decoiler used for sale

v.v. 8 working levels; 1st level max. 90T; 2nd to 8th level; 80T (total 160T); Max. material thickness 3 mm; speed 25-50 strokes/min.; Distance between the tools 260 mm; incl. decoiler for strip material; soundproofing cabinet; "Siemens" digital control; type S7. Machine overhauled with completely new cabling and Siemens control

equipped with double crankshaft with rear gear transmission; incl. decoiler; bending machine for strip material; Sound-absorbing cabinet and outfeed belt

v.v. 8 working levels; 1st level max. 90T; 2nd to 8th level; 80T (total 160T); Max. material thickness 3 mm; speed 25-50 strokes/min.; Distance between the tools 260 mm; incl. decoiler for strip material; soundproofing cabinet; "Siemens" digital control; type S7. Machine overhauled with completely new cabling and Siemens control

v.v. 8 working levels; 9 tool positions; 1st level max. 100T; 2nd to 8th level 220T (total 500T); speed 15-50 strokes/min.; Max. material thickness 3 mm; distance between the tools 400 mm; incl. decoiler for strip material; soundproofing cabinet; conveyor belt installation; "Siemens" digital control; type S7

sheet width - max.: 0500 mm coil weight: 3,00 t coil internal dia.: 370 - 510 mm total power requirement: kW weight of the machine ca.: 0,54 t dimensions of the machine ca.: 1,25 x 1,08 x 1,67 m material width (previously) 300 mm mandrel length 500 (510) mm mandrel – Ø (expandig range) 370 – 410 mm dto. with segments 470 – 510 mm height floor - middle of mandrel 1.050 mm height upper edge decoiler construction - middle of mandrel 860 mm accessories: construction 3-segment-construction expanding process mechanically no. – limiting arms 5 dimension – limiting arms (l x h) 400 x 60 mm brake unit mechanically (via star grip) no. – segments 9 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wafios straight and cut machine Extension length: 3m Decoiler 3T horizontal Year 2006

Sheet thickness: 2,00 mm Sheet diameter: 2 mm Knife diameter: 0 mm BMS - KSA 1500 x 2.0 Decoiler for coils up to 1500 mm Straightner with 9 rolls adjustaable to 0.2 -  2 mm Slitting roll with 3 knive blades Cutting plate shear up to 2 mm Positioning & Feed & Speed controller Maximum sheet thickness:2mm Length:                4500mm Width:                 2000mm Height:                1600mm Weight:                4000kg

BTS 200 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 gt; 1,5 mm winding diameter: max 40 mm 18 gt; 445 pieces/min power: 1,5 kW length: 990 mm width: 1000 mm height: 1600 mm weight: 610 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

BTO 236 spring coiling machine + AB1 decoiler cap wire diameter: 1 gt; 3 mm winding diameter: max 70 mm max spring length: 180 mm max length of leg: 80 mm speed: 80 m/min power: min 9 kW / max 13,4 kW length: 1500 mm width: 1100 mm height: 1500 mm weight: 1300 kg

BX 400 spring coiling machine + AB2 decoiler cap wire diameter: 0,8 gt; 4 mm winding diameter: max 70 mm speed: 180 m/min (max 90 pieces/min) power: 6 kW length: 1400 mm width: 1350 mm height: 1900 mm weight: 2200 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left

BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,2 gt; 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 1300 mm weight: 620 kg

FIMI cut-to-length line for stainless steel 1500x3mm x25t (A3776) FIMI cut-to-length line for stainless steel 1500x3mm x25t (A3776) is perfect solution for stainless steel metal processing. Line is pretty new and very good conditions. It has all important parts for working. All components made by FIMI. FIMI -is top quality coil metal processing machinery manufacturer Manufacturer: FIMI Year: 2004 (2018 was installed new controller box and plc new) Working length: 1500mm Minimum metal thickness: 0.4-0.5mm Maximum metal thickness: 3mm Maximum coil weight: 25t Supply scope: -coil car -decoiler -entrance feeder -entrance shear -levelling machine -wrapping part -guillotine -conveyor -stacker

Key data: 2 mm

Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.

Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

sheet width: 0600 mm coil outside dia.: 1500 mm weight max. in kg: 4000 kg width of sheet max. ca.: 3,60 mm sheet thickness - min.: 0,80 mm diam. of the rolls ca.: 80 mm nomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/min range of expansion ca.: 475-535 mm expansion: hydraulisch pinch roll: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at t ...

Sale of a complete line for the production of acoustic barriers for roads and railways. 1) A line for the production of containment boxes for road acoustic panels. The line is complete with all components, currently not assembled, but can be viewed upon request. If you are interested we can provide a quote, without any commitment, both for the complete production lines and for the individual parts. Dont hesitate to contact us if you are interested. Obviously the most attractive price is on the purchase of a complete line as the sale of a single component precludes the integrity of the entire line. Machines of production line list: 1) Profile for sound-absorbing panels to be installed on road barriers. 2) Piemme Decoiler. 3) Profiler with 12 transitions. 4) Cutting shears. 5) Roller bench. 6) Control console.

The line avaible to sell is used but in very good conditions. It is equipped with: n.1 Decoiler 1250mm x5 ton n.1 Roll-forming machine with n. 12 passes- useful width 1000 mm n.1 Set of Forming rolls assembled to produce corrugated profile 75x18 mm n.1 Flying shear with guillottine blades (pneumatically operated) n.1 Electrical system with programmable device n.1 Tank for compressed air (without compressor)

- Year of manufacture: 1989 - Start-up: 1991 o Decoiler - max coil width: 1.500 mm - max coil weight: 4 t - speed: 12 m/min o Straightening drive and hydraulic shears - min cut length: 100 mm - max cut length: 2.000 mm - Additional: paper insertion for protection - Suitable for cutting: paper, cardboard, aluminium thickness up to 0,5 mm, zinc thickness up to 0,6 mm, tinplate 0,6 mm o Sorting and transport table o 2× Stacking table: 4 t - line length: 20 m - line width: 5 m - without electronics control device - partly operational

The thickness of the cut sheet is 0.5-4.0mm Decoiler with a lifting capacity of 25T coil outer diameter 508-610mm inner diameter circle 2000mm Slitting unit Width of the cut strip min 10.30mm Circular knives for cutting thicknesses of 5mm, 10mm, 12mm, 20mm, 25mm, 30mm 10mm, 12mm, 20mm, 25mm, 30mm wide push spacers Brake Winder inner diameter 508mm lifting capacity up to 16t. inner diameter max.2000mm

TECNOSALD 1600 welder Year of manufacture: 2007 Weight: about 5500 kg Working width 1600 mm Installed power 30 kW New control - HMI panel, PLC controller and Mitsubishi inverters Perforating knife Photocell Antistatic device Double decoiler 3m long table with automatic bag removal Film parameters: Thickness: Min: 0.018 Max 0.100mm x 4 Length up to 3000 mm Number of ticks per minute: Foil up to 0.030 up to a length of 700 mm 50-60 Film above 0.030 mm 15-18

sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0600 mm coil weight: 2 x 1,50 t coil internal dia.: 370 - 630 mm coil outside - diam. ca.: 1560 mm 0: 12 U/min power capacity: 1,1 kW total power requirement: kW weight of the machine ca.: 1,55 t dimensions of the machine ca.: 2,60 x 1,20 x 1,90 m double decoiler with motor, manual expansion, coil loop control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Line consists out of: 1 - Decoiler 15 ton - max length: 1200 mm 2 - Slitting unit - interchangeable cassette system - max length: 1100 mm - max thickness: 3 mm 3 - Scrap winder 4 - Recoiler + unloading arm

Line consists out of: 1 - Tensol ASB 6 ton decoiler - max coil length: 1500 mm 2 - Straightening unit - 4 + 3 rolls - cap: 2 mm 3 - Slitting unit - 4 slitting heads - max length: 1500 mm - cap: 2 mm 4 - Shear: - max length: 1500 mm - cap: 2 mm nbsp; Max sheetwidth: 1500 mm Sheetstrip thickness : 2 mm Max weight coil: 6 ton

Slitting line Fimi 1500×2.5mm x15t (A3783) Manufacture FIMI ITALY Year 1990 Strip width Min. 200 mm Max. 1500 mm Strip thickness 0.3 – 2.5 mm Coil weight Max. 15 t Coil- Max. 1500 mm Speed Max. 80 m/min Working direction Right  Left The line consists of:  Decoiler Mandrel Cone-Ø 480 – 610 mm Drive / braking Hydraulic motor Lifting table Hydraulic  Coil opener / pinch roll unit Telescopic table Hydraulic No. of pinch rolls 2 Pinch roll-Ø 400 mm Driving motor 25 kw  Slitting head No. of heads 2 Shafts diameter 120 mm Main drive D.C. motor Driving power 92 kW  Scrap baller  Minimum scrap width 5 mm  Maximum number of slits 17 Slits up to 1.0 mm 5 Slits at 2.5 mm  Brakes Pneumatic Press up and dow  Re coiler Capacity 15 t Diameter 508 mm Driving power 120 kw  Term style 4 arms x 15 ton

STEP-MET NCW 1250 X 1.5 slitting line built in Poland in 2011, is used in the process of slitting thin steel sheets with a maximum thickness of 1.5 mm into equal-sized stripes. The material is slit longitudinally by high-quality cutting rollers, which guarantee the highest product quality while making optimum use of the raw material. The NCW 1250 X 1.5 slitting line consists of several modules, including, among others, an easy-to-operate control cabinet that allows adjustment of the operating speed and cutting width. The STEP-MET slitting line consists of the following components: – sheet metal decoiler – sheet metal winder – control cabinet Technical data of the STEP-MET NCW 1250 X 1.5 slitting line - maximum sheet metal thickness: 1.5 mm - maximum sheet metal width: 1250 mm - minimum sheet metal width: 25 mm - maximum sheet metal coil weight: 6 t - cutting speed ran ...

Used Mechanical Press MOSSINI 200 ton equipped with electronic feeder and decoiler dimension table 1400 x 750 mm dimension slide 900 x 650 mm stroke min/max 4-180 mm stroke par minute 20-50 spm electroni Feeder 400 x 2 mm model RNM - CE Marked

Two (2) aluminium roll forming production lines for the production of spacer bars for double glazing. - Dimension of machines: 18-20m length and 4m width - Dimension of welding unit and cooler: 4m length and 2m width - Min. and max. speed: from 90m/min up to 170m/min - Energy power from 76kwatt up to 120kwatt Each line consists of the following parts: 1) Decoiler 2) Base machine 3) Welding unit EMMEDI 4) Cooling unit 5) Degreasing unit 6) Electronic flying shear 7) Exit Bench The groups of rollers available per type of product are as follows: For the production of bendable spacers with height 6,5mm: 5,5 8,5 9,5 11,5 14,5 15,5 19,5 Number of groups: 7 Number of auxiliary groups 7 For the production of normal (not bendable) spacers with height 6.5mm: 5,5 6,5 7,5 8,5 9,5 11,5 13,5 14,5 15,5 17,5 19,5 Number of groups: 6 Number of auxiliary groups 3 The alumi ...

sheet width: 0320 mm coil outside dia.: 1650 mm weight max. in kg: 2000 kg width of the decoiler: 400 mm coil inside-diam. ca.: 350 - 460 mm diam. of the rolls ca.: 40 mm nomb. of straightening rolls: 7 sheet thickness - max.: 2,00 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m COVEMA-SCHWABE belt system consisting of: Reel MHM 2 - hydraulic expansion (motor 1.5kW/1500 U) - hydraulic pressure roller - with drive Feed leveling machine VRMA 32/96 The straightening head can be opened using hydraulics Intermediate ventilation with operating instructions with control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0250 mm coil outside dia.: 1800 mm weight max. in kg: 2 x 3000 kg : 3,80 mm : 470 - 530 mm : 21 : 30 mm : 4 : 18,0 kW speed: 20 m/min power capacity: 18 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double reel, reel, discharge reel, motor reel for sheet metal processing, punching machine, eccentric press, hydraulic press, automatic punching machine, motor reel, winding roll, decoiler, sheet metal unwinder -Manufacturer: Wanzke, reel height adjustable, with drive -Diameter/width: adjustable, see photos -Drive: 0.37 kW -Speed: 9 rpm -Dimensions: 1000/960/H1410 mm -Weight: 208 kg

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...

Description: Working width: 125 - 1500 mm System consisting of, -Height-adjustable coil trolley -Decoiler type HYD DEC-5-1500 -Stretching / Feed through unit -Length cutting unit -Length measuring device -Cutting shears type BKR 1600-2-S -Positioning device -Punching unit with 20 punches -Profiling unit -Double mini press brake -Outfeed roller conveyors -Sheet vacuum lifter with stacking station plate cut-off length: 6,300 mm, strip width: 125 - 1500 mm, coil internal diameter: 500 mm, coil external diameter: 1,000 mm, coil weight: max 5000 kg, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 50,000 x 3,000 x 3,000 mm

sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of  ...

Description: No.1 'HS 12 H Serial No.2337' - Automatic machine for straightening and cutting round metal wires smooth and ribbed from mm. 4 to 12, with hydraulic and flying shear cutting: with straightening system with 3-speed rotating body, obtainable by selecting the stepped pulley: with electric motor of 22KW, with soft starter for smooth starting, with 6 pairs of conveyor rollers, pressure pneumatic, for a forward speed of 30/150 mt./min., with hydraulic power unit with oil accumulation with 5.5 KW motor for fast and precise cutting. Complete with 2 sets of straightening units for quick change of cast iron jaws, set of conveyor rollers from mm. 4 to 12 and pre-selection piece counter.  Mt. 4 pallet  Nr. 1 FS-type decoiler, bell carrier with pneumatic and hand brake  Nr. 1 Bell for rolls of int. diam. Of cm. 44/78  Nr. 2 straightening units each complete with 3 cast iron j ...

Description: The set consists of the strapping tool, two batteries with charger, decoiler with strapping tape (length unknown) Approx. Onsite Dimension. (l x w x h): 700 x 400 x 1,100 mm, weight approx.: 60 kg

PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   quick die change system: yes   feedstock transport direction: right to left PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 45 kNm PRESS TABLE   table surface (left-right): 2250 mm   table surface (front-back): 1100 mm   thickness of bolster plate: 150 mm   height above floor level: 1000 mm SLIDE   slide force: 315 to   table surface (left-right): 2250 mm   table surface (front-back): 880 mm   stroke: 210 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke rate (min.): 25 /min   stroke rate (max.): 80 /min   main drive power: 60 kW SLIDE EJECTOR / CUSHION  &nb ...

SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (min.): 28 /min   stroke rate (max.): 72 /min V-RING   nominal force: 25 to COUNTER RAM   nominal force: 12 to TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 255 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 180 mm   sheet thickness max.: 5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1700 mm   space requirements -front/back-: 2420 mm   total height: 2420 mm   total weight approx.: 6000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   leveller unit: optional  ...

CONTROLS   PLC SIEMENS S5 PRESS DESIGN   drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 400 to   nominal work capacity: 32 kNm PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 990 mm   thickness of bolster plate: 200 mm   height above floor level: 800 mm   opening in bed (left-right): 2250 mm   opening in bed (front-back): 280 mm SLIDE   slide force: 400 to   table surface (left-right): 2600 mm   table surface (front-bac ...

SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min  &nbs ...

CONTROLS   PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN   drive system: servomechanic   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 70 mm   stroke rate (max.): 140 /min COUNTER RAM   nominal force: 625 to   stroke: 25 mm V-RING   nominal force: 1250 to   stroke: 25 mm TOOL DIMENSIONS   lower table (left-right): 600 mm   lower table (front-back): 600 mm   upper table (left-right): 600 mm   upper table (front-back): 600 mm   shut height max.: 380 mm   ram adjustment: 125 mm STRIP-FEEDER   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step min.: 0.1 mm   feeding step max.: 300 mm   sheet length min: 2500 mm CR ...

CONTROLS   PLC BECKHOFF PRESS DESIGN   drive system: knuckle-joint   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 67 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 125 to V-RING   nominal force: 125 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 560 mm STRIP-FEEDER   feeder type: roll feeder DIMENSIONS / WEIGHTS   total weight approx.: 14000 kg ATTACHMENTS -FINEBLANKING PRESS-   decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

CONTROLS   PLC PNEUTRONIC PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 13 mm V-RING   nominal force: 75 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm STRIP-FEEDER   feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMEN ...

CONTROLS   PLC SIEMENS S5 SLIDE   total force (nominal): 160 to   stroke: 60 mm COUNTER RAM   nominal force: 80 to V-RING   nominal force: 80 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 600 mm   shut height max.: 335 mm   ram adjustment: 125 mm   distance between columns (H-frame): 630 mm   passline opening (free passage in side columns): 270 mm CROP SHEAR   cutting force: 150 kN DIMENSIONS / WEIGHTS   total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machi ...

CONTROLS   PLC SIEMENS S7 SLIDE   total force (nominal): 250 to SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s   return velocity max.: 200 mm/s COUNTER RAM   nominal force: 63 to V-RING   nominal force: 100 to TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 360 mm ATTACHMENTS -FINEBLANKING PRESS-   light barrier: yes   closed cabin: yes   decoiler: optional   leveller unit: optional   waste cutter: yes   slug separator: yes

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 350 mm   table surface (front-back): 330 mm SLIDE (MECHAN. PRESS)   stroke rate (min.): 250 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3800 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to SLIDE (MECHAN. PRESS)   stroke rate (min.): 200 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 221 mm   sheet width min.: 58 mm   sheet thickness max.: 8 mm   sheet thickness min.: 1 mm   exterior coil diameter max.: 2100 mm   exterior coil diameter min.: 1600 mm   internal coil diameter max.: 610 mm   internal coil diameter min.: 508 mm   coil weight max.: 6000 kg PRODUCT (PROFILE, TUBE)   external diameter min.: 22 mm   external diameter max.: 65 mm   length min.: 4500 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 100 m/min   feedstock transport direction: left to right Line consists of: - Band Preparation VAI-SEUTHE BV  ...

OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 400 mm   sheet thickness max.: 5 mm   coil weight max.: 4 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 4 to   stroke: 550 mm DECOILER   sheet width max.: 400 mm   sheet width (min): 30 mm   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet thickness max.: 5 mm   sheet thickness min.: 0.5 mm   number of leveller rolls: 9   diameter of leveller rolls: 50 mm   diameter of feed rolls: 150 mm   feed velocity min.: 0 m/min   feed velocity max.: 50 m/min STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 400 mm   ...

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 450 mm   sheet width min.: 90 mm   sheet thickness max.: 13 mm   sheet thickness min.: 2 mm   exterior coil diameter max.: 1900 mm   exterior coil diameter min.: 1100 mm   internal coil diameter max.: 760 mm   internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 30 mm   external diameter max.: 140 mm   wall thickness min.: 2 mm   wall thickness max.: 12 mm   length min.: 4000 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min   feedstock transport direction: left to right Line consis ...