deckel maho dmg used for sale

Deckel FP3 A Milling Machine Dialog 11 Year of construction 1990, Dialog 11 control, working range 400 x 400 x 450 mm, quill stroke 80 mm, spindle speeds 4000 min, tool holder SK 40, feed rate 2 - 6000 mm/min, working range 400 x 405 x 400 mm, angle table, weight approx. 2000 kg, dimensions without control panel 1700 x 2100 x 2000 mm. Accessories: Universal tilt and swivel table Electronic handwheel, Coolant equipment Manuals Very good technical condition. Unfortunately, the machine was poorly painted over. A viewing under power is possible by appointment. If you have any questions, please feel free to contact us by phone at any time! You can find information on this under Legal information of the seller. Thank you very much.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm spindle taper: ISO 40 spindle turning speed range: 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1200 mm/min creep feed: 4 mm/min control: Heidenhain TNC 113 total power requirement: 1,6/2 kW weight of the machine ca.: 570 kg dimensions of the machine ca.: 1,2 x 1 x 1,75 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 600 x 210 mm Taper: Opposite bearing for horizontal milling unit: Bellows with slats of aluminium: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software ...

with digital read-out: Activ make: HEIDENHAIN for axes: 3 x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm horizontal milling head:: tool taper: ISO 40 vertical head:: tool taper: ISO 40 vertical movement of the milling spindle: 90 mm spindle turning speed range: 50-2500 U/min number: 18 feed stepless: 6.3-630 mm/min rapid motion -longitudinal/cross/vertical: 1.3 m/min total power requirement: 3.7/4.4 kW dimensions of the machine ca.: 1.3x2.0x2.0 m weight of the machine ca.: 1.8 t fixed working table:surface area: 800x460 mm vice: jaw width: 125 mm collet chuck: 1 number of collets: 11 boring chuck: 1 milling arbors: 7 coolant: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Deckel Maho DMU 50 T Vertical Machining center was manufactured in the year 1998 in Germany. It is equipped with a DMG GILDEMEISTER MillPlus control unit and has 3+2 axis.

Key data: 1050 mm, 800 mm, 550 mm

Machine Details Stock-No. 1105-03912 Type of machine milling machining centers - vertical Make DMG Type DMC 105 V Linear Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free on truck Price Technical details travel -x axis 1050 mm Travel -y axis 800 mm Travel -Z AXIS 560 mm control Heidenhain ITNC 530 turning speed range - power take off spindle 18000 rpm Additional information 3 axis - DMG DMC 105 V Linear - Chip conveyor - -30-position pick-up changer with round magazine 18000 RPM HSK 63 BUTTON

x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm total power requirement: 56 kW weight of the machine ca.: 14300 kg dimensions of the machine ca.: 5500x300x3100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 1000 mm

Machine Details Stock-No. 1105-03917 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER Type CTX 500 Year of manufacture 1993 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex stock Technical details turning diameter 600 mm turning length 1000 mm control ELTROPILOT swing diameter 600 mm spindle turning speed range 16-3200 1/min 3-jaw-chuck diameter 250 mm swing diameter over face slide 420 mm turret (x-stations) 12 VDI 40 total power requirement 50 kVA main drive motor 27 kW tailstock quill taper MT 5 Spindle Bore 85 mm work piece power 9,2 kW Rapid Traverse 10/15 m/min Additional information 3 axis machine coolant tank, tailstock chipconveyor, C AXIS + 3 Live Tools with 3-jaw chuck RÖHM D 250mm, various toolholders

x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm total power requirement: 68 kW weight of the machine ca.: 10500 kg dimensions of the machine ca.: 4300x2400x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 390 mm, 1250 mm

Machine Details Stock-No. 1105-03915 Type of machine CNC Turning- and Milling Center Make DMG-GILDEMEISTER Type CTX beta 1250 TC Year of manufacture 2014 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time by arrangement Freight basis from location Technical details turning diameter 390 mm turning length 1250 mm control SIEMENS 840 Weight of the machine approx. 11 t Additional information

DECKEL Tool Milling Machine – Bed Milling Machine Type. FP 33 (no KLOPP; RECKERMANN) built approx. 1975 Condition: exceptionally good Table clamping surface: approx. 1200 x 640 mm Longitudinal travel: 1,000 mm Transverse travel: 400 mm Vertical travel: 600 mm Speed range: 31.5 – 1,600 rpm. Locker cone: SK 50 Spindle power: 5.5 kW Feed rates: 8 – 400 mm/min. Rapid traverses: 1600 mm/min. Approx. dimensions: 3,000 x 2,000 x 2,600 mm Weight: approx. 4,500 kg The machine is suitable for repair operation; Repair, toolmaking, Machining of large parts with heavy-duty machining Accessories: Digital; Electric hoist load capacity 500 kg, on swivel arm; coolant device; Central lubrication, adjusting shoes Price net plus VAT plus loading costs Pictured ALLMATIC hydraulic vices, jaw width ...

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

Key data: 500 mm, 420 mm, 380 mm

Machine Details Stock-No. 1105-03930 Type of machine Machining Center - Universal Make LID MAHO DMG Type DMU 50 ECOLINE 5-axis 3+2 Year of manufacture 2012 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details x-travel 500 mm y-travel 420 mm Z-Travel 380 mm control HEIDENHAIN TNC 620 tool adaptor SK 40 turning speeds 8000 1/min table surface area 500 X 380 MM mm Tool Change Unit 20 pos. total power requirement 40 KVA 63 A Additional information CONTROL HEIDENHAIN ITNC 620 NC round-swivelling table, coolant device, Cabin

Ref. -No.: 10144 Manufacturer: DECKEL Year of construction: 2001 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 11130000713 X-Travel: 880 mm Y-Travel: 630 mm Z-Travel: 630 mm Machine length: 3600 mm Machine width: 2700 mm Machine Height: 2500 mm Table Dimensions (Lengthxwidth): 1250 x 700 mm Table Load: 1000 kg Max. Workpiece Weight: 8 kg Tool Taper: SK 40 Tool Piece Magazine With: 32 Pcs./pcs. Spindle Speed: 18.000 RPM Rapid Traverse: 30 m / min Total connected load max.: 37 kVA Weight Of The Machine Ca.: 9 t Operating hours: 42.340 H Further information: Additional information: • Table: swivel milling head

Ref. -No.: 10164 Manufacturer: DECKEL MAHO Year of construction: 1986 Type of control: CNC Control: CNC 432 Storage location: Halberstadt Country of origin: Deutschland Total connected load: 40 kVA X-Travel: 800 mm Y-Travel: 450 mm Z-Travel: 500 mm Feed force (X, Y, Z): X 800, Y 24000, Z 8000 N Quill Stroke: 100 mm Speed work spindle: 20-4000 RPM Feeds X/Y/Z: 1-3000 m / min Rapid Traverse X/Y/Z: 8 m / min Tool Taper: ISO 40 Space requirements: 3680 x 3780 x 2720 LxWxH (mm) Further information: Additional information: - with controlled rotary table Ø800 (B axis) - simultaneously controlled axes: 3 - axes controlled one after the other: 4

The machine is in good technical condition, can be tested under power. 5 axes simultaneously Heidenhain Mill Plus Tool holder: SK 40 Tool changer: 24 places X/Y/Z travel 500x380x380mm Quick feed: 0 B ? C axis: 0 - 360 Maximum speed: 15000 rpm Table size: 500x380mm Table load capacity: 200 kg Power: 15kW. 500X380X380 mm Table clamping area: 500X380 mm.

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm control: Sinumerik 810 D Siemens Main spindle: turning speed range - main spindle: 20 - 8.000 U/min power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 work table:: table surface area: 800 x 500 mm max. table load: 500 kg Set-up hight: max. 240 mm number of T-slots: 5 T-slot - width: 14 H12 mm T-slot - distance: 100 mm distance spindle nose and table: 150 - 650 mm feeds: feed speeds: X, Y, Z: 30.000 mm/min rapid travel ( X / Y / Z ): 30 m/min Tool-Presetter:: Tool changer: 24 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 7 kg total power requirement: 30 kVA weight of the machine ca.: 4 t dimensions of the machine ca.: 4,0 x 3,5 x 2,7 m Documents: Coolantsystem: elektr. hand wheel: div. tool holder: Vice: 1x CNC-Machiningcenter Verti ...

Engraving milling machine DECKEL type G1L Pantograph, pantograph Masch. Item no.: 75021 Year of construction approx. 1970 Milling table 500 x 200 mm Stencil table 530 x 320 mm Spindle speed approx. 4000 - 15000 rpm. 8 levels Gear ratio 1:1 to 1:50 infinitely adjustable Tool holder 4 mm Collet Motor power 0.85 kW Mains connection 380 volts, 50 Hz. - pantograph - letters and sets of numbers - various burrs - mobile on fixed rollers - operating instructions - adjacent accessory cabinet L x W x H 600 x 380 x 800 mm Space requirements Engraving milling machine L x W x H 1000 x 700 x 1300 mm Weight engraving milling machine 270 kg Weight accessory cabinet 60 kg (with contents) good condition; used

Key data: 250 mm, 150 mm, 340 mm

- Well-maintained collector's item with lots of accessories and tools - Lid bumper head - Swivel angle table -Vice - Workspace lighting - Tool table Specification Travel: - X-axis: 250 mm - Y-axis: 150 mm - Z-axis: 340 mm Table: - Clamping surface: 600 x 260/200 mm - T-slots: 5 - T-slot width: 12 mm - Table rotation range: ± 30° - Table swivel range: ± 30° - Vise wingspan: 105 mm Spindle: - Spindle speed: 20 - 2000 rpm - Vertical speed range: 60 - 1200 rpm - Horizontal speed range: 95 - 1900 rpm - Speed levels: 12 - Feed range: 8.5 - 475 mm/min - Feed stages: 10 - Spindle mount: MK4 - Quill stroke vertical: 65 mm - Milling head swivel range: ± 90° Machine data: - Motor power: 1.4 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 9000 x 1700 x 1150 mm - Machine weight: approx. 800 kg

Key data: 600 mm, 400 mm, 425 mm

Inv. Num. : 6808 Type: DMP 60V linear Producer: Deckel Maho Created: 2004 Parameters: Control system: Siemens Sinumerik 840D Duty cycle: 93000 h Operating hours: 64000 h Work table length: 1050 mm Work table width: 660 mm Maximum table load (uniform): 300 kg Tool magazine capacity: 25 pieces Number of synchronized axes: 4 pieces Speed: 20-18,000 1/min X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 425 mm Cone: HSK A63 Maximum tool length: 250 mm Machine height: 2700 mm Machine length: 3300 mm Machine width: 2000 mm Machine weight: 7700 kg Equipment: Chip conveyor IKF 400/3120 Filter equipment Interlit SP8/300 Vacuum 4 axle FTW/type TG 160

Engraving machine DECKEL GK21 work table: 350 x 200 mm stencil table: 500 x 300 mm x travel: 150 mm y travel: 300 mm z-travel: 350 mm speed range: 750 to 9500 rpm motor: 0.37 kW 1390 rpm 220 / 380 V 3AC 50 Hz with extensive accessories ! used, checked! Dimensions: 1350 x 1180 x 1610 mm

Weight: approx 2 t. dimensios: 1 x 1 x 1,5m

x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm

X-travel: 2500mm, y-travel: 920mm, z-travel: 820mm, max. rotational speed: 18,000/min, spindle holder: SK40, number of tool places: 30, connected load: 96kVA, controls: Heidenhain iTNC 530m, weight: 25t, operating/spindle hours: 118,712/ 10,654h, with documentation, without tools, has been serviced regularly, an on-site inspection is possible.

X-travel: 560mm, y-travel: 560mm, z-travel: 510mm, pallet clamping surface: 400x400mm, tool cone: SK40, rotational speed: 18,000/min, controls: SIEMENS 840D, weight: 8.2t, without accessories, with documentation.

X-travel: 800mm, y-travel: 710mm, z-travel: 710mm, B-travel: 360°, controls: SIEMENS SINUMERIK 840D, operational hours counter: 17,225h, including accessories.

X-travel: 800mm, y-travel: 700mm, z-travel: 600mm, rotational speed: 12,000/min, max. tool diameter/ length: 80/ 350mm, max. tool weight: 10kg, max. load: 800kg, operational hours counter: 52,199h.

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm spindle taper: SK 40 table surface area: 800 x 500 mm table load capacity: 500 kg control: Siemens 810 IKZ spindle speed:: 6000 U/min total power requirement: 30 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4,10x2,40x2,7 m Without accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- X: 300 mm - Y: 150 mm - Z: 340 mm - Clamping surface: 600 x 210 mm - Speed range: 40 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 1.7 kW - Digital display: 3-axis DITRON Digital - Total power: 1.7 kW - Machine weight: 830 kg - Space requirements (W x D x H): 1.2 x 0.9 x 1.7 m - Condition: good Details good condition, ready for immediate use Accessories Counter holder, dividing head

Max. spindle rotational speed: 15,000/min, controls: Dialog 112, tool changer and cooling lubricant transfer tube are defective, including fourth axis.

Travel X/Y/Z: 630mm/560mm/560mm, tool holder: SK40, max. speed range: 12000rpm, table size X/Y: 1000mm/600mm, groove spacing: 63mm, number of grooves: 9/14H7, max. table load: 500kg, table weight: 400kg. Control: Heidenhain MillPlus (V41X), weight: 6500kg, weight of cooling lubricant system: 1000kg. Including chip conveyor, control panel and manual control panel, AC servo motor. Documentation available. On-site inspection is possible.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: ! We have almost all spare parts for Deckel S 11 machines in stock ! Machine and accessories overhaul year of construction 2023 with CE marking and 12 months warranty (domestic)! LID S 11 TOOL GRINDING MACHINE - UNIVERSAL 400 V, 50 Hz, with CEE plug and cable Color: 2 K new paint Stand RAL 7005 mouse gray Body and accessories RAL 7035 light gray Motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > New three-p ...

Key data: 500 mm, 420 mm, 380 mm

Universal milling machine Deckel-Maho DMU 50 Evo built in 2004 Travel X/Y/Z 500 mm x 420 mm x 380 mm Control Siemens 840 D Powerline with Shopp-Mill NC swivel table 500 mm x 380 mm HSK 63 spindle with 18,000 rpm (new spindle) and new guides 32-fold tool changer Electric. Handwheel Mode 4 Production Package IKZ 40 bar /900 l Oil and Emulsion Mist Separator Conveyor

Control: Heidenhain TNC 430M, connected load: 30kVA, operating hours: 27,879h, the machine is heavily used, X- and Y-axis need to be overhauled, the motor of the Z-axis is defective, an on-site inspection is possible.

Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places.

Key data: 600 mm, 650 mm, 550 mm

Control Mill-Plus Milling head / vertical, horizontal, HV Spindle SK 40 with 12 000 rpm NC Rotary Table Tool changer with 60 places Conveyor IKZ

X-travel: 560mm, y-travel: 500mm, z-travel: 390mm, table dimensions: 900x530mm, rotational speed: 4000/min, tool changer: SK 40, controls: DECKEL DIALOG 11, with documentation, the tool changer is defective and needs overhauling.

There are four DECKEL MAHO FP3 NC and two DECKEL MAHO FP4 NC available, one FP4 has a defective guide track.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T grooves: 3 -rotatable and swiveling -fits for Deckel Mikron WMW and other milling machines -Weight: 95 kg

Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible.

X-travel: 710mm, y-travel: 600mm, z-travel: 500mm, rapid traverse: 6000mm/min, max. rotational speed: 6300/min, tool holder: SK 40, table dimensions: 550x1000mm, NC rotary table diameter: 630mm, controls: Dialog 4.

Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices.

Cross table, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel: x 50 mm/y 65 mm -Weight: 60 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg

Graver grinder, grinder, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder, tool grinder -Manufacturer: precision mechanics Weilheim, lid tool grinding machine type SO/64-6550 -Motor power: 0.37 kW 2800 rpm -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Dimensions: 510/450/H1280 mm -Weight: 67kg

Max. rotational speed: 2000/min, with instruction manual.

Controls: DECKEL DIALOG 11.

Rapid traverse: 3000mm/min, connected load: 12.5kVA, length: 2300mm, width: 2500mm, weight: 1.83t, the display is defective and the z-axis needs overhauling.

Controls: Deckel Dialog 11.