deckel table used for sale

Key data: 880 mm, 630 mm, 630 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

The machine is in good technical condition; testing is possible by prior arrangement. Spindle speed: 12,000 rpm. Travel ranges: Z 510 mm, Y 510 mm, X 835 mm. Feed rate: 30 m/min. Tool holder: SK 40. Tool magazine capacity: 30 stations. Table load capacity: 800 kg. Table dimensions: 1000 x 560 mm. Overall dimensions including chip removal system: approx. 4300 x 2500 mm (footprint). Machine weight: approx. 4450 kg. Coolant system with belt filter unit, 20 bar. Maintenance/repair history: -Tool changer adjustment: 11/2025 -Coolant rail: 11/2024 -Coaxial valve, power chain: 10/2024 -X-axis ball screw replacement, new motor belt, new lubrication dispenser: 10/2024 -HDD: 7/2023 -X-axis cover plate: 2/2023 -Rotary union: 4/2022 -Gripper set: 5/2022 -Spindle braking resistor: 5/2022 -Spindle refurbishment by Vopss: 10/2020

The machine is in good technical condition; it can be tested by prior arrangement.

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm table surface area: 700 x 460 mm spindle taper: SK 40 spindle turning speed range: 31,5 -5000 U/min spindle drive: 5,5 kW quill stroke: 80 mm vertical head swivelling: +/- 90 ° control: DIALOG 11 feeds x/y/z -stepless: 3000 mm/min rapid traverse: 6 m/min total power requirement: 13,8 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 2,73 x 2,0 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quil retraction, dividing unit HOFFMANN, RW/NC 125 L, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 800 mm, 500 mm

Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg

Key data: 500 mm, 420 mm, 380 mm

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions

Key data: 850 mm, 520 mm, 475 mm

CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm control: 810 D 3D ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 8.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 DIN 69871 work table:: table surface area: 1.200 x 560 mm max. table load: 1.000 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change time: 1,6 sec change-time chip to chip: 7,0 sec feeds:: rapid traverse: 25 m/min total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Chip conveyor: Automatic Tool Changer: Coolantsystem: Spray gun: elektr. hand wheel: Signal-Light: CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours  ...

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light

with 2-axis digital display, Fabr. HEIDENHAIN, with angle milling head, 2 dividing heads, additional clamping table, counter holder, 3-jaw chuck, various interchangeable wheels, machine light and steel transport trolley

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device, machine light, angle milling head and counter holder

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 950 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Infinitely variable feeds and rapid traverse in all 3 axes Fixed angle table Coolant equipment Tailstock with counter bearing Several toolholders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition; it can be tested by prior arrangement.

Key data: 1040 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

Key data: 800 mm, 700 mm, 600 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 700 Z 600 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface Automatic Swivel Milling Head ( HORIZONTAL + VERTICAL ) Universal tool changer with 30 magazine positions as double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel IKZ – 40 bar Chip conveyor Rotoclear Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Swarf Spray Gun Operating Instructions

CONTROLS   CNC controls GRUNDIG DIALOG 12 WORKING RANGE -CUBIC-   X-axis travel: 800 mm   Y-axis travel: 550 mm   Z-axis travel: 500 mm SPINDLE / HEAD   spindle revolutions (max): 5000 /min   tool fixture: ISO SK 40 DIMENSIONS / WEIGHTS   total weight approx.: 4500 kg The machine needs a new control card (price €2,000).

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840 D control: Powerline Shop Mill table surface area: ø 630 x 500 mm table swivelling +/-: 110/5 Grad spindle taper: SK 40 spindle turning speed - stepless: 20 - 10.000 U/min spindle drive: 13 kW max. torque on the spindle: 82 Nm feed speeds: max. 20.000 mm/min rapid traverse: 24 m/min no. of tools in magazin: 30 wotkpiece diameter with 2 vacant positions: max. 130 mm tool length - max.: 290 mm weight of tools max.: 6 kg total power requirement: 17 kVA weight of the machine ca.: 4,05 t dimensions of machine L x W x H: 2,21 x 2,12 x 2,15 m = 5-axis machining center (5 axis simultaneously) with 2-axis NC swivelling rotary table - only 9.609 spindle hours - - the machine was used for sample and prototype production, 3D machine model for kinematic simulation in a CAM programming system (available in IGES and STEP format ...

This 3-axis DMG DECKEL MAHO DMU 105 V Linear was manufactured in 2004. It features a robust CNC control system, HEIDENHAIN iTNC 530, and has a machine weight of approximately 12,200 kg. The required installation space is 5,700 × 4,700 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 105 V Linear vertical machining centre we have for sale. Contact us for further details.

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Control: Dialog 11 total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3 x 4 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Cover Maho DMC 635V ecoline BJ 2013

Key data: 640 mm, 600 mm, 500 mm

Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions

Manufacturer/ Type: Deckel Maho, DMU 60 P hi-dyn, 5 Axis Milling Machine Year of Make: 2002 Information: Tool changer for 60 SK 40 holders, Mill Plus control, Current condition: The Y axis is out of round by 0.03mm, the machine is not working at the moment because the hard drive has to be replaced Availability: Immediately Accessories: 3D probe, machine manual

Control Heidenhain TNC 124 Travel X/Y/Z: 500 x 400 x 400 mm Spindle speed 4,500 min-1 Tool holder SK 40 Manual rotary table with swivel axis 700 x 500 mm

x-travel: 885 mm y-travel: 600 mm z-travel: 450 mm b-axis: +20/-110 ° c-axis: 360 ° spindle speed:: 18.000 U/min spindle drive: 15 kW Tool adapter: HSK-A63 table diameter: 600 mm Tools changer: 30 fach/tools chip conveyor: kW Internal cooling system: 401 bar Control: HEIDENHAIN iTNC 640 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m DMG HSC 70 – 5-Axis Machining Centre - 5-axis machining centre with linear motors - HEIDENHAIN iTNC 640 - Portal-type construction - Electrospindle with 18,000 rpm - 30-tool automatic tool changer - Probes included for tool and workpiece measurement - Internal coolant supply at 40 bar pressure - BLUM laser tool measurement system - DMG TS649 workpiece measuring probe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm control: TNC 426 table-size: 900 x 550 mm taper ISO: SK 40 speeds: 18000 U/min total power requirement: 50 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3,3 x 2,43 x 2,98 m DECKEL MAHO DMC 70 V Hi-dyn machining center featuring: 30-station tool changer Chip conveyor Oil mist filtration system Transport dimensions: 650 x 243 x 297 cm, 8 tonnes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 640 mm, 640 mm, 640 mm

Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamping - Automatic manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Working Range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual transmission with clockwise/cou ...

CNC Universal – Machining Center DECKEL MAHO DMU 40 eVo NEW DMG Design with track control Heidenhain iTNC 530 HSCI Year of Make: 2012 Travel: X 400 Y 400 Z 375 Speed range: 20 – 18,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 30-fold tool changer with double gripper 3 D probe Renishaw PP 60 optical Electronic handwheel Operating mode 4 Heidenhain Table Pushbutton TD 110 ( Length Measurement ) IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Direct displacement measuring system Rinsing gun for chip rinsing Rotoclear Oil mist extraction 3-Piece Height Adjustable Machine Shoes Operating Instructions Signal light 4 colour

Year of construction: 2007 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0º/190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Max. workpiece weight kg: 2000 Table rotation speed rpm: 500 max. torque Nm: 5600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 28/19(40/100%DC) Spindle torque Nm: 727/492(40/100%DC) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Chip-to-chip time s: 5 Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Mi ...

Key data: 1250 mm, 1000 mm, 1000 mm

Refurbished by DMG in 2011 Control: HEIDENHAIN iTNC 530 Tool holder SK50 with tool storage for 60 tools Max. spindle speed: 8,000 1/min 30kW spindle with swivelling milling head (B-axis) Infrared probes NC rotary table with pallet change Total weight: 24,000 kg Table load: 2,000 kg

x-travel: 1035 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain iTNC530 total power requirement: siehe Dok. kW weight of the machine ca.: ca.5,2 t dimensions of the machine ca.: siehe Dok. m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 935 mm, 850 mm, 650 mm

Commissioning 2013 with RS 3 rotary storage tank (3 pallets) Control: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Total weight: 14,000 kg Spindle speed (max.): 18,000 rpm Number of slots in tool magazine: 60 Table load: 1,000 kg Heidenhain Infrared Probes Blum Laser Measurement 3D Quickset Air Cleaner electric handwheel

Year of construction: 2004 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Maximum workpiece size (D x H) mm: H=1600 Max. workpiece weight kg: 2000 Table rotation speed rpm: 400 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool measuring arm Mist collector Machine running times Under power: 92687 Spindle Working: 40245 Basic machine dimensions / weigh ...

clamping length: 170 mm centre height: 110 mm : . 3-jaw-chuck diameter: 170 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Technical specifications are based on information provided by the manufacturer or previous operator and are therefore non-binding for us. Subject to prior sale, our standard terms and conditions of business and sale apply exclusively. About us Over 400 machines in stock Over 15,000 m² of warehouse space, 70-tonne crane capacity Over 10,000 accessory items for your workshop If you are looking to sell machines, production lines, or your entire facility, please get in touch with us. You can find further offers on our website. Viewings are possible by appointment. We look forward to your visit. The Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine / DECKEL FP 33 incl. Heidenhain digital display & accessories - COMPLETE SPECIFICATIONS YOU PHOTO -Heidenhain digital display -Miscellaneous Accessories -Documentation -Crane Dimensions: LxWxH 2.5x2x2 meters / Weight 5000 KG

Ref. -No.: 10468 Manufacturer: DECKEL MAHO Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabine ...

Ref. -No.: 10659 Manufacturer: DECKEL MAHO Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool lemmung, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works

Ref. -No.: 10544 Manufacturer: DECKEL Year of construction: 1990 Type of control: N/A Control: N/A Storage location: Halberstadt Country of origin: Germany Power Capacity: 1,6 / 2,0 kW Tool Taper: 20 mm Ø Space requirements: 1600 x 1350 LxWxH (mm) Feed rate: 0-350 mm / min Vertical portal passage, clamping table - lower beam cross member: 300 mm Distance table - spindle nose with vertical milling spindle: 50 mm Distance table - spindle nose with horizontal milling spindle: 450 mm Machine Height: 1950 mm Weight: 2,1 t Pre-milling spindle: 80...1000 min-1 Collets: 20 O taper bushing: Morse 1 Touch lift: 12 O Speed of the milling motor: 1400 RPM Further information: - Optical testing device - Pre-milling spindle - Model milling device - Rotary table - Inclined spindle - Mirror image milling device - Reduction and enlargement device - Roller engraving devices - Machine vice hydraulic clamps ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 kW Torque: 130 Nm tool taper: BT 40 DIN 69872 work table:: table surface area: 1.250 x 700 mm max. table load: ca. 500 kg table diameter: 700 mm T-slots: 11x 14 x 63 mm max. table speed: 15 min/-1 tool magazin:: number of toolpositions: 32 (2x 16) pos. tool taper: BT 40 max. tool diameter: 80 / 130 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8,0 kg feeds:: feed speeds: 20 - 15.000 mm/min rapid traverse: 12 m/min total power requirement: 30 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 4,0 x 3,0 x 2,5 m Documents: swarf management system: Coolantsystem: NC-rotary table: elektr. hand wheel: Automatic Tool Changer: tool setting: CNC - M ...

x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis

x-travel:780 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:10 t Number of axles:5 St. spindle turning speed range:20-12.000 U/min numbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mm Round Table B-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t

x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.

x-travel:630 mm y-travel:560 mm z-travel:560 mm total power requirement:10 /15 kW weight of the machine ca.:6500 kg dimensions of the machine ca.: 4,4 x 5,4 x 2,9 m Table dimensions:1000 x 610 mm Loading:400 kg rapid traverse::X 26, Y 26, Z 20 m/min speeds::20 - 12.000 min -1 tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St. control:CNC MillPlus/TNC430 Documents:vorhanden

x-travel:560 mm y-travel:500 mm z-travel:450 mm total power requirement:16,5 kVA weight of the machine ca.:2700 kg dimensions of the machine ca.:2,30 x 3,0 x 1,90 m control:Grundig quill stroke:80 mm tool taper:SK 40 spindle speeds::40..4000 1/min feed:2 .3600 mm/min rapid traverse:4000 mm/min Documents:vorhanden

x-travel: 980 mm y-travel: 630 mm z-travel: 630 mm Control: iTNC 530 total power requirement: 10 / 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 442,5 m Equipment: Electronic handwheel Operating mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-position tool magazine Rigid table 1250 x 700 mm Chip conveyor Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.