deckel maho dmu used for sale

Stahlblech lackiert Innenliegende Rohre: 200 mm lang Ø 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock

Description: Consisting of 3 horizontal spindles and a counterholder weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm

; NEW

; NEW

Control panel for MAHO Fraea machine 500W with Heidenhain control TNC 232; New

Keyboard for Maho machines Philips 432/9. Please note: Board and pot are not included in the offer; New

Replacement TFT monitor for MAHO machines with control of Philips CNC 432. Suitable for MAHO CNC 432/10 Philips control machines. Front panel aluminum black powder coated High quality anti-reflective glass Dimensions 400 x 308 mm front panel Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixel brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Operating temperature-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, contrast ratio, auto adjustment Install phase position, clock, language, reset Included accessories: power adapter, Achschlusskabel 15-pol. D-Sub 24 months warranty!

Description: Transport hitch for MAHO MH 600 E2 max. 3t Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 300 mm, weight approx.: 120 kg

x-travel: 600 mm y-travel: 500 mm z-travel: 400 mm control: 432 spindle taper ISO: 40 turning speeds: 20-6000 U/min Tool changer: 24 total power requirement: 35 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,6x3x2,925 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: DMG (Maho) Type: MAHO MH1000C Control: Heidenhain TNC 410 CA Technical details: - X-travel 1000 mm - Y-travel 560 mm - Z-travel 800 mm - Round table through - Table load 800kg - Speed 20 - 2000 1/min - Rapid traverse 6 m/min Equipment: -Roundtable - Extendable quill, - Swivel head - Electronic handwheel -Foot switch - Coolant device -Operating instructions -Hydraulic rotation of the head for horizontal and vertical milling, 4-AXIS rotary table ! Machine is energized, viewing possible.

This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 3 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions.

Article number: 27-04-007 Manufacturer: Mikron Table Very good general condition suitable for: Maho MH 800 & MH 1000 Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 900x600x500mm Weight: approx. 300kg Table clamping surface: approx. 900x550mm T-slots clamping surface: Quantity: 6 pieces Size: 18mm Distance between T-slots: approx. 3x90mm Other accessories on request Price and other technical data on request

Key data: 500 mm, 400 mm, 400 mm

1 universal milling machine Deckel-Maho DMU 50 T built in 2003 Training machine only 300 hours as good as new Control Heidenhain Mill-Plus IT Spindle speed 20-9000 rpm SK 40 Travel X/Y/Z 500 mm x 400 mm x 400 mm 16-fold tool changer Manual swivel rotary table with display in the control C&B axis electr. Handwheel, Infarot Measuring Device

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

5 Axis Universal Machining Center with Nikken Rotary Tilt Sub-Device and Erowa Pallet system Manufacturer DMG Model DMU 100T Built in 2003 Control MillPlus IT Travel X / Y / Z 1080 x 710 x 710 mm Nikken rotary tipping table 32-fold tool changer / SK 40 Erowa Robot Easy Automation Integration with 12 stations and 31 units Erowa clamping systems

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

Control: DECKEL GRUNDIG MILL PLUS Operating hours: 11799 Technical data Table length: 1100 mm Table width: 650 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 650 mm Vertical travel (z axis): 550 mm Milling head divisions (B): 90 ° Tool changer: with double gripper Number of tools: 25 Tool diameter: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 315 mm Spindle nose: ISO: 40 Spindle speeds: up to: 6300 rpm Vertical spindle speeds: Feed range: 1-15000 mm/min Rapid traverse:: 15 m/min Spindle motor: 16.2 kW Total power required: 29 kW Machine´s weight about: 5500 kg Overall dimensions machine: Length: 3100 mm Width: 2300 mm Height: 2500 mm Various accessories: Coolant system Lamp

Description Vertical processing center from DMG suitable for tools, fixture construction, training as well as mould making Travel: 500x400x400mm Speed: 50-9000 rpm Technical data Control CNC Heidenhain 426 Table 700 x 500 mm Longitudinal path (X,Y,Z axis) 500x400x400mm Tool changer 16 Tool holder: SK 40 Vertical spindle speeds: 50x9000rpm Feeds 2-7500mm/min Connection 50 Hz 3x 380V Spindle motor 7.5KW Machine weight approx. 3500kg Dimensions 2400x2200x3000mm

Description CNC tool milling machine from DMG suitable for tooling, fixture construction, training as well as mold making Travel: 350x240x340mm Speed:20-6300rpm Technical data Year built / YOM 1999 Spindle speeds 20-6300rpm Steuerung / Control Siemens 810 D Shopmill Feeds 2-5000mm/min Table / Table 400x280mm Engine / Motor 5.5Kw Longitudinal / Travel (X,Y,Z) 350x240x340mm Machine Weight /Weight ca 1600kg Tool holder / Taper SK 40 Dimensions / Dimension 2000x2000x2000mm

x-travel: 1080 mm y-travel: 710 mm z-travel: 710 mm Control: Heidenhain type: iTNC 530 turning speeds: 12000 U/min Tool bore: ISO 40 Tool changer: 32 table surface area: 1500x800 mm Table load: 2000 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

X : 750 mm Y : 600 mm Z : 520 mm 12000 rpm Control unit : Heidenhain Renishow tool and part measuring Coolant through spindle Axis measurement scales Number of spindle hours : 9400 Machine is in excellent condition

Vertical machining center DMU 60 :::TECHNICAL SPECIFICATIONS::: CNC Model: Heidenhain CNC version: iTNC 530 Tool connection: HSK 63 Spindle power: 12Kw Number of Spindle Revolutions: 12000 Number of tools: 24 ( 12 x 2 ) X Axis Travel: 630mm Y Axis Travel: 560mm Z Axis Travel: 560mm Rapid linear axis feeds X Y Z: 20m/min Table dimensions: 1000 x 600mm Table capacity: 500Kg Guides: roller High refrigerant pressure: yes Chip evacuator: carpet operated :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 2700mm Height: 2210mm Weight: 6500Kg

Tool changerType of gripperDouble gripper Tool changer planevertical Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Floor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot wi ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool diameter with occupied adjacent pockets80 mmMax. tool length315 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12600 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 1 ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerType of gripperDouble gripper Tool changer planevertical Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mmDirect mea ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmDie and Mold Package linear incl. B-/C-TorqueDie and Mold Package linear incl. B-/C-Torque Dynamic package V-type Eagle timing belt for Z axis Torque table B-/C-axis including ATC AVD - Heidenhain or MVC - Heidenhain (starting NC 340590 11) APC and Top Speed - Siemens High End cooling unit for machiSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min- ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1.500 x 1.250 mm. Max weight allowed on table 4.000 kg. Table turning range (C Axis) 0.001 º (Continuo) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Horizontal / Vertical Auto Indexing Head (A Axis) 0,001 º (Continuo) Rapid Traverse 60.000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18.000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precisi ...

This DMG DMU 50 T Vertical Machining center was manufactured in the year 1997 in Germany. It is equipped with a Heidenhain MillPlus control unit. The machine has a spindle speed of 9000 rpm.

This DMG DMU 50 evo linear Vertical Machining center was made in 2010 in Germany and has 30651 production hours. It is equipped with a Heidenhain 530 control unit and has 5 axis.

Dairy Machinery UK offers the new Range of Electro Mechanical Ice cream continuous freezers / Fruit feeders/ Ripple Pumps/ Mix Plants . Contact Us for More information.

Year of construction: 2006 Control Heidenhain iTNC 530 Speed [rpm] 18000 Travel X/Y/Z [mm] 1150/710/710 Tool Aufn. HSK63 Spindle: Motor spindle technology Speed 18,000 rpm Power: 28 kW Torque 121 Nm Tool holder HSK-A63 NC swivel head: B-axis 0.001° Swivel range -120°/+30° NC rotary table: C-axis 0.001° Clamping surface ø800 mm General: Tool magazine 2x 16 stations Rapid traverse in X/Y/Z 30 m/min Rigid table clamping surface 1,500 x 795 mm Table load (max.) 800 kg Equipment/accessories: Displacement measuring system directly in X/Y/Z (glass scales) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure, 40 bar Workpiece Measurement Preparation Infrared Probe, m&h Tool breakage control Brankamp Oil mist extraction Electrostatic separator Set-up operation mode 4 Other accessories: various tool holders, ...

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm Tool changer: 30 Feed: 20-15000 mm/min Rapid movement: 40000 mm/min spindle taper: HSK 63 Cooling through the spindle: 17 bar spindle turning speed range: 12000 U/min rotary table dia.: 800 mm : CNC milling-head swivable +/-: CNC Control: Heidenhain total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2800 mm, 3400 mm, 1600 mm

5-axis Machining Center Machine MAKE: DMG MORI SEIKI MODEL: DMU 340P YEAR: 2007 SPECIFICATIONS: CNC Control: HEIDENHAIN X axis: 2,800 mm Y axis: 3,400 mm Z axis: 1,600 mm Max. working area: 2,500 mm x 3,500 mm Rotary table: 2,600 x 2,200 mm Rotary table range of rotation: 360 degree Milling head: -30~180 degree Max. loading capacity: 16,000 kg Main spindle motor output : 44kw 1,550Nm/32kw 1,000Nm spindle speed: 12,000 rpm Tool type: SK 50 Number of tools: 120 EA

Key data: 750 mm, 600 mm, 520 mm

5-Axis Vertical Machining Center DMG DMU 70 eVo linear NEW DESIGN Year of construction 2010 Heidenhain MillPlus IT CNC 2-axis NC swivel rotary table : Axis of rotation: C-axis 360° x 0.001° Swivel axis: B-axis 102° x 0.001° Table size: Ø 700 x 500 mm Table load: max. 350 kg Longitudinal travel: X 750 mm Transverse travel: Y 600 mm Vertical travel: Z 520 mm Feeds up to: X 80,000 mm/min. Y/Z 50,000 mm/min. Rapid traverses up to: X 80,000 mm/min. Y/Z 50,000 mm/min. B/C 40 rpm. Spindle: Spindle drive power: 35/25 kW Spindle speeds: 20 - 18,000 rpm. Tool magazine positions: 120-fold Tool holder: HSK-A63 Tool diameter with/without adjacent tools: 80/130 mm Tool length: max. 300 mm Tool weight: max. 6 kg Machine weight: approx. 8,500 kg Machine height: L/W/H 6,000 x 5,200 x 2,900 mm Accessories: Full fairing. Production package. IKZ 40 bar, 2 ...

Key data: 500 mm, 450 mm, 400 mm

Vertical 5-axis machining center DMG DMU 50 eVo Linear Year of construction 2006 Heidenhain MillPlus IT 2-Axis NC Swivel Rotary Table: Table size: 500 x 380 mm Table load: max. 200 kg Travel: Longitudinal travel: X 500 mm Transverse travel: Y 450 mm Vertical travel: Z 400 mm Table rotation axis: C-axis 360° / 0.001° Table Swivel Axis: B Axis +90°/-18° ~ 0.001° Cutting feeds: X,Y,Z 20,000 mm/min. Rapid traverse X linear actuator: X 80,000 mm/min. Rapid traverses: Y, Z 50,000 mm/min. C/B 50 / 40 rpm. Spindle: Spindle drive power: 40%/100% 35/25 kW Spindle speeds: 20 - 18,000 rpm. Spindle torque: 40%/100% 130/87 Nm Tool magazine and automatic tool changer: Tool magazine positions: 120-fold Tool holder: HSK-A63 Tool diameter (all pockets occupied): max. 80 mm Tool diameter with free side slots: max. 130 mm Tool length: max. 300 mm Chip-to-chip time: 5  ...

DMG DMU 50 ECO Vertical Machining Center Year of manufacturing: 2011 Travels X = 500mm Y = 450mm Z = 400mm C Axis: Clamping surface of rotational axis (rotary axis) - 630 X 500 mm, T Slot distance/size - 63/14H7 mm, Centre bore - 30H6 mm, Rapid speed - 2160 per min, Range of rotation - 360 degrees, B Axis: Swivel range (Swivel axis) - 115 (-5/+110) Diameter Ø 630 x 500 mm Control system Siemens 810 D Spindle Power 13.9 Speed:8000rpm Taper SK 40 Number of stack positions: 12 Machine weight: 4010 kg T-slotted table Liquid cooled Equipment: Electronic wheel for manual operation Minimum rotation speed of vertical spindle: 20 1 / min Maximum rotation speed of the spindle length: 8000 1 / min

DMG Mori DMU 50 Ecoline 5 axis machining center Machine is in good working condition 10,000 RPM DirectDrive engine Control Unit HEIDENHAIN TNC620 32 Sets of Magazines Tool measuring probe . Chip conveyor . Tool measuring probe . It has automatic track reset feature. It has been serviced by DMG service. Since we know the history of the machine, the previous operations are as follows. -B axis Brake changed -Z axis Ball Screw changed -Y axis Slide + Car ball screw has changed. -Y axis ruler changed. We have all the service records

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-63A DIN 69893 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minDirect measuring systemDirect path measuring systemSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel ra ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataRapid traverse longitudinal/transverse/vertical30/30/30 m/minFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30

Key data: 500 mm, 400 mm, 400 mm

Control Heidenhain ITNC 530i, spindle speed up to 14,000 rpm Tool changer 30 times Tool Measurement, Workpiece Measurement, Chip Conveyors, Documentation Service and repair work have been carried out for about 10,000.00€ in the last 2 years.

YP: 2003/ overhauled: 2016 Control Heidenhain ... TNC 530 Clamping table surface ... 1500x1050mm Axis X ... 1250mm Axis Y ... 880mm Axis Z ... 800mm Spindle speed ... 20-8000 rpm. Controlled axes ... 3 cooling ... 40bar SK 40 Magazine slots ... 30 Max. workpiece weight ... 2500kg The machine is in good condition, possible to test under power..

Working area 1Longitudinal500 mmCross450 mmVertical400 mmGeneralUniversal milling machine, with compound Guideway construction New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataType of main driveAC Drive power (40% DC)20,3 kWDrive power (100% DC)14,5 kWSpeed range20 - 14000 rpmSpindle taperSK 40 DIN 69871 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMiscellaneousClamping SystemDIN 69872 Floor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table cen ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7400 Kg

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7400 Kg