deckel table used for sale

Technical description : CLAMPING/ MOUNTING TABLE - Length 2600mm - Width 1500mm - Height 250mm

Stainless steel plastic work table PAGUS table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! replaceable shelf cable duct at the back Dimensions: 1300 x 700 x 790 mm

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rail guide table, linear unit STAR (REXROTH) 1460-405-00 ID no. 73449 Working area approx. 0...600 mm table: 450 x 320 mm Drive shaft: Ø 16 mm used, tested ! Dimensions: 1480 x 360 x 90 mm

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm

Rail guide table, linear unit STAR (REXROTH) 1460-405-00 ID no. 99357 Working area approx. 0...1300 mm table: 320 x 320 mm Drive shaft: Ø 19 mm used, tested ! Dimensions: 2050 x 375 x 90 mm

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

table length:630 mm table width:200 mm no. of flutes:3 weight of the machine ca.:55 kg

weight of the machine ca.:50 kg dimensions of the machine ca.:660 x 460 x 280 mm no. of flutes:3 groove width:14/24 mm surface area:570 x 460 mm

table diameter:500 mm clamping slots:6 x 14 mm weight of the machine ca.:190 kg dimensions of the machine ca.:500 x 650 x 300 mm

Rail guide table, linear unit STAR (REXROTH) 1460-305-00 ID no. 60221 working area approx. 0...380 mm table: 320 x 225 mm drive shaft: Ø 14 mm with limit switch and position sensors ! used, tested ! Dimensions: 830 x 410 x 95 mm

table diameter:250 mm groove width:12 mm weight of the machine ca.:47 kg dimensions of the machine ca.:500 x 450 x 150 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Work Table, Clamping Table, Welding Table, Machine Table GEORG 5400 mm Box profile: 160 x 90 mm Height: 760 mm Center groove over 8 profiles 40 x 25 mm Dimensions: 6350 x 1000 x 760 mm Weight approx. 4 ton

table diameter:200 mm groove width:12 mm weight of the machine ca.:25 kg dimensions of the machine ca.:350 x 300 x 170 mm

Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping surface: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm Hole spacing at the base: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 7,770.00 for two gluing units: EUR Price on request Delivery time: approx. 4 weeks

Universal clamping table, swivel, tilt and swivel table, T-slot plate PAGUS clamping surface: 630 x 270 mm 5 grooves groove width: 12 mm table can be tilted back and forth from 90°, tilted back and forth by 30° table can be tilted left and right by 15° and swivelled to the left and right by 45° New !' Dimensions: 650 x 290 x 290 mm

Magnetic clamping table, electric PAGUS Ø 500 mm outer diameter: Ø 500 mm Operating voltage: 24 V DC current consumption: 6,00 mm 2 A Insulating surface: Ø 55 mm Contact diameter: Ø 16 mm Contact spacing: 28 mm Flange diameter: Ø 235 mm Bolt circle diameter: Ø 270 mm 4x Threaded hole: M16 x 2.0, depth: 28 mm used, tested ! Dimensions: 500 x 500 x 90 mm

description: The rejection table can be used after any kind of bottle control (filling height control, empty bottle inspector). The defect bottles will be rejected with a pusher. The station was connected to a Heuft filling height control. Puscher or Inspector are not included in this position. availability: in stock width: ca. 1000 mm length: ca. 3800 mm Installation dimension: ca. 3800 mm x 1600 mm transport size: ca. 3800 x 1600 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy ma ...

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Coordinate table - rotatable BAZUS Table size 700 x 400 mm Clamping area 330 x 580 mm 3 T-slots 12 mm Travel distance approx. 400 mm Scaling 0.05 mm 1 spindle rotation = 4 mm swivel 360° with locking mechanism Overall height 195 mm Max. table load approx. 100 kg max. working pressure approx. 500 kg Dimensions L - 850 x W - 400 x H - 195 mm Weight approx. 172 kg original packaging - year of construction estimated - New - unused - - 1 piece in stock -

Offer 24518 Specifications: - Load capacity 150 kg - Pick-up crosses + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotary movement infinitely variable - Right.- Counterclockwise rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg

Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Specifications: Clamping plate dimensions: 2050 x 1000 mm Panel thickness: 170 mm T-slots: 15 / 25 mm Dimensions (length x width x height): approx. 2050 x 1000 x 170 mm The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Key data: 400 mm, 40 mm

- incl. key Specifications - Table diameter: 400 mm - Table height: 40 mm - Rotation range: 360° - Pan/tilt range: 0 - 90 ° - Max. load capacity (horizontal table): approx. 200 kg - Max. load capacity (table vertical): approx. 100 kg - Dimensions mounting plates horizontal/vertical: 375 x 500 / 375 x 255 mm - Dimensions rotary table WxHxD (table horizontal): approx. 570 x 280 x 500 mm - Net weight: approx. 200 kg

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995

Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999

Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002

Offer 17230 Specifications: - Load capacity 3600 kg - Face plate diameter approx. 1050 x 1050 mm - Face Plate mot. swivel + swivel - Face plate speed electr. infinitely variable 0.2 - 1 rpm -Mot. Right - + Left - Run - Handheld remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Handheld remote control

Offer 24037 Specifications: - Max. load capacity 150 kg - Face plate diameter 800 - min. table height in horizontal position approx. 600 mm - Max. table height in horizontal position approx. 1100 mm - Face plate hydraulically infinitely variable swivel or tilt - Right + counterclockwise rotation of the face plate - Rotary movement electr. hydt. adjustable - Welding current transmission approx. 500 A - Drive 400 V - Connected load approx. 0.75 kW - Space requirement approx. W 1700 x H 1450 x D 1000 mm - Weight approx. 900 kg

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,

Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T

Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable The scope of delivery includes: 01x Workbench frame, new Material colour: grey Workbench frame legs: Heights adjustable 01x Worktop, new Material: Multiplex Material thickness: 38 mm Overall width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Axial Dry Cooler, Güntner GFH090.2A/3-M(D) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 650kW Air temperature: 35º C. Fans: 3 pieces, 2.8kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6100x1150x1460mm Weight: 1550kg Sound pressure level: 57 dB(A) 10m distance, Year of manufacture: 2018 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

spindle diameter: 125 mm x-travel: 1.500 mm y-travel: 1.250 mm z-travel: 1.000 mm w-travel: 550 mm table surface area: 1.000 x 1.250 mm workpiece weight: 6.000 kg quill stroke: 550 mm tool taper: ISO 50 number of spindle speeds: 5-3.700 U/min. max. torque: 2012 Nm feed speeds: 1-6000 (x-Achse) mm/min feed speeds: 1-6000 (y-Achse) mm/min feed speeds: 1-6000 (z-Achse) mm/min rapid traverse x/y/z: 15/ 15/ 15 m/min dimensions of the machine ca.: 7,51 x 5,07 x 3,33 m : 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mm table load capacity: 420 kg table height: 185 mm centre height: 315 mm center hole: MK 5 mm indexing: 15 ° weight: 275 kg dimensions of the machine ca.: 600 x 850 x 200 m Rotary table in excellent condition for for horizontal and vertical use. - Serial No.: P56030 - for vertical or horizontal use - Indexing every 15° or continiously variable by clamping - mech. Hand wheel with scale - Center bore taper MT 5 - Hand Lever with 3x indexing discs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 160 mm chucking diameter: 160 mm positive location each: 15 ° weight: 31 kg dimensions of the machine ca.: 400 x 300 x 150 mm - Chuck with 15° indexing - Counter jaws - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross transport trolley for rails + scissor lift table with castors Brand: WTT Length 3000mm

Lg.Nr. 25075 Mot. Welding rotary and tilting table Specifications: - Load capacity 1000 kg - Face plate diameter 800 mm - Face plate can be tilted by motor - Rotary movement electr. infinitely variable 0 - 250 cm/min - Welding current transmission 650 A - Drive 400 V / 2.8 kW - Table height in horizontal position approx. 1100 mm - Re- + counterclockwise rotation - Space requirement approx. W 1200 x H 1100 x D 1500 mm - Weight approx. 850 kg

Brand Hegla Type Cutting table Layered Fashion model VSG-H Serial Number 1104 Construction year Jun-95 Weight 3 tons Assets 19 kW Air pressure 6 bars Water pressure: 50Hz Length mm 3700 Width mm 3400 Working height mm 980 Min.-max. glass thickness 2 x 3mm to 2 x 6mm Number of cutting heads 2 cutting heads Separation heating and air cushion Automatic sequence for cutting, breaking, heating and separating functions. Electric connection 380/ 400V Photos/film available: Photos available

x-travel: 1600 mm : ja weight of the machine ca.: 13,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.