deckel 80 u used for sale

Used AVE - Technologies UNIBLOCCO MLK EFS/ESL 12/12/1 filling machine. New: 2006. AVE-Technologies EFS electronic filling systems are based on high-precision technology, guaranteeing high accuracy and high efficiency at all stages of operation. EFS filling machines are suitable for non-carbonated products such as water, fruit juices and nectars, milk, spirits, oils and food sauces in plastic and glass bottles. The set includes a labelling machine and a cap lift.

This SiteLight 2G package includes a complete set of 96 new, previously unused LED mesh modules , including packaging. The modules originate from a uniform SiteLight setup and are based on the 2G generation with LED mesh technology. They were originally designed for use as a media façade and construction site communication solution †for example when mounted on façades, scaffold tubes, or high-rise formwork in combination with protection screens such as Xbright. This makes them particularly suitable for projects that require large-scale LED surfaces on buildings or construction sites. 💡   The modules have not been individually tested prior to sale and are therefore offered as untested stock . This means that the modules may work, but this cannot be guaranteed . No statement is made regarding the actual functionality of individual panels. 🔍 Deliver ...

🎯 Perfect Upgrade for Renovators, Formwork Pros & MANTO Fans! Are you already using MANTO Laufkonsolen 90 ? Then this accessory set is the ideal addition for safer and more efficient work on your site.🛠   Why you should get it: Safe working: Guardrail attachment for 900 mm wide platforms Quick to set up: Can be mounted without special tools Perfect fit: Compatible with both vertical and horizontal MANTO panels Buy as a set & save: Ideal for retrofitting and clearance stock   📦 Only while supplies last! Order now and get started immediately.⚡ This accessory package enhances your existing MANTO system and makes every platform safer in no time †thanks to simple attachment with spring pins and additional bolts. All at a top price . 🛒 Don’t wait until your accessories are gone! Reserve your complete set now  ...

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,399.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 5399,00 ...

Framax Panel 1.35 m †Small but Powerful! ⚡🔩 Small but mighty! The Framax Panel 1.35 m combines stability, efficiency, and durability †perfect for any formwork task. 🚀 Your advantages at a glance: 🔹 Strong & durable: Galvanized and powder-coated steel frame stands up to the toughest demands. 🔹 Quick assembly: Smart locking system and continuous rib make setup fast and easy. 🏗️ 🔹 Extra robust: Xlife Framax panel, rear-fastened, for maximum strength. 🛠 🔹 Crane-friendly: Form large surfaces effortlessly †no extra effort required! 🎯 Small in size, big in impact! 💥 Get your Framax Panel 1.35 m now at Form-on ! 🛒 Price: from € 153,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned conditi ...

This SiteLight 2G package includes 96 used LED mesh modules , offered as a complete set including packaging. The modules originate from a connected SiteLight system and are based on the 2G generation designed for large-scale LED mesh applications. They were originally intended for use as a media façade and construction site communication solution †for example when mounted on façades, scaffolding structures or high-rise formwork in combination with protection screens such as Xbright. This makes them suitable for projects requiring extensive LED surfaces on buildings or temporary installations. 💡   The modules have not been individually inspected before sale and are therefore offered as untested used equipment . Some panels may be functional, but this cannot be guaranteed. No statement is made regarding the actual functionality of individual modules. 🔍 ...

Form-on multi function clamp - compatible with Doka Framax/Ringer Master  †strong, versatile, reliable 🚚   With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. ⭐   The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧   And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC   With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...

Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor

A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Ring Eye Stitching Heads

Only 5 hrs. Traded-in from customer who needs more power., Warranty is still applicable., Used Generator Set.; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320

Uhlmann C 130 horizontal cartoning machine ampoules / blister machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement guarantee mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Barcode reading of the folding box / package insert - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump / Venturi

Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...

A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/900mm/1550mm, weight: approx. 300kg. An on-site inspection is possible.

A round and long moulding machine Eberhardt is available. Moulding length: 1450mm, dough piece weight range: 150g-1500g, moulding capacity: approx. 650-1000pieces/h, machine weight: approx. 650kg. Including additional moulding bell (650g-1750g) and touch panel control. Documentation available. An on-site inspection is possible.

General SKU345S1073 MakeUSF Seitz Filtertechniek GmbH LocationBarneveld TypeSEITZ-VELAcart Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Number of candles5 Top connectionsDN25 Capacity34 Ltr. MaterialStainless steel Information No.542 Year of construction2000 Mounted on legscheck Floorspace0,4x0,3 m Total height1,5 m Extra SpecificationsInlet: DN50 Outlet: DN50 Max. working pressure: 10 bar Test pressure: 14 bar Max. temp: 85/134 °C Content: 34 Ltr. WITHOUT CANDLES Candle filtersUSF Seitz FiltertechniekFilters > Candle filtersBrand > USF Seitz Filtertechniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...

Universal 750 kg MANIPULATOR: yes Capacity: 750 kg Table dimentions: dia 1000 mm Voltage: 220 volt Weight: 2600 kg

A used wrapping machine Universum 50/70-3MM EB3 is currently for sale. These and many other machines are immediately available in our warehouse in Bielefeld. Universum 50/70-3MM EB3 Horn Winding Machine Winding Machine - Winding machine for wrapping croissants, croissants, etc. - Machine is completely rebuilt - all straps renewed - 400 volts 50 Hz - Year: 2008

solventless laminator Type: Rainbow S Manufacturer: Uteco Year: Expansion shafts, dia 76 mm - 5 pcs + 1 used as a mandrel for 152 mm (also air expansion type, like the shafts), 2 expansion shafts, dia 152 2-component pump 44 sleeevs for glue application Machine in good condition, under power Find more here - / Contact us at -

Key data: 630 mm, 200 mm, 4 kW

gebr. Combined planing machine ALDINGER Type: U63 Built in 1957 Motor power: 4kW Drive via V-belts 2-Knife Shaft Strip Knife Max. planing width: 630 mm Max. planing height: 200 mm Table height adjustment by handwheel 2 feed speeds: 8 / 16 m/min. Table lengths: Dressing length: 200 cm Length thicknesses:110 cm Link feed roller Articulated pressure beams Pull-out roller steel 2 tabletop sliding rollers Adjustment of the dressing fence conveniently by handwheel incl. Gebr. Planer Knife Suction device: 160 mm Weight: approx. 1,200 kg Transport dimensions: LxWxH: 212 x 112 x 110 cm

Extraction and filtration of aerosols Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65 C More items - new and used - can be found in our shop! International shipping costs on request!

UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.

Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm - Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 - Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 - Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 - Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 - Radius 60 / Radius 62 /  - Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 -    

Item condition: in working order Availability: immediately Table and sink: included Original price 2023: €28,000.00

Manufacturer: Cutting Trading Model: LC1 Automatic Unwinding Machine with Cross-Cutting Function Year of Manufacture: 2021 Technical Specifications: Maximum Roll Load Capacity: 800 kg Maximum Roll Diameter: 600 mm Maximum Feed Speed: 400 mm/s Maximum Cross-Cutting Speed: 400 mm/s Usable Width: 2200 mm Positioning Accuracy: 0.5 Find more here - / Contact us at -

x-travel: 1900 mm y-travel: 800 mm z-travel: 800 mm Control: control: 426 Heidenhain : dismantled: total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This fully automated line is designed for sorting, repositioning and palletizing mixed beverage crates and has an integrated ERP connection. - Pallet unloader Robogrip 4A-0795 - Modulpal PRO 2A pallet loader - Higher-level control - MultiCo S container transport - Pallet transport Pal CO S - Film wrapper Fabr.Haloila - 2xPallet labeller Fabr. Logopak - Network technology - Site Pilot Line Diagnostick with IT hardware - Electrical energy distributors - Technical documentation

General SKU350W923 LocationBarneveld MakeStephan TypeUMB40 Main Features MaterialStainless steel Volume40 Ltr. Motor5.5 KW Specified Features - Cutter MaterialStainless steel (Sandvik 1200SA) Cuttercheck Capacity40 l. Diameter500 mm Depth250 mm Knife diameter300 mm Number of knife blades2 Outlet100 mm Can be tiltedcheck Motor5,5 kW, 380 volt, 2870/1420 rpm Speed1420/2870 rpm Information No.25706A Year of construction1976 Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,70 m Total height1,10 m Extra SpecificationsThe vessel is made of stainless steel. : : The blades and lid are made of aluminum. : : CuttersStephanMills > CuttersBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

Engine Brand: VOLVO PENTA, Condition: USED, Nominal Rpm @ Nominal Power: 1500 Rpm, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 260 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/volvo-penta-tamd122a-used/ 42356, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.100 kg, Type number: TAMD122A

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: White , Engine Condition: Used , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 75 Kw, Rated Speed: 1800 Rpm, Generator KVA: 75 , Generator Hz: 60 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/john-deere-4045tf120-generator -60-kva-used/42277, , = More information =, , Type number: 4045TF120 GENERATOR 60 KVA

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 74.5 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 86.5 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 124 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/caterpillar-c4-4-s1m-generator -86kva-used/42264, , = More information =, , Type number: C4.4 S1M GENERATOR 86KVA

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Yellow , Working Hours: 3000 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 110 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/generators/caterpillar-3306-84z-generator -137kva-used/376, , = More information =, , Year of construction: 1010, Empty weight: 1.400 kg, Type number: 3306 84Z GENERARTOR 137KVA

Engine Brand: VOLVO PENTA, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: SAE 14 , Engine Condition: Used , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 192 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/volvo-td121-used/42360, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: TD121

Engine Brand: MAN, Condition: USED, Nominal Power @ Nominal Rpm: 235 Kw, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 155 mm, Engine Capacity: 9973 cc, Qty Cylinders: 5 Qty, Emission Certificate: EURO 1 , Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 6000 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 235 Kw, Rated Speed: 2300 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/man-d2865-lf06-used/42366, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.245 kg, Type number: D2865-LF06

Engine Brand: MAN, Condition: USED, Nominal Power @ Nominal Rpm: 162 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 125 mm, Stroke: 155 mm, Engine Capacity: 11413 cc, Qty Cylinders: 6 Qty, Emission Certificate: EURO 0 , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 7522 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 162 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/man-d2566-mte-used/42367, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.215 kg, Type number: D2566-MTE

Engine Brand: DAF, Condition: USED, Engine Aspiration Type: TURBO , Bore: 130 mm, Stroke: 146 mm, Engine Capacity: 11630 cc, Qty Cylinders: 6 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: goud , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , Starter Voltage: 24 Volt , Rated Power: 170 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/daf-dkt-1160-ag-used/42363 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.550 kg, Type number: DKT 1160 AG

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Red , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , Rated Power: 352 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-nta855-cpl1383-use d/42364, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.575 kg, Type number: NTA855 CPL1383

Panel size: 1350 x 3000 mm Pressing capacity: 90 ton  Plate Type: Hard Aluminum Plates  Travel+opening 400mm Cylinders 6 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface  All-round tension via spring system of the Myler protective film 

General SKU336X761 MakeBusch TypeCobra NX0650 A LZ1 Mach.No.CHM 121160... Year of construction2021 Pressure Working pressure0.0005 Bar Main Features MaterialMild steel/Stainless steel Volume650000 Ltr. Motor12.5 KW Specified Features - Vacuum pump MaterialMild steel, Stainless steel Pumpcheck Number of pumps:1 Capacity650 m3/h With motor12,5 kW, 400/690 volt, 2935 rpm Inletdia. 90 mm Outletdia. 90 mm Information Mounted on framecheck LocationBarneveld Floorspace1,70x0,95 m Total height0,85 m Weight700 kg CEcheck Extra SpecificationsSuction cap. 650 m3/h, water cooling, with filter : : : :Vacuum pumpsBuschPumps > Vacuum pumpsBrand > Busch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

Panel dimensions: 1350 x 3500 mm Pressing power: 120 ton Plate Type: Hard Aluminum Plates Travel+opening 400mm Cylinder 8 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface All-round tension via spring system of the Myler protective film

Refurbished Synchronous servo motor

High-Pressure Waterjet Trailer, wp 2,800 bar / 28 lpm YoM 2023 For sale is a very well maintained high-pressure waterjet trailer unit with extremely low operating hours. The machine is in excellent technical and visual condition and ready for immediate use. Powered by a Volvo diesel engine (160 kW), the unit delivers 2,800 bar at 28 lpm, making it ideal for demanding industrial and waterjet cleaning applications. With only approx. 185 operating hours, the unit is close to new. The trailer comes including accessories and is fully operational – no additional investment required. Inspection and test run possible.

A marking machine for folding cartons including an inkjet printer is available. 1) Off-line feeding and transport system KBA König & Bauer udaFormaxx, min. product dimensions X/Y: 30mm/60mm, max. product dimensions X/Y: 450mm/500mm, min. product grammage: 80g/m², max. product thickness: 8mm, max. transport speed: 90m/min, max. throughput capacity: approx. 250pieces/min. Machine dimensions X/Y/Z: approx. 1300mm/700mm/400mm, weight: approx. 150kg. 2) Continuous inkjet printer KBA alphaJET mondo, print lines: 5, vertical resolution: 32P, character height range: 2mm-15mm, max. printing speed: 780m/min, nozzle diameter: 62µm, machine dimensions X/Y/Z: approx. 500mm/350mm/300mm, weight: approx. 20kg. Including base frame. Documentation available. On-site inspection is possible.

Circular shears from Universal - Grooves - Scoring - Cutting Working width: 2,600 mm including automatic destacker (width: 2,500 mm)

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...

1. Machine manufacturer: UNITECH 2. Machine Type: CFS 2 3. Year of construction: 2001 4. Condition: used 5. Control type: Heidenhain TNC 410N 6. Design (vertical / horizontal / portal / 5-axis): Travelling column 3 - axle 7. Travel (X / Y / Z) in mm: 1500 x 300 x 315 8. Table size: 1800 x 350 9. Spindle power and speed: 6000 10. Tool holder: SK40 11. Equipment: Internal cooling 12. Accessories: Chip conveyor

General SKULX014 LocationBarneveld CEcheck MakeStolz TypeTURBO SIFTER BCMT Ø1250 Main Features MaterialMild steel Motor45 KW Length1900 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesø 1250 x 1900 mm Screw sizesExtracting screws under each turbosifter: ø 550 x 3000 mm Inlet350 x 350 mm With inspection hatchcheck MotorBeater motor: 45 kW: Sieve rotation gear-motor: 1,5 kW SpeedBeater rotation speed: 240 rpm: Sieve rotation speed: 6.3 rpm With sieve cagecheck Sieve perforation3 mm MaterialMild steel Information No.24-1597 Year of construction2024 (?) Floor space3,2 x 1,6 m Total height2,2 m Weight3700 kg Extra SpecificationsSieve area: 4.5 m² Air purged glands: :Not listed — however, machine uses compressed-air blowing system for sieve cleaning (1,670 NL/min at 6 bar).Rotating sievesStolzSieves > Rotating sievesBrand > Stolz What yo ...

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.

Stainless Steel Finish Ulma Etna Model HT280 Capable of 80 packs per minute Touchscreen for quick adjustments Can do clear or coloured film print reg In excellent condition Ideal for food and many other applications