127,583 used machines on RESALE, but how to find them? Machine Search
x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...
x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...
CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...
Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator
x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: 840 D Siemens Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 ° swivle time: 1,2 s pallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mm max. workpiece weight: 1.500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 180 pos. tool taper: HSK-A63 total power requirement: 78 kVA weight of the machine ca.: 27,0 t dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rota ...
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: SLIMline Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 13 / 9 kW Torque: 83 / 57 Nm tool taper: SK 40 work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min rapid traverse: 30 m/min total power requirement: 17 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: 12 bar Renishaw: exhaust fan: ...
Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible.
x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: SIEMENS 840 C total power requirement: 12 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm Control: CNC total power requirement: 13 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...
Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor
x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm Control: SIEMENS 810D powerline table dimensions: 850 x 630 mm table load capacity: 600 KG tool magacine with: 30 Plätzen spindle turning speed range: 12.000 U/min total power requirement: 42 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor coolant / belt filter system Interlit SPB 3/600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 800 mm z-travel: 750 mm control: SIN 840D sl Siemens B - axis: 360 x 0,001 ° A - axis: -200 -- +25 x 0,001 ° spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 100 % load: 28,00 kW power capacity at 40 % load: 34,00 KW max. torque at 40% / 100% load: 110 / 84 Nm tool taper: HSK 63 feed X/Y/Z/-axis: 1 - 100.000 mm/min rapid traverse X/Y/Z: 100,00 m/min feed capacity X/Y/Z: 9 / 6 / 9 kN feed B-axis: 1 - 14.400 °/min feed A-axis: 1 - 7.200 °/min size of pallet: 2x 500 x 500 mm workpiece weight max.: 400 kg max. workpiece diameter: 800 mm workpiece height max.: 800 mm tool magacine with: 63 diameter of tools max.: 280 mm tool length - max.: 550 mm weight of tools max.: 15,00 kg total power requirement: 65,00 kW weight of the machine ca.: 14,00 t dimensions of the machine ca.: 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERI ...
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 40 % load: 28,00 kW power capacity at 100 % load: 19,00 kW max. torque on the spindle: 121 / 82 Nm spindle taper: HSK-A63 B-axis: -10 - +180 ° c-axis: 360 x 0,001 ° feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed B-axis: 1 - 10.800 °/min rapid traverse B-axis: 30,00 U/min size of pallet: 800 x 630 mm max. workpiece diameter: 800 mm workpiece height max.: 1.330 mm table load: 1,20 t toolpiece magazine: chain magazine: 180 Stück tool diameter: 80 mm tool diameter with 2 vacant positions: 160 mm tool length - max.: 450 mm weight of tools max.: 15,00 kg total power requirement: 57,00 kW weight of the machine ca.: 22,00 t dimensions of the machine ca.: 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik ...
Deckel Maho DMC63V BJ 2009 ( incl. new milling spindle + Y-spindle ) Heidenhain Control
x-travel: 760 mm y-travel: 460 mm z-travel: 560 mm Control: Siemens Sinumerik 840D b-axis: NC-Schwenkfräskopf A-axis: NC-Rundachse milling-head swivable +/-: -120 / +30 Tool changer: 60 Cooling through the spindle: IKZ 40 bar spindle turning speed range: 12.000 U/min spindle motor: 28/19 kW tool taper: HSK-A 63 max. torque on the spindle: 121 pm total power requirement: ca. 60 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: - m Universal bar machining center - Siemens Sinumerik 840 D 3D path control - Powerline ShopMill - Controlled NC swivel milling head (B-axis) - NC rotary axis with integrated clamping system - NC bar loader - Slide/conveyor belt for parts disposal - Coolant tank 600 ltr. with paper belt filter - IKZ 40 bar through spindle center - Rotating viewing window - Tool breakage control - Chip conveyor - Tool magazine - Chain magazine with 60 magazine s ...
x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...
A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.
x-travel: 500 mm y-travel: 420 mm z-travel: 500 mm spindle taper: SK 40 table surface area: 700 x 400 mm table load capacity: 800 kg control: Heidenhain TNC 426 rated capacity: 40 kVA voltage: 400 V weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm --> Special tool - max. Ø with free neighbouring spaces: 140 mm --> Max. tool length from spindle nose ...
Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible.
x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm Control: SIN840D pl table-size: 950 x 650 mm workpiece weight max.: 1.000 kg feed X/Y/Z/-axis: 1 - 90.000 mm/min rapid traverse X/Y/Z: 90,00 m/min spindle turning speed - stepless: 1 - 18.000 U/min power capacity at 100 % load: 25,00 kW power capacity at 40 % load: 35,00 KW tool taper: HSK-A63 tool magazin:: 30 tool diameter: 80 mm tool diameter with 2 vacant positions: 140 mm tool length - max.: 300 mm weight of tools max.: 10,00 kg total power requirement: 58,00 kW weight of the machine ca.: 11,00 t dimensions of the machine ca.: 7,00 x 4,00 x H3,50 m Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA pallet system MTS500, tool breakage control, coolant-unit, coolant through the spindle (23 l/min at 40 bar), chip conveyor, electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTe ...
x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm distance spindle nose and table: 120 - 630 mm control: iTNC 530 ERGOLine Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 130 / 87 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 23 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probin ...
Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...
Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 10.000 Kg, Accessories: Chip conveyor
DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system
reus: 8000 min-1 U/min Weight: 5500 kg Year: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mm travel -x axis: 1035 mm travel -y axis: 560 mm travel -z axis: 510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double Pallet Control Unit: Siemens 840D Travels :X: 560 mmY: 510 mmZ: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor, Tool measurement Unit,High pressure coolant unit Can be inspected under power
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: iTNC 530 Heidenhain Main spindle:: power capacity - main spindel: 13 / 9 kW turning speed range - main spindle: 20 - 10.000 min/-1 Torque: 83 / 57 Nm tool taper: SK 40 tension force: 10 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min Feed force: 5 kN input unit: 0,01 mm rapid traverse: 30 m/min total power requirement: 20 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Coolantsystem: high pressur ...
Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system
Key data: 635 mm, 510 mm, 460 mm
Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.
This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre including a Schuler automation. Contact us for more information.
This 4-axis DECKEL MAHO DMC 50 H horizontal machining centre was manufactured in 2001. Ideal for precision machining, it offers robust construction and reliable performance. Contact us for more information about this machine.
This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions.
This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information.
CNC controller: SIEMENS 840D solutionline Operate Axes X-axis travel mm: 630 Y-axis travel mm: 800 Z-axis travel mm: 850 Worktable Number of pallets: 12 Table dimensions mm: 500x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Tool system Tool holder: HSK-A63 Tool magazine slots: 303 Equipment Chip conveyor Rotating inspection windows Rinsing gun Blowing air through spindle center selectable via M-function High pressure pump Tool breakage probe Coolant gun MPC – Machine Protection Control Infrared probe CE Round pallet storage Cooling Cooling through the Spindle Center bar: 80 Tank capacity: 980 Machine running times Under power: 46048 Spindle Working: 29258
This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information.
This 5-axis DECKEL MAHO DMC 60 Hi Dyn was manufactured in 2002. It features a HEIDENHAIN MILLPLUS CNC, pallet dimensions of 630 x 500 mm, and a magazine capacity of 60 tools. The spindle taper is SK 40, and it includes internal coolant through the spindle at 40 bars. Consider the opportunity to buy this DECKEL MAHO DMC 60 Hi Dyn vertical machining centre. Contact us for more information.
This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information.
This 5-axis DMG DECKEL MAHO DMC 125U was manufactured in 2002. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 125U universal machining centre. Contact us for more information.
Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26 ...
This 3-axis DECKEL MAHO DMC 64 V Linear was manufactured in 2004. A vertical machining center featuring a Heidenhain touch probe, iTNC 530 control unit, and a chip conveyor. It offers rapid traverse up to 100 m/min and X, Y, Z travel of 640 x 600 x 500 mm. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMC 64 V Linear machine we have for sale. Contact us for more information.
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: Sinumerik 840 D SL Siemens Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 83 / 57 Nm tension force: 8 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - distance: 100 mm T-slot - width: 4x 14H12 / 1x 14H7 mm max. table load: 600 kg table height over floor: 720 mm distance spindle nose and table: 120 - 580 mm Tool-Presetter:: number of toolpositions: 30 pos. Max. mould width: 80 / (130) mm max. tool length: 250 mm max. tool weight: 6 kg max. total weight: 80 kg change-time tool to tool: 1,6 sec change-time chip to chip: 6,0 sec feeds:: rapid traverse: 30 m/min feed speeds: 1 - 20.000 mm/min Feed force: max. 5 kN total power requirement: 28 kVA weight of the machine ca.: 3,8 t dimensions of t ...
This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information.
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:1,035 mm Y-axis travel:560 mm Z-axis travel:510 mm X-axis rapid traverse:30 m/min Y-axis rapid traverse:30 m/min Z-axis rapid traverse:30 m Y-axis feed length:560 mm Z-axis feed length:510 mm X-axis feed:30 m/min Y-axis feed speed:30 m/min Z-axis feed speed:30 m/min Rated (apparent) power:17 kVA Torque:83 Nm Controller manufacturer: Sie 137 mm Overall width:3,355 mm Table width:560 mm Table length:1,200 mm Table load:1,000 kg Overall weight:4,250 kg Spindle speed (min.):20 rpm Maximum spindle speed:8 000 rpm Tool operation:20 Tool length:300 mm Tool diameter:80 mm Tool weight:6,000 g Equipment:documentation / manual, chip conveyor, infinitely adjustable speed
This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information.
This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine.
maximum number of results exceeded
please refine your search
