

Drilling Ø: 35/40 mm Spindle holder: MK 3 Drilling stroke: 140 mm Projection: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 285 kg Space requirement: 900 x 550 x 1830 mm

Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Motor power 1,5 Hp Compressed air pressure 6/8 atm Overall dimensions mm 750 x 560 x 1200 h Weight kg 160

: gebraucht : 2017 : 3901 : China : 8490 € : 1 : 6790 € : 32 mm : MK 4 : 300 - 1.000 mm : 32 - 2.500 (16) U/min : 1760 mm : 800 mm : 2080 mm : 1600 kg : 530 - 1.000 mm : 2.2 kW : 240 mm : 250 mm : 0,75 kW : 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-ma ...

: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 12480 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENC ...