135,630 used machines on RESALE, but how to find them? Machine Search
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Speed max.6000 rpmNumber of driven tools12 Power max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...
Lg.Nr. 25072 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable rpm - Projection 350 mm - Max. distance from drilling spindle to table 580 mm - Table with 2 T-slots 600 x 450 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 1950 x D 950 mm - Weight approx. 650 kg -with: - Machine vise - Keyless chuck 1-13 mm -Lighting
Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25094 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 60 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 225 mm - Drilling spindle speeds infinitely adjustable 35 – 950 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max. distance from drill spindle to table / base plate 740 / 1220 mm - Table with 2 T-slots 700 x 590 mm Height adjustable via rack with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space requirement approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - with: - Emergency stop button -Lighting - Coolant device
ID3518 Bomag B200 on Iveco truck - Well drill / well drill year/Baujahr 1985 approx. 35,000 km Bomag B200 drilling rig (built in 1985), mounted on an Iveco truck (all-wheel drive), with a 100 mm rotary head and a 120 m cable, drilling depths of up to 245 m (250-300 mm diameter), 2 Caprari pumps (type MEC-100), with approximately 90 m of drill rods (114 mm diameter) Bomag B200 (built in 1985), on truck Iveco (all-wheel drive), rotary head 100 mm passage, rope head 120 m rope, drilled to 245 m depth - 250-300 mm diameter, 2 Caprari pumps (type MEC-100), with approx. 90 m drill pipe (114 mm diameter)
Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg
Key data: 13 mm
Made in Germany Drill chuck: B 16 Speed: 480 - 4,000 rpm
bore capacity in steel (diameter): 35 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 4 table-size: 500 x 400 mm spindle turning speed range: 75 - 3.010 U/min feed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke: 150 mm voltage: 400 V total power requirement: 1,8 kW weight of the machine ca.: 275 kg dimensions of the machine ca.: 0,70 x 1,00 x 1,95 m threading device: - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 245 mm bore stroke: 135 mm spindle taper MT: 3 table-size: 410 x 380 mm spindle turning speed range: 10 - 2100 U/min voltage: 400 V total power requirement: 1,1 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 0,7 x 1,8 x 1,75 m threading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads (one of them unused); Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; Max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless Drilling Belt; optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads (one of them never used); lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht
Oscillating Drilling Machine COMEC MM0 10 3L Number of horizontal spindles per page 4 Drilling distance between centers during chiselling: min/max: 45/760mm Drilling distance between centers during straight drilling: min/max 45/850mm Hole length 0-100mmm Spindle speed 4500/9000 rpm 3 independently adjustable oscillations Oscillation motor 1.5kw Total power 7kw Pneumatic material clamps Maximum workpiece dimensions 1000x 100x 100mm Capacity 600pcs/h (300+300) CE Certified Year of production 2005 Machine dimensions: 1450x1650x1350cmH Weight about 1000kg
Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG
A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.
: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
voltage: 50 V frequency: 50 Hz ampere: 3,7 A : 21882 speeds:: 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Motor output: - kW Dimensions (L/W/H): - mm Vertikal stroke: - mm Table dimensions: - mm Dust suction hood: - mm Diameter of the saw arbor: - mm Length of the rolling table: - mm Sawblade tiltable: - ° milling stroke vertical: - mm total power requirement: - kw Weight: - kg Spindle diameter: - mm Length of the planing table: - mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. 0: St. Number of tools: St. Working width: mm Year: 0 Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adjustment: 0 Working height: mm Workpiece length min.: mm Air consumption: m³/h Positions adjustment of boring unit: mm Position ...
bore capacity in steel (diameter): 60 mm throat: 400 mm bore stroke: mm total power requirement: 4,4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm arm length: 1000 mm workpiece height max.: 1400 mm total power requirement: 6 kW weight of the machine ca.: 3.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 3 MK table:: 500 x 350 mm column diameter: 105 mm turning speeds: 75 - 3010 U/min total power requirement: 0,9 / 1,2 kW weight of the machine ca.: 235 kg. range L-W-H: 1740 x 670 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mm x-travel: 850 mm y-travel: 435 mm Control: HEIDENHAIN TNC 150 total power requirement: 16 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle tape ...
bore capacity in steel (diameter): 20 mm throat: 180 mm bore stroke: 82 mm turning speeds: 220 - 2840 U/min : 290 x 290 mm total power requirement: 0,55/0,75 kW / Volt weight of the machine ca.: 54 Kg dimensions: 820 x 500 x 290 mm CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 4 bore capacity in steel (diameter): 23 mm bore stroke: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load Weight Shelf: 28000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,7 x 2,55 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 14 /15 mm throat: 180 mm bore stroke: 70 mm turning speeds: 420 - 2100 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 0,5/1,0 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 150 mm bore stroke: 90 mm turning speeds: 340 - 2200 U/min : 243 x 243 mm total power requirement: 0,5 kW / Volt weight of the machine ca.: 42 Kg dimensions: 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 180 mm bore stroke: 85 mm spindle taper: MK 2 spindle diameter: 47 mm spindle turning speed range: 320 - 3300 U/min : 230 mm : 100 mm table surface area: 420 x 155 mm connected load frequency: 230 V : 900 x 600 x 300 cm total power requirement: 0,75 kW weight of the machine ca.: 8o Kg dimensions: 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 115 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 350 mm : 130 mm table surface area: 590 x 190 mm connected load frequency: 400 V diameter of hob: max. 80 mm feed: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 160 mm spindle taper MT: 4 MK table:: 500 x 420 mm column diameter: 120 mm turning speeds: 85 - 1800 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 0,85 / 1,5 kW weight of the machine ca.: 500 kg. range L-W-H: 965 x 515 x 1920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load Weight Shelf: 15000 kg Loading weight per level: 3000 kg Number of load levels: 5 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load Weight Shelf: 30000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 700 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 3 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 245 mm bore stroke: 120 mm weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1.6 x 1.5 x 2.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg
Paper drill Hang 106DTK4, machine number 62407, in good condition, immediately available
bore capacity in steel (diameter): 18 mm throat: 225 mm bore stroke: 110 mm table-size: 430x345 mm spindle turning speed - stepless: 135-4500 U/min Digital read-out Tapping attachment Cross table 530x255mm Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 325 mm bore stroke: 170 mm table surface area: 730 x 590 mm 0: 130 - 1200 U/min feed: 0,09 - 0,16 - 0,28 mm/U tool taper: MK 4 total power requirement: 1,8 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drill with: Feed 2 gears Left/right rotation Foot switch Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paper drill Nagel Citoborma 490, machine number 41648, 4 drill heads, functional, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Bdobr Sbevr U Rve Nwkjc You are welcome to visit the machine in our house by prior appointment.
bore capacity in steel (diameter): 40 mm arm length: 1000 mm workpiece height max.: - mm total power requirement: 5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,4 x 1,2 x 3 m Vertical movement not functional No. 4656 Radial drilling machine MK 4 make OOYA, type RE 2 - 1300 A Year of manufacture 1978 Working area: MK 4 x 1000 x 660 mm Spindle holder MK 4 Speed range 32 - 1655 min-1 ( 50 Hz ) Space requirement approx. 1.2 x 2.4 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...
maximum number of results exceeded
please refine your search
