129,267 used machines on RESALE, but how to find them? Machine Search
x-travel: 650 mm y-travel: 500 mm z-travel: 500 mm control: Siemens 840 D table surface area: 800 x 500 mm rapid traverse: 60 m/min table load: 1,5 t turning speed range: 0 - 18.000 U/min max. torque on the spindle: 130 Nm power capacity - milling spindle: 15 kW no. of tools in the magazine: 30 Stück tool taper: HSK 63 A | internal coolant system feed: 40 bar weight of the machine ca.: 10,5 t dimensions: 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mm y-travel: 500 mm z-travel: 500 mm control: Siemens 840 D table surface area: 800 x 500 mm rapid traverse: 60 m/min table load: 1,5 t turning speed range: 0 - 18.000 U/min max. torque on the spindle: 130 Nm power capacity - milling spindle: 15 kW no. of tools in the magazine: 30 Stück tool taper: HSK 63 A | weight of the machine ca.: 11 t dimensions: 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm distance spindle nose and table: 120 - 630 mm control: iTNC 530 ERGOLine Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 130 / 87 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 23 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probin ...
x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 DIN 69871 work table:: table surface area: 1.200 x 560 mm max. table load: 1.000 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change time: 1,6 sec change-time chip to chip: 7,0 sec feeds:: feed speeds: 20.000 mm/min rapid traverse: 30 m/min Feed force: 5 kN total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,0 x 3,0 x 2,8 m Chip conveyor: Automatic Tool Changer: 30 pos. Coolantsystem: DXF import function: elektr. hand wheel: Operation mode 4: direct travel-measuring-system: ...
x-travel: 800 mm y-travel: 300 mm z-travel: 350 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications Working range 250 × 700 mm Copying table size 430 × 600 mm Stroke / working area longitudinal (X) approx. 322 mm Stroke / working area transverse (Y) approx. 200 mm Spindle drive / power approx. 1.5 / 1.7 kW Spindle speed (spindle speed) approx. 80 – 20,000 rpm Copy scale ratio (enlargement / reduction) 1:1 to 1:4 Overall dimensions (approx.) 2,000 × 2,000 × 2,000 mm Weight approx. 1,650 kg
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: TNC 426M Heidenhain Main spindle:: turning speed range - main spindle: 20 - 9.000 min/-1 power capacity - main spindel: 9 / 13 kW max. Torque: 57 / 82 Nm tool taper: ISO 40 DIN 69871 swiveling-rotary-table:: table diameter: 700 x 500 mm swivellable: B: 105° (-10°/+95°) man. rotatable: 360° man. max. table load: 200 kg number of T-slots: 7 T-slot - distance: 63 mm T-slot - width: 14H7 mm center hole: 30H7 mm Tool-Presetter:: number of toolpositions: 16 pos. tool taper: ISO 40 DIN 69871 max. tool length: 290 mm max. tool weight: 6,0 kg max. total weight: 50 kg feeds:: feed speeds: max. 10.000 mm/min rapid traverse: 12 m/min input unit: 0,01 mm total power requirement: 17 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Documents: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swi ...
The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Rotary table 360, tilting head +120 /-30 32 slots, chip conveyor Rpm=12k
x-travel: 980 mm y-travel: 630 mm z-travel: 630 mm Control: iTNC 530 total power requirement: 10 / 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 442,5 m Equipment: Electronic handwheel Operating mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-position tool magazine Rigid table 1250 x 700 mm Chip conveyor Coolant device Special price for collection ex works / EXW foundation EXW D-63110 Rodgau List price ex warehouse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dia. of draw-in collets: 4 - 24 mm max. radius to grind: 12 mm grinding range: 4 - 24 mm grinding wheel-diameter: 100 mm total power requirement: 0,4 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1 x 0,6 x 0,4 m Function: ready for operation: Electric 380 Volt: Base with drawer: Diverse collets: Draw-off device: Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 450 mm y-travel: 400 mm z-travel: 480 mm control: MillPlus IT V600 Heidenhain Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 10 / 15 kW max. Torque: 130 Nm tool taper: SK 40 swivellable: B: -95 / +30 ° NC-Rotary table:: table surface area: Ø 450 mm T-slots: 7x 14 x 63 mm max. table load: 250 kg rotatable: C: 360 ° max. workpiecediameter: 380 mm max. workpiece height: 670 mm tool magazin:: number of toolpositions: 16 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 8,0 kg feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Feed force ( X / Y / Z ): 7 / 13 / 10 kN total power requirement: 27,6 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,1 x 3,0 x 3,0 m Documents: Chip conveyor: Coolantsystem: elek ...
Specifications: Manufacturer: Lid Type: FP1 active Control: Heidenhain Active TNC113 Year of Make: 1977 Colour: grey Travels: X 300, Y 160, Z 340 mm Spindle Speed: 40 – 2,000 rpm. Tool/movement Tool holder: SK40 (S20x2) Feed: infinitely adjustable Active feed: in X and Z axis Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: The machine is in very neat original condition. Original lidded cabinet with various mounts and dividing head
Deckel FP5A CNC milling machine with Dialog 11 control. The machine is mechanically in good condition Stands in a hall almost rust-free. Accessories: Angle table
Bouw-/werkverplaatsingen (veelgenoemde waarden): X-as (longitudinaal): ~200–300 mm Y-as (dwars): ~200–400 mm Z-as (verticaal / hoogte): ~127–450 mm Tafel / opspanvlak (veel voorkomende afmetingen): ca. 600 × 430 mm of opspanvlak 250 × 700 mm 1.3 kW nbsp; Speeds: 50-10 000 rpm Weight: 1300 kg
DECKEL FP 2 Tool Milling Machine Machine Details: Manufacturer: Lid Type: FP 2 Year of construction: approx. 1978 Condition: very good, technically tested and partially overhauled Availability: available on order The Deckel FP 2 is considered the reference among universal milling machines – robust, precise and reliable. Specifications: Travel: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds: 8–400 mm/min Rapid traverses: approx. 1.5 m/min Digital display: 3-axis SINO Dimensions (LxWxH): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Equipment & Accessories: Vertical & horizontal milling equipment Drill quill 3-axis digital display SINO Coolant Setup Work light C ...
Universal tool milling machine DECKEL FP 3 With 3 axes active digital display Heidenhain TNC 11 Year of Make: 1984 Travel: X 500 Y 300 Z 400 Speed range: 25 – 2500 rpm With the following accessories: Rigid angle table 850 mm x 400 mm clamping surface Swivel rotary table 0 450 mm with dividing discs Bumper Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Various milling mandrels SK 40 / S22 x 2 Chip tray Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions
The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots
x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: SIN 840 D Siemens B - axis: +/- 110 x 0,001 ° C-axis: 360 x 0,001 ° feed X/Y/Z-axis: 1 - 20.000 mm/min rapid traverse X/Y/Z: 40,00 m/min spindle turning speed - stepless: 20 - 8.000 U/min tool taper: SK40 power capacity at 100 % load: 13,50 kW power capacity at 25 % load: 23,50 kW max. torque at 10% load: 85,00 Nm max. torque at 25% load: 150,00 Nm table surface area: 2.920 x 740 mm number of T-slots: 7 T-slot - distance: 100 mm T-slots: 1x 18H7 / 6x 18H12 integrated rotary-table: 750 mm table load of rotary table max.: 500 kg tool magazin:: 60 tool diameter: 80,00 mm wotkpiece diameter with 2 vacant positions: 130 mm tool length - max.: 300 mm weight of tools max.: 6,00 kg total power requirement: 57 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: 10,50 x 6,60 x H2,70 m 5-axis simultaneous machining cent ...
x-travel: 1035 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain type: iTNC 530 table surface area: 1400x650 mm workpiece weight: 1000 kg Tool changer: . spindle taper ISO: SK40 Spindle capacity: 10 KW turning speeds: 8000 U/min total power requirement: 20 kVA weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 15425033554 Chip conveyor 2 hydraulic vises Operating hours: 53005 Spindle hours: 12233 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers ...
Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible.
Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rate ...
Key data: 1600 mm, 1250 mm, 100 mm
Control: HEIDENHAIN iTNC 530 Spindle: 18,000 rpm, HSK-A63 Rapid traverse: 60 m/min | Working feed: 20–15,000 mm/min Table size: 1,500 × 1,250 mm (L × Q) Workpiece weight: up to 4,000 kg Table speed: up to 10 rpm Tool Magazine: 60 Slots Machine weight: approx. 34 t
Key data: 800 mm, 700 mm, 600 mm
Year of manufacture approx. 2002 CNC control MillPlus Plate changer Yes (2-fold) Swivel table No Tool magazine 60 places IKZ/HD cooling Yes Chip Conveyor Yes
Key data: 1800 mm, 2000 mm, 1100 mm
Large 5-axis universal/gantry machining centre for heavy workpieces Technical key data (typical, depending on variants): Table/load capacity: NC rotary table approx. 1,700 × 1,400 mm, up to approx. 5,000 kg Head/table axes: Swivel milling head B 0–180°, C 360° (resolution up to 0.001°) Spindle: up to approx. 10,000 min⁻¹, HSK-A63 Tool magazine: usually ~60 places Control: often Heidenhain TNC 430 (built in 2003) Peripherals (common): IKZ/HD cooling, chip conveyor
Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...
Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 00.000 Kg, Accessories: Chip conveyor
x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm table surface area: 1000 x 543 mm spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min table load: max. 350 kg control: HEIDENHAIN MillPlus milling-head swivable +/-: 90 ° total power requirement: 26 kVA weight of the machine ca.: 4,2 t dimensions of machine L x W x H: 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With track control Heidenhain iTNC 530 Year of Make: 2007 Travel: X 750 Y 600 Z 520 Speed range: 0 – 18000 rpm infinitely variable (SK 40) With the following accessories: 2-axis NC swivel rotary table 700 mm x 500 mm clamping surface 2-fold pallet changer Vertical tool changer with 92 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Heidenhain TS 640 Tool measurement in the work area (BLUM Laser) Operating mode 3 + 4 IKZ 40 bar Rotoclear Conveyor Coolant Setup Swarf Spray Gun 4 Height Adjustable Machine Shoes Operating instructions
Milling machine Deckel FP4 NC BJ 1987 Specifications •Travel: o X-axis: 560 mm o Y-axis: 500 mm o Z-axis: 410 mm • Includes tool cabinet and various tools (see photo)
DECKEL MAHO DMU 60 monoBLOCK 5-axis machining center GENERAL Project No.: 905799 Quantity: 1 pcs. Manufacturer: DECKEL MAHO Type: DMU 60 monoBLOCK Control: Heidenhain Millplus iT Year of Make: 2008 Condition: Used machine Approx (hrs): 38596 Spindle in approx. (hrs): 200 Program run approx. (hrs.): 16181 DESCRIPTION MILL 5 axes Travel in X 730 mm Travel in Y 560 mm Travel in Z 560 mm Max. rapid traverse speed in X/Y/Z 30/30/30 m/min Tool holder HSK 63 Max. speed milling spindle 18000 1/min Milling head NC-controlled swivel -120/+30 degrees Chain tool magazine 60 stations Machine table 1000x600 mm Rotary table NC-controlled Diameter of rotary table 600 mm OTHER EQUIPMENT IR Workpiece Probes Splash protection cladding with partially clad work area Rotating viewing window Lighting in the work area Preparation for central oil/emulsion mist ...
Key data: 300 mm, 150 mm, 300 mm
Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG
Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.
Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes.
Specifications: Manufacturer: Lid Type: FP1 Control: Heidenhain Active TNC113 Year of Make: 2007 Colour: green Travels: X 300, Y 160, Z 340 mm Spindle Speed: 40 – 2,000 rpm. Tool/movement Tool holder: SK40 (S20x2) Feed: infinitely adjustable Active feed: in X and Z axis Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional
reus: 8000 min-1 U/min Weight: 5500 kg Year: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mm travel -x axis: 1035 mm travel -y axis: 560 mm travel -z axis: 510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain NC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 10 / 15 kW max. Torque: 130 / 87 Nm tool taper: HSK-A63 swivellable: NC: +30 / -120 ° work table:: table surface area: 1.000 x 600 mm T-slots: 9x 14 x H7 max. table load: 700 kg tool magazin:: number of toolpositions: 60 pos. tool taper: HSK-A63 total power requirement: 49,7 kVA weight of the machine ca.: ca. 11,0 t dimensions of the machine ca.: 4,5 x 4,5 x 3,5 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: turning milling head: elektr. hand wheel: Rotary screen: paper band filter: Spray gun: exhaust fan: indexing attachment: EA-733.20 Tailstock: CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - Swivel-Millinghead The data for this ad was c ...
Offered is a Deckel FP 4 AT CNC milling machine year 1990. Control: Dialog 11. Coolant system: 70l, tool holder: SK40, tool changer: 20-fold, travels X/Y/Z: 560mm/500mm/390mm, table size X/Y: 900mm/530mm, spindle speed: up to 4000rpm, rapid traverse: 4000mm/min. Machine weight: approx. 2890kg. Tool changer defective. Viewing is possible by arrangement.
Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible.
Double Pallet Control Unit: Siemens 840D Travels :X: 560 mmY: 510 mmZ: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor, Tool measurement Unit,High pressure coolant unit Can be inspected under power
Cover Protective Cover for FP3 CNC - Splash guard booth for Deckel FP3 milling machines - Distance fastening screws: 910 mm - Dimensions WxHxD: 1270 x 1300 x 950 mm - Weight: approx. 80 kg
x-travel: 500 mm y-travel: 200 mm z-travel: 400 mm table surface area: 700 x 300 mm tool taper: SK 40 - S20 feed: 8 - 400 mm/ min rapid traverse: in X und Z 1200 mm / min turning speeds: 40 - 2000 U/min total power requirement: 2,2 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machining center Deckel Maho DMU200P - Very good condition - Available Immediately - Worldwide Export Year of Make: 2003 Condition very good Stock number 0732 Control Heidenhain iTNC530 Clamping area 1,700 mm x 1,400 mm Spindle speed 12,000 rpm Spindle holder SK50 Tool magazine 60 places Internal coolant supply (IKZ) and chip removal package 40 bar Conveyor. Probe Heidenhain TS642 electr. Handwheel Heidenhain Operating mode 4 High-speed attachment spindle 42,000 rpm Tool Measurement Blum Laser
Key data: 500 mm, 400 , 400
Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!
Key data: 800 mm, 650 mm, 650 mm
Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm table surface area: 790 x 560 mm spindle taper: SK 40 spindle turning speed - stepless: 20 - 12.000 U/min spindle drive: 13 kW max. torque on the spindle: 83 Nm feeds x/y/z -stepless: bis 20.000 mm/min rapid traverse: 30 m/min ATC: 20 Pos. tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 12 bar control: HEIDENHAIN, TNC 620 total power requirement: 17 kVA weight of the machine ca.: 3,9 t dimensions of machine L x W x H: 3,0 x 1,92 x 2,35 m Accessories: probe HEIDENHAIN, TS 460, electron. hand panel, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
