129,014 used machines on RESALE, but how to find them? Machine Search
Strip cylinder UNIVER S1022321080M stroke 1080 mm Pmax. 10 bar Dimensions: 1330 x 67 x 55 mm
Ball valve with pneumatic valve actuator AUTOMAX SUPERNOVA SID063 S10 PN 63 DN 50 Dimensions: 220 x 190 x 110 mm
For sale are intercoolers from a Mitsubishi S12R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: S12R Part Number: 37755-10101 Alternative: 37755-20100 37755-20010
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-44803-8
EX rental device, UVV test valid until 8/2026 Auction-ID: A1-45690-7
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-45832-9
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-45834-8
Fully automatic coffee machine LA CIMBALI S15 CP10, 2 grinders, 1x powder container, dimensions approx. 350 mm wide x 605 mm deep x 715 mm high, weight approx. 50 kg, 2 x keys, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-45833-157
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-45834-157
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-45833-8
Stahlblech lackiert Innenliegende Rohre: 200 mm lang à 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock
Tool milling machine DECKEL FP2A, S/N 2819-0563, T-slot table approx. 400x600 mm, machine vice, control DECKEL TNC 355
Sold with various tools and documentation. Technical Information Main training Maximum speed: 9,000 rpm Motor: AC Servo Motor 100% ED engine power: 4.96 kW Engine power at 40% ED: 6.94 kW Continuously programmable speed: 20 – 9,000 rpm Torque/power diagram Speed range: 20 – 9,000 rpm Axis drive AC servo motors for X, Y, Z axes Programmable feed rate: up to 10,000 mm/min Input Unit: 0.01 mm Fast (fast) speed: 12 m/min Measurement system X, Y, Z axis resolution: 0.001 mm Position Tolerance (Direct Measurement): 0.010 mm Work Area X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Work table Round table with swivel axis Clamping surface: Ø 700 x 500 mm T-slot spacing: 63 mm T-Slot Width: 14 H7 Centering bore: Ø 30 H7 Rotation range: 360° Table lock ...
CNC vertical machining center for machining metal parts. Numerical control: Siemens 810D Strokes: X 630 mm / Y 500 mm / Z 500 mm Table: 800 × 500 mm Maximum table load: 500 kg Spindle cone: ISO 40 Spindle speed: 10,000 rpm Auction-ID: A1-44765-248
Deckel FP2LB Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP2LB Year of manufacture: 1977 X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Approx. dimensions (L x W x H): 1750 x 1700 x 1750 mm Includes various accessories and documentation Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-21
Deckel 2038 T-Slot Clamping Table Type: T-slot clamping table Manufacturer: Deckel Model: 2038 Table size: 710 x 430 mm T-slot width: 14 mm Number of T-slots: 5 Maximum table load: 200 kg Table rotation: 360° Swivel range (left/right): ±45° Tilt range (toward/away machine): +45° / -15° Weight: approx. 250 kg Approx. dimensions: 800 x 600 x 700 mm Machine compatibility: Deckel FP3 / FP4 tool milling machines Universal swivel, tilt and rotary table Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-2
Deckel FP2 Milling Machine Component Type: Milling machine component Manufacturer: Deckel Model: FP2 Length: approx. 100 cm Height: approx. 31 cm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-59
Heidenhain TNC 426/430M control Racing and Board: X-axis (longitudinal): 1,000 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 600 mm Table surface: 1,200 x 600 mm Maximum Table Load: 800 kg Speed 10,000 rpm (belt or direct drive) Tool Mount: SK 40 / BT 40 Spindle power: approx. 9 - 13 kW (S1/S6) Torque: ~82 Nm Fast Feeds: 30 m/min (X/Y/Z) Tool magazine: 24 spaces (basket or chain configuration with exchange arm) Tool Change Time: ~1.6 - 2.5 seconds (T-to-T) Total Weight: approx. 6,500 kg Floor space approx. 3,500 x 2,400 x 2,800 mm TOOLS NOT INCLUDED Auction-ID: A7-44885-2
CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-203
CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-44765-243
ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-207
Deckel FP3LB Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP3LB Serial number: 0554 X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 400 mm T-slot table size: 300 x 1000 mm Taper: SK40 Speed range: up to 2000 rpm Engine power: 4 kW Machine weight: approx. 1100 kg Dimensions (L x W x H): 2000 x 1200 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-18
Deckel FP33 Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP33 T-slot table size: 430 x 1000 mm Approx. dimensions (L x W x H): 2150 x 1800 x 2200 mm 5 horizontal T-slots 2 vertical T-slots Tension clamp: 90 x 90 mm x 4 T-slot width: 20 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-25
Technical data Machine Type: Milling burin grinding machine Manufacturer: Friedrich Deckel Model: SO/70-12497 Manufacturer location: Munich Configuration Documentation: Original leaflet \"Milling burin grinding machine SO\" Application: Grinding of cylindrical, tapered and pointed milling cutters Setting options: Transverse movement (vernier), longitudinal movement, rotary movement (360° / 180°), horizontal and vertical swivelling Material table: Setting values (α, β, γ) for various materials such as steel, cast iron, brass, aluminum, wood and plastics Auction-ID: A1-45711-115
DMG MORI DMU 50 – 5-axis CNC machining center Manufacturer: DMG MORI / Deckel Maho Type: DMU 50, year of construction approx. 2013 5-axis machining center (simultaneous)CNC control: Siemens Sinumerik (ERGOline Panel) Travel: approx. X 500 mm / Y 450 mm / Z 400 mm Spindle: up to approx. 10,000 rpm, tool holder SK40 Tool magazine: approx. 30 places (chain magazine) incl. approx. 25 tool holders (used) Spindle condition good, machine accuracy good Operating hours: approx. 28,000 h Machine functional, currently energized Coolant system available Chip conveyor available Complete machining center incl. peripherals Ideal for 5-axis machining in tool and mould making as well as general machining Auction-ID: 04K-92D-1
X-axis: 2500mm Y-axis: 920mm Z-axis: 820mm Machine is equipped with: - chip conveyor - through spindle coolant 40 bar - coolant filtration system - 30 position ATC Auction-ID: A1-45752-5
CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders.
CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab
Technical data Machine Type: Milling burin grinding machine Manufacturer: Friedrich Deckel Model: SO/70-12497 Manufacturer location: Munich Configuration Documentation: Original leaflet "Milling burin grinding machine SO" Application: Grinding of cylindrical, tapered and pointed milling cutters Setting options: Transverse movement (vernier), longitudinal movement, rotary movement (360° / 180°), horizontal and vertical swivelling Material table: Setting values (α, β, γ) for various materials such as steel, cast iron, brass, aluminum, wood and plastics
maximum number of results exceeded
please refine your search
2.670 € 
