deckel s1 used for sale

Sleeve packer / film band roller including stacking unit for stacking products into 1-5 layers and/or in multi-rows. Suitable for cigarette packs, soap, toothpaste, stationary, etc. Fully automatic infeed of products, automatic stacking/collating, automatic film sleeving and automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. - Technical Specifications: 380V, 2kW | 6Bar / 0.1m?/min | max. speed of the machine in neutral: 15 cycles/min | max. pack dimensions (mm): L400xW300xH330 | sealing blade length: 700mm | machine dimensions (mm): L1380xW2700xH1900 | weight (net/gross): 500/580kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for custo ...

Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications sleeve packer: max. speed of the machine in neutral: 20 cycles/min | max. product dimensions: L(unlimited)xW(W+H max. 600mm)xH(max. 300mm) | film width: max. 1600mm | length of sealing blade: 700mm | operating temperature: up to 200?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 1.8kW | compressed air: approx. 6-8bar | machine dimensions and weight: L2014xW1488xH1850mm, 600kg. Technical specifications shrink tunnel: max. product dimensions: L(unlimited)xW400xH300mm | operating temperature: up to 400?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 20kW | chamber dimensions: LxBxH: 1500x600x4 ...

Sleeve packer/film band roller for film wrapping of large products or product bundles packed on cardboard trays or loose. Automatic infeed by conveyor and automatic outfeed through shrink tunnel (optional available: SHRINKtunnel-PE-XL). - Technical specifications: MITSUBISHI/Japan PLC | 380V, 2kW | 6.0bar / 0.1m?/min | max. speed of the machine in neutral: 14 cycles/min | max. product dimensions (mm): L400xW300xH330 | sealing blade width: 700mm | machine dimensions (mm): L1360xW2720xH1900 | weight (net/gross): 465/550kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are avail ...

Number of working hours: 3184 h weight max.: 8 t weight of the machine ca.: 13400 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

7-axis turn/milling machine Bumotec S192 – with fully automatic LNS chip conveyor and integrated mud pump Oil cooler Axle cooler Milling spindle 30000 revolutions/min. Breuning Short Bar Loader Elbaron Suction Includes 2 rotary holders and 3 drill holders with HSK 40A adapter Includes 2 collets Counter spindle can be used with 2 jaw chuck or collet E173

An older precision cylindrical grinding machine Kellenberger including accessories is available. Centre width: 200mm, centre height: 125mm, max. workpiece weight: 3kg, max. workpiece diameter: 245mm, max. workpiece length: 130mm. An on-site inspection is possible.

An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible.

Dosing pump with 90 l/h flow rate Properties: Length 370 mm Width 200 mm Total height 430 mm Volume 90 L Engine power 0.43 kW Manufacturer: LEWA ecodos Manufacturer Serial No. EEK 0090 S11

Tool holder: MK 2 Drilling capacity in steel: 18 mm Rotational speeds of the drilling spindle per minute: 220/ 290/ 440/ 720/ 950/ 1450/ Weight: approx. 300 kg

Height=0.43 m, Overall length= 0.24 m, Overall width= 0.45 m, Net weight= 27 kg,

Height=0.43 m, Overall length= 0.24 m, Overall width= 0.45 m, Net weight= 27 kg,

feed pressure: 10.0 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15.0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RECON Part Number: 3773314500 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 3773314600 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 3773205500 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 3773230602 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 3773304201 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 3773221101 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 3773304101 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

General SKU204X023 LocationBarneveld MakeA.T Sack Fillers Ltd TypeS1000 AF Lux No.18945 Year of construction2018 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Auger fillercheck With screw dosingcheck Number of dosing heads:1 CapacityMax 30 kg Screw diameter60 mm With motor1,5 kW, 380-420/220-240 volt, 2890 rpm With hoppercheck With mixer in hoppercheck 0,37 kW, 380-420/220-240 volt, 2730 rpm Information Mounted on wheelscheck CEcheck With switchgearcheck Floorspace1,70x0,90 m Total height2,00 m Extra Specificationsvalve sack filler. With Vibtec vibro table, Mettler Toledo digital scale pressure 4 bar. cap. 5-30 kg Powder fillersA.T Sack FillersPackaging machines > Powder fillersBrand > A.T Sack Fillers What you can expect from Foeth: -- Machine is in working condition -- At a reduc ...

Engine Brand: MITSUBISHI, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 761 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s12a2-mpta-used /419, , = More information =, , Type: Engine, Empty weight: 3.540 kg, Type number: S12A2-MPTA

Engine Brand: MITSUBISHI, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 761 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s12a2-mpta-used /464, , = More information =, , Type: Engine, Empty weight: 3.485 kg, Type number: S12A2-MPTA

Engine Brand: MITSUBISHI, Conditie: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Beige , Working Hours: 45000 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 634 Kw, Rated Speed: 1940 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-s12a2-c2mptk-us ed/348, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 7.500 kg, Type number: S12A2-C2MPTK

Work platform self-propelled articulated work platform with boom PB Type: S171-12ES Year of Make: 2013 Load capacity 400 kg Platform dimensions approx. 2.79 x 1.17 m Platform extension approx. 100 cm Transport dimensions approx. 3.28 x 1.22 x 3.28 m (height railing folded down: 2.32m) Weight approx. 5120 Kg Working height approx. 17.1 m Platform height approx. 15.1 m Movable up to 17.1 m working height (indoor use) Self-leveling support Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging c ...

sheet width: 3050 mm plate thickness: 16 mm distance between columns: 3050 mm : 15-1000 mm cutting angle adjustment: ja ° cutting gap adjustment: ja mm connected load: 30 kW weight of the machine ca.: 14,.5 t dimensions of the machine ca.: 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 635 KW

New Mitsubishi Marine Engines. Mitsubishi S6R MPTAW-4 , 635Kw1800rpm auxilairy [ 2022 ] un used. Mitsubishi S6R Z3 MPTAW-4 , 635Kw1800rpm auxilairy [ 2019 ] un used. Mitsubishi S16R-2 T2 MPTAW-3 , 1450Kw1350rpm propulsion [ 2018 ] unused. All engines have only type approval All engines are unused and stored properly as required by the manufacturer. Manuals and the primary filter set are present. S6R Engines have a Woodard Pro Act and a 2301E control box. S16R-2 is provided with a Woodward PSG governor.

gebr. Table milling machine ALDINGER Type: S 15 Year: 1959 Engine power: 4 / 5 hp (2.94 / 3.7 kW) Doubling the speed via selector switch Left/right rotation via selector switch 6 Speeds: 2,800 / 3,500 / 4,500 / 5,600 / 7,000 / 9,000 rpm Height adjustment by handwheel Extraction connection: 120 mm Table size: 95 x 105 cm Table height: 85 cm 525 kg Unoverhauled - ACTUAL state from carpentry dissolution FIXED PRICE

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 74.5 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 86.5 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 124 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/caterpillar-c4-4-s1m-generator -86kva-used/42264, , = More information =, , Type number: C4.4 S1M GENERATOR 86KVA

internal diameter: 99999 mm grinding depth: 99999 mm swing diameter: 99999 mm grinding diameter: 99999 mm grinding length: 200 mm centre height: 175 mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic gravimetric dosing of powders ranging from free-flowing to very poorly flowing (e.g. clumping, moist, or bridging) as well as fibers, flakes, and other bulk materials. Fill weight: max. 50 kg depending on the dosing screw. Filler comes with a lot of accessories such as vacuum conveyor PIAB, various dosing screws, etc. PLC: Siemens SIMATIC S7-200.

Lifting kneader Diosna S 120 - With 1 automatic timer - with 2 gears - With stainless steel boiler - With flour dust cover - Mobile on castors with brake -Kettle diameter inside approx. 75cm -Shell height inside approx. 42.5cm

Key data: 1500 kN, 45 mm

Stork S+S1500-850 Year of Make: 2011 Clamping force: 150 tons. Screw diameter: 45 mm Max opening distance: 480 mm Injection pressure: 2100 bar used for PP thin-wall packaging

General SKU391X1060 LocationBarneveld CEcheck MakeMettler Garvens Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacitymax 20.000 gram Capacitye=d= 5 gramm Information TypeS 100 Mach.No.151014 Year of construction2004 Floor space1,30 x 1,15 m Total height1,25 m Weight280 kg Extra Specifications Belt size: 1100 x 500 mm Max. weight: 20.000 g Min. weight: 800 g Max. temp.: 5 °C/ 40 °C Belt speed: 33-12 m/minMiscellaneous transportMettler GarvensConveying systems > Miscellaneous transportBrand > Mettler Garvens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

Thermostat housing incl. thermostats and entire interior Mitsubishi No.: 37546-23701

An industrial articulated robot Mitsubishi including control unit, teaching box and work table is available. Payload: 3.5kg, axes: 6, reach: 642mm, repeatability: +/-0.02mm, upper arm length: 245mm, forearm length: 270mm, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Schneider Sepam S10UD XXX JXX XNT + voltage connector CCT 64

Find more here - / Contact us at -

For sale is a compensator for a Mitsubishi S12R Condition: new (traces of storage available) Part Number: 47920-00700

This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information.

This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine.

This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine.

This WEBER LCE-2000-S-S1350 was manufactured in 2001. It features a wide-belt sanding machine with a working width of 1350 mm, a sanding unit plus a cleaning brush, and sanding shoes with pressure beam segment control. The cutting speed of the sanding belt is infinitely variable, and it has a 15 kW frequency-controlled drive. Maximum feed speed is 14 m/min. Contact us for more information about this machine.

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S150iA was manufactured in 2015. Its an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. Its equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information.

Cerescon Sparter S121 – Autonomous Asparagus Harvesting Robot, The Cerescon Sparter S121 is an advanced autonomous asparagus harvesting robot, designed to revolutionize labor-intensive harvesting processes. Developed with cutting-edge sensor technology and precision robotics, this machine enables efficient, high-quality, and selective harvesting of white asparagus., Key Features:, - Automated Harvesting: Fully mechanized system reduces dependency on manual labor., - Selective Harvest Technology: Detects asparagus underground and harvests at optimal maturity stage., - High Precision Sensors: Advanced probe system identifies asparagus without damaging the crop., - Improved Product Quality: Harvesting below the surface prevents discoloration and ensures premium quality., - High Efficiency: Capable of continuous operation, significantly increasing harvesting capacity., - Track-Based Mobili ...