deckel s1 used for sale

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA 1915 kVA generator power Generator Mecc Alte ECO46-2S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,950 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA2 2100 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 20,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTAA 2250 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R2PTAW Generator power 2500 kVA Generator Mecc Alte ECO46-1.5 L CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,300 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel

Good running used engines building year 2008

MARINE DIESEL ENGINE Reference number 20131 Brand MITSUBISHI Model S12A(N) - MPTK Power 910 HP RPM 1550 RPM Serial number 11245 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system 12-cylinder, 4-cycle, water cooled diesel engine, with direct-injection, turbocharger, air-cooler, built-up heat exchanger and sea water pump Starter Electrical Start (24V) Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Expansion tank YES Heat exchanger YES DIMENSIONS LxWxH (cm) 2439mm1482mm1596mm Weight (kg) Net Weight 5000 kg

FOR SALE MITSUBISHI S12 HPTA COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE MITSUBISHI S12 HPTA AT OUR STOCK PLS FIND ENGINE SPEC ON BELOW TYPE S12 HPTA NO. 30069 YOB 1999 POWER 890KW REV 1500 RPM WE CAN DISMANTLE ENGINE AND WOULD BE OFFER ENGINE PARTS (CYLINDER HEADS PISTONS LINERS CRANK SHAFT ENGINE BLOCK TURBO CHARGERS ETC) EX STOCK IZMIR TURKEY READY TO SHIPMENT. IF YOU'VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

4 generators 1770kava@1500 rpm 50HZ Model is kohler USA complete as u can see , Radiator Panels, on frame

FOR SALE 2 SETS YOU NR 29 / S103A COMPLETE TURBO CHARGERS AT TURKEY... TO WHOM IT MAY CONCERN; WE VE 2 SETS COMPLETE TURBO CHARGERS TO NR 29 / S103A AT OUR STOCK TURBO CHARGERS DISMANTLED FM PROPOLSUION ENGINE. PLS FIND SPECT OF TURBO CHARGERS AT BELOW TYPE: ONE NR 29 / S103A WORK NO OF T/C: 1 150 804 / 805 PLANS NO.: H 09875 TURBO CHARGERS READY TO TRANSPORT AT IZMIR TURKEY IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

DEAR'S SALE, COMPLETE YANMAR S185L-UT Std cranksaft good condition, ready for transportation Brgds Hakan KUSCU +905323642509 info@kscege.com

Type: ZHF-S15 Year of construction: 1975 Fabr.No. 1013 Boiler No. 1368GW Boiler: Content: 880 Liter permissible operating pressure: 6 bar permissible operating temperature: 100 °C Capacity: aproxx. 6000 liters/ depending on product Boiler room: 24 segment brackets: 20 Type: M23K 4571 Measurements: Height: approx. 2700 mm Length: 3800 mm Width: 2130 mm All the equipment s. photos

MITSUBISHI MARINE ENGINE - S12A2 - MPTK 910 HP - 701 KW 1940 RPM COMPLETE WITH PANEL

Used sachet machine made by Polpak S100. New 1999. Technical parameters: dimensions: - depth: 900 mm - width: 2500 mm - height: 1900 mm - weight: 340 kg - pneumatic drive, cup volume dispenser with infinitely adjustable dose size of 20-100 ml - capacity up to 3500 packages / h - foil width 100-400 mm - pouch length up to 200 mm - 380 V + compressed air supply - power consumption (maximum / minimum) 2.2 / 1.5 kW + compressed air 8 atm. 600 L / min Documentation available.

MITSUBISHI MARINE ENGINE - S12A2 - MPTK / 1940 RPM / 701 KW /940 BHP

MITSUBISHI S12 R PTA 1080 KW 1500 RPM

Engine Info Make Model MITSUBISHI building year 2000 S12H – PTA Serial No. 30166 Cylinders 12 V / Inline V Power 930 KW – 1250 HP RPM 1500 RPM Condition Running taken out Application Marine Weight (kg) 5000 KG Cooling Water

Joos Upstroke Press Type HP-S180 Platen size 2800mm wide x 1500mm deep Operating pressure 180ton 550mm daylight 1800kN Year 1985

Engine Info Listing ID 20100 Make MITSUBISHI Model S12 R MPTA T5 Serial No. Cylinders 12 V / Inline V Power 1600 HP RPM 1400 RPM General Info Condition Runner Application Marine Weight (kg) 5000 KG Cooling WATER COOLED

MITSUBISHIS12A2 MPTK940 HP1940 RPM RUNNER ENGINE EXCELLENT CONDITION AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system KEEL COOLING Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2,291 x 1,418 x 1,596 Weight (kg) 3,800 KG

Reference number 20136 Brand MITSUBISHI Model S12R- 2 MPTA SN 11955 Power 1180 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - VIDEO AVAILABLE DIMENSIONS LxWxH (cm) 2,416 x 1585 x 1807 Weight (kg) 5,470 KG

Reference number 20137 Brand MITSUBISHI Model S12R T2 MPTK (FW) SN 13885 Power 1260 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - WITH CLASS DIMENSIONS LxWxH (cm) 2,556 x 1,622 x 1,728 Weight (kg) 5,500 KG

Wrapper Fully automatic winding machine Make Böhl Type: Master S1000 VA Wrapping products, for example Single tires, piles of tyres, wire coils, drums Product dimensions Height 50 mm - 500 mm Diameter 300 mm - 850 mm Control: Siemens PLC control Machine is in good working condition

MITSUBISHIS12A2 MPTK940 HP1940 RPM RUNNER ENGINE EXCELLENT CONDITION AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Cooling system KEEL COOLING Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2,291 x 1,418 x 1,596 Weight (kg) 3,800 KG

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Reference Num.: 3384 Brand: Herzog Heymann Type: M3 + S18 Construction year: 1969 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Flachstapelanleger - Schuppenauslage - Falzwerk Typ S18 mit 4 Taschen

centre distance: 8500 mm turning diameter over bed: 1070 mm turning diameter over slide rest: 800 mm spindle bore: 128 mm turning speeds: 1,12 - 1120 U/min Control: Alan Bradley 9-series total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m 3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 4670; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 1510; Maximum lift capacity [kg]: 400

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

turning diameter: 1070 mm turning length: 8500 mm control: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mm speed: 1,12 - 1120 m/min voltage: 480 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packaging machine Beck Series Packer S 1732 - Used equipment built in 1986 -Operational The machine is equipped with a photo-electric control and regulates the work rhythm depending on the length of the packaged goods. This allows unequal parts to be packed in any order. The height and side adjustment of the machine takes place in seconds by means of a hand wheel. Functioning The machine works cycle by cycle, fully automatically with photo-electric control. The goods to be packed are introduced into the machine by means of a special infeed belt and shrink-wrapped on four sides. Oil hydraulics ensure exact operation of the welding system. The welding is carried out according to the impulse separation welding process and can be equipped with additional special welding elements. Odour nuisances are avoided by means of an exact, infinitely variable temperature adjustment of the w ...

feed pressure: 10 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15,0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer working automatically with pre- and post-filter (mounted) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 bar Effective free air delivery: 1.450 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 452 kg. total power requirement: 11,0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer working automatically with pre- and post-filter (mounted) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with B200/25 and Number: 6852884, Shrink Wrap / Foil Sealing

Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer a Mitsubishi Industry 6-axis articulated arm robot. RV Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV series offers a highly dynamic 6-axis articulated robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Power (KVA): 1400, Working hours: 20

Hitachi starter -Voltage: 12V -Type: S114-443 -Teeth: 8 -Weight: 5 kg

SPG. Regulator -Motor controller: 1-6 A -Dimensions: 190/140/H65 mm -Weight: 0.5 kg

Maximum load capacity: 800 kg Suspension class: - Adjustment range: 400-1420 mm Price: on request Year of construction 1999 We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Air Operated Double Diaphragm Pump with Top Suction Lift Made by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Made by SANDPIPER

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWABS600 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWABS600 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWANS000 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWANS000 PUMP

Air Operated Double Diaphragm Pump with Top Suction Lift Made by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Made by SANDPIPER

We are pleased to introduce our latest range of medium voltage oil transformers from the renowned German manufacturer Energeks GmbH, specially designed to meet the diverse requirements of the European energy and electrical sector. Product Highlights: Nominal power: 2000 kVA High voltage level (Gn): 20 kV Low voltage level (Dn): 420 V Adjustable control: ±2x2.5% Compliance & Certification: Fully certified and in line with the latest EU industry and safety standards. Protection Features: Equipped with comprehensive hermetic protection and a full range of displays, ensuring exceptional durability and consistent reliability. Warranty Service: Offers an extensive 5-year warranty from the date of activation, giving you peace of mind and protecting your investment. Optimal areas of application: Renewable energy systems: Ideal for the efficient conversion and distribution of ren ...

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)