136,415 used machines on RESALE, but how to find them? Machine Search
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mm table weight: 500 Kg c-axis: 0.001º ( ± 360º) 0 b-axis: 180 ° rapid traverse X-axis: 80 m/min feeds: 50 m/min spindle turning speed range: 18.000 U/min spindle taper: BT- 40 spindle drive: 30 kW Internal cooling system: 40 bar handwheel: HEIDENHAIN HR-410 total power requirement: 50 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...
2002 Deckel Maho DMU 50T still in use, can be viewed Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 600 mm, 525 mm, 200 mm
Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect
Key data: 600 mm, 525 mm, 500 mm
Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled
Key data: 600 mm, 525 mm, 500 mm
Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled
Key data: 710 mm, 520 mm, 520 mm
TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm
The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator
Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement
CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mm B-axis: 0 - 161,955 ° C-axis: 360 ° spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/min spindle power: max. 35 kW max. torque on the spindle: max. 130 Nm feeds -stepless-: bis 20.000 mm/min rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min rapid traverse B-axis: 40 U/min C-axis rapid feed: 50 U/min no. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 40 bar total power requirement: 52 kVA weight of the machine ca.: 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device The data for this ad was created with ModulMWS - the ...
x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: SIEMENS 840 C total power requirement: 12 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...
x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm Control: CNC total power requirement: 13 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor
x-travel: 630 mm y-travel: 800 mm z-travel: 750 mm control: SIN 840D sl Siemens B - axis: 360 x 0,001 ° A - axis: -200 -- +25 x 0,001 ° spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 100 % load: 28,00 kW power capacity at 40 % load: 34,00 KW max. torque at 40% / 100% load: 110 / 84 Nm tool taper: HSK 63 feed X/Y/Z/-axis: 1 - 100.000 mm/min rapid traverse X/Y/Z: 100,00 m/min feed capacity X/Y/Z: 9 / 6 / 9 kN feed B-axis: 1 - 14.400 °/min feed A-axis: 1 - 7.200 °/min size of pallet: 2x 500 x 500 mm workpiece weight max.: 400 kg max. workpiece diameter: 800 mm workpiece height max.: 800 mm tool magacine with: 63 diameter of tools max.: 280 mm tool length - max.: 550 mm weight of tools max.: 15,00 kg total power requirement: 65,00 kW weight of the machine ca.: 14,00 t dimensions of the machine ca.: 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERI ...
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 40 % load: 28,00 kW power capacity at 100 % load: 19,00 kW max. torque on the spindle: 121 / 82 Nm spindle taper: HSK-A63 B-axis: -10 - +180 ° c-axis: 360 x 0,001 ° feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed B-axis: 1 - 10.800 °/min rapid traverse B-axis: 30,00 U/min size of pallet: 800 x 630 mm max. workpiece diameter: 800 mm workpiece height max.: 1.330 mm table load: 1,20 t toolpiece magazine: chain magazine: 180 Stück tool diameter: 80 mm tool diameter with 2 vacant positions: 160 mm tool length - max.: 450 mm weight of tools max.: 15,00 kg total power requirement: 57,00 kW weight of the machine ca.: 22,00 t dimensions of the machine ca.: 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik ...
Deckel Maho DMC63V BJ 2009 ( incl. new milling spindle + Y-spindle ) Heidenhain Control
x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: SINUMERIK 840D pl spindle turning speed - stepless: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 760 mm y-travel: 460 mm z-travel: 560 mm Control: Siemens Sinumerik 840D b-axis: NC-Schwenkfräskopf A-axis: NC-Rundachse milling-head swivable +/-: -120 / +30 Tool changer: 60 Cooling through the spindle: IKZ 40 bar spindle turning speed range: 12.000 U/min spindle motor: 28/19 kW tool taper: HSK-A 63 max. torque on the spindle: 121 pm total power requirement: ca. 60 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: - m Universal bar machining center - Siemens Sinumerik 840 D 3D path control - Powerline ShopMill - Controlled NC swivel milling head (B-axis) - NC rotary axis with integrated clamping system - NC bar loader - Slide/conveyor belt for parts disposal - Coolant tank 600 ltr. with paper belt filter - IKZ 40 bar through spindle center - Rotating viewing window - Tool breakage control - Chip conveyor - Tool magazine - Chain magazine with 60 magazine s ...
x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm Control: SIN840D pl table-size: 950 x 650 mm workpiece weight max.: 1.000 kg feed X/Y/Z/-axis: 1 - 90.000 mm/min rapid traverse X/Y/Z: 90,00 m/min spindle turning speed - stepless: 1 - 18.000 U/min power capacity at 100 % load: 25,00 kW power capacity at 40 % load: 35,00 KW tool taper: HSK-A63 tool magazin:: 30 tool diameter: 80 mm tool diameter with 2 vacant positions: 140 mm tool length - max.: 300 mm weight of tools max.: 10,00 kg total power requirement: 58,00 kW weight of the machine ca.: 11,00 t dimensions of the machine ca.: 7,00 x 4,00 x H3,50 m Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA pallet system MTS500, tool breakage control, coolant-unit, coolant through the spindle (23 l/min at 40 bar), chip conveyor, electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTe ...
A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.
Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible.
Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.
x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm distance spindle nose and table: 120 - 630 mm control: iTNC 530 ERGOLine Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 130 / 87 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 23 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probin ...
The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Rotary table 360, tilting head +120 /-30 32 slots, chip conveyor Rpm=12k
x-travel: 980 mm y-travel: 630 mm z-travel: 630 mm Control: iTNC 530 total power requirement: 10 / 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 442,5 m Equipment: Electronic handwheel Operating mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-position tool magazine Rigid table 1250 x 700 mm Chip conveyor Coolant device Special price for collection ex works / EXW foundation EXW D-63110 Rodgau List price ex warehouse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots
Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rate ...
Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...
x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm table surface area: 1000 x 543 mm spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min table load: max. 350 kg control: HEIDENHAIN MillPlus milling-head swivable +/-: 90 ° total power requirement: 26 kVA weight of the machine ca.: 4,2 t dimensions of machine L x W x H: 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 10.000 Kg, Accessories: Chip conveyor
DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system
DECKEL MAHO DMU 60 monoBLOCK 5-axis machining center GENERAL Project No.: 905799 Quantity: 1 pcs. Manufacturer: DECKEL MAHO Type: DMU 60 monoBLOCK Control: Heidenhain Millplus iT Year of Make: 2008 Condition: Used machine Approx (hrs): 38596 Spindle in approx. (hrs): 200 Program run approx. (hrs.): 16181 DESCRIPTION MILL 5 axes Travel in X 730 mm Travel in Y 560 mm Travel in Z 560 mm Max. rapid traverse speed in X/Y/Z 30/30/30 m/min Tool holder HSK 63 Max. speed milling spindle 18000 1/min Milling head NC-controlled swivel -120/+30 degrees Chain tool magazine 60 stations Machine table 1000x600 mm Rotary table NC-controlled Diameter of rotary table 600 mm OTHER EQUIPMENT IR Workpiece Probes Splash protection cladding with partially clad work area Rotating viewing window Lighting in the work area Preparation for central oil/emulsion mist ...
reus: 8000 min-1 U/min Weight: 5500 kg Year: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mm travel -x axis: 1035 mm travel -y axis: 560 mm travel -z axis: 510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double Pallet Control Unit: Siemens 840D Travels :X: 560 mmY: 510 mmZ: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor, Tool measurement Unit,High pressure coolant unit Can be inspected under power
Machining center Deckel Maho DMU200P - Very good condition - Available Immediately - Worldwide Export Year of Make: 2003 Condition very good Stock number 0732 Control Heidenhain iTNC530 Clamping area 1,700 mm x 1,400 mm Spindle speed 12,000 rpm Spindle holder SK50 Tool magazine 60 places Internal coolant supply (IKZ) and chip removal package 40 bar Conveyor. Probe Heidenhain TS642 electr. Handwheel Heidenhain Operating mode 4 High-speed attachment spindle 42,000 rpm Tool Measurement Blum Laser
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: iTNC 530 Heidenhain Main spindle:: power capacity - main spindel: 13 / 9 kW turning speed range - main spindle: 20 - 10.000 min/-1 Torque: 83 / 57 Nm tool taper: SK 40 tension force: 10 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min Feed force: 5 kN input unit: 0,01 mm rapid traverse: 30 m/min total power requirement: 20 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Coolantsystem: high pressur ...
Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system
This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information.
A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.
This 4-axis DECKEL MAHO DMC 50 H horizontal machining centre was manufactured in 2001. Ideal for precision machining, it offers robust construction and reliable performance. Contact us for more information about this machine.
maximum number of results exceeded
please refine your search
