deckel 80 u used for sale

Manufacturer: unbekant, Regalart: Kragarmregal, Regallänge mm: 4000, Nutztiefe mm: 600, Ständerabstand mm: 1000, Anzahl Ständer: 11, Lagerebenen: 4, 1stupright frame pieces Qty.: 4, 1.Transverse beam Qty.: 24, FREE TEXT: ca 128 Arme,

Manufacturer: Berges Umrichter , Type: ACM-D2 11,0kw, Serial number: I 95072401, mH/Hz: 0-50 Hz/380 Volt,

Manufacturer: Opti-line Umrichter, Type: V2500-0150TFW1,

Manufacturer: Schmidt, Type: UTSK, Year: 1995, Heating power in kW: 850, Fuel type: Späne, Flue gas fan: yes, Heating medium water: Warmwasser, Expansion vessel incl.: yes, Boiler system can be separated for transportation: ein, Year :1995

Manufacturer: SIKO, Type: Universal, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 220, Min.-max. workpiece height in mm: 50 - 350, Stacking pattern, single-row: 30, Stacking pattern, double-row: yes,

Manufacturer: Bürkle Bürste passend in Bürkle SLC , Bürkle: Reinigungsbürste,

Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007

Manufacturer: Siemens, Type: updaters Panel, Serial number: 5703069001, Systemconfiguration: Fert.724, Serial number: 5482557102,

Manufacturer: Perske, Year: ca 1993, Type: Umformer, KVA: 7,5, Year :ca 1993

Manufacturer: Perske, Year: ca 1993, Type: Umformer, aus Maschine: IMA Combima, KVA: 15, Year :ca 1993

Manufacturer: Homag, Type: CPU Umlade-RAM 512 I/O, Serial number: 2-083-01-5004, Systemconfiguration: PC Steuerung CPU , Year: 1992, Year :1992

Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979

Manufacturer: Unbekannt, Year: ca.1995, Lifting power kg: 1000, Length mm: 2000, Width mm: 1000, Lifting hight approx. mm: ca.1500, Total hight mm: 250, Safety strip: yes, built-on roller conveyor: yes, Year :ca.1995

Manufacturer: Teco Umrichter, Modell: N2-402-H3,

Manufacturer: Lenze, Type: Umrichter, Modell: 8200 Vector, Seriennummer: 0097, Produktionsnummer: 45382065, ID.Nummer: 00422974,

Triblock (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Eurostar Italy, type Uniblock MEC ISO DPS 12-12-1C, 12 rinser nozzles, 12 filling valves, 1 head crown cap, year of construction: 2005, with height adjustment, set up to currently 330 ml with 26 mm crown corks. 2,500 bottles / hour Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Eurostar Italy, Type: Uniblock MEC ISO DPS 12-12-1C, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2005, with hight adjustment, adjusted to bottle 330ml 0,33 l, 33cl mm with 26 mm crown cork. 2,500 BPH

Labelling machine Krones type: Universella 10 - 5 -4 to label body, neck and back labels bottle formats: 0,2 ltr., 0,7 ltr., 1,0 ltr.

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

completely rebuilt Fidia Combi Unica Machine suitable for the production of folders, sleeves, envelopes, etc. Maler hot glue system, 2 glue heads. optional 3-point gluing for boxes possible. price quoted is for standard machine with 2 glue heads

Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !

REF-2605 URSCHEL G DICING MACHINE Machine designed to cut vegetables and mushrooms into dice/cubes Manufacturer: URSCHEL Model: G Serial no.: 2450 Power: 2 HP Current cut size: 25x25x25 mm dice Overall dimensions: 1,500 x 1,200 x 1,150 mm (L x W x H)

Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar

CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16  ...

UNIVERSAL 2000

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

Thank you for your interest in our machines, which we can offer you as follows: Brand: Untroma Model : Klimat 090/12 Condensation Dryer - Drying Oven Year of construction : 2023 electr. Values : 12 KW 400 V 50 Hz 3Ph Dry product: up to 120kg/day Machine dimensions : approx. 1300 x 940 x 2050 (lxwxh in mm) Details : Filling capacity up to 150 kg depending on cutting thickness and tray height Drying at up to 45°C in about 24h Suitable for fruits, vegetables, pasta, meat, animal feed, technical products We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Thank you for your interest in our machines, which we can offer you as follows: Brand: Untroma Model : Klimat 090/12 Condensation Dryer - Drying Oven Year of construction : 2023 electr. Values : 12 KW 400 V 50 Hz 3Ph Dry product: up to 120kg/day Machine dimensions : approx. 1300 x 940 x 2050 (lxwxh in mm) Details : Filling capacity up to 150 kg depending on cutting thickness and tray height Drying at up to 45°C in about 24h Suitable for fruits, vegetables, pasta, meat, animal feed, technical products We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Circulation Miwe Stoves Please take data from the nameplate. Circulator removed immediately after the furnace was switched off cleaned with dry ice and technically checked no guarantee and warranty

Wide slot nozzle with 750 mm slot width Current gap approx. 0.25 mm Rectangular inlet 70 x 20 mm Ser.-No. 86.9149M

spindle diameter: 125 mm x-travel: 1.500 mm y-travel: 1.250 mm z-travel: 1.000 mm w-travel: 550 mm table surface area: 1.000 x 1.250 mm workpiece weight: 6.000 kg quill stroke: 550 mm tool taper: ISO 50 number of spindle speeds: 5-3.700 U/min. max. torque: 2012 Nm feed speeds: 1-6000 (x-Achse) mm/min feed speeds: 1-6000 (y-Achse) mm/min feed speeds: 1-6000 (z-Achse) mm/min rapid traverse x/y/z: 15/ 15/ 15 m/min dimensions of the machine ca.: 7,51 x 5,07 x 3,33 m : 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

incl. Teflon tapes, tools

Raystat / Krebser Swivel Bracket US-Uni with - Generator CPI CMP 200 DR - Tube RAD 14 Fa. Varian 0.6/1.2 - Mobile patient couch • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Used packaging machine made by Ulma, model: TF Optima 416. New: 2000.

2 trolleys (1x1x1,9m) Electric heating Air conditioning (cold) Technical data: Jumbo 1 smoke generator 56kW heating power 8kW cooling power

Used centrifugal blower from Reitz Umwelttechnik – 22 kW, 400 V, 50 Hz - Manufacturer: Reitz Umwelttechnik - Type: MSE 056-009530-00 - Power: 22 kW - Voltage: 400 V, 50 Hz - Volume flow: 95-100 m³/min - Pressure boost: 534-560 daPa - Speed: 2925-2940 rpm (max. 3100 rpm) - Suction temperature: up to 80 °C - Density: 1.205 kg/m³ - Shaft power: 11.5-16.4 kW - Condition: Used, functional. Includes spare engine. - Other blowers with 7.5 kW and 22 kW power available on request.

Product features Electrical insurance: 35 A Electric power: 15 + 2,2 + 0,1 kW Capacity: 300 crates/hour Size: 2700 x 800 x 1850 mm

Size: 520 mm Equipments: 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit 1x 1.ST Nr. 1 gate fold 1x 1.ST Nr. 2 gate fold 1x 1.ST Nr. 3 gate fold 1x 1.ST Nr. 4 gate fold

Key data: 3500 kN

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fa ...

WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton

table diameter: 160 mm chucking diameter: 160 mm positive location each: 15 ° weight: 31 kg dimensions of the machine ca.: 400 x 300 x 150 mm - Chuck with 15° indexing - Counter jaws - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand Metso Type Pump Model USHM 75 |180 w9Hc Chassis number 3013720100101,00 Year of construction 2011 Weight 0.5 ton Assets 11Kw Length mm 3200 Width mm 700 Height mm: 1100 Transport dimensions L x W x H 3.2 x .07 x 1.1 State machine Good Type of control Automatic Electrical connection 32A 5p Photos/film available: Yes

Size: 480 x 650 mm Equipments: 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

Size: 520 x 740 mm Equipments: 1 cam left and right 2 X Mounting Rings 2 Perforating arm 1 X Inking Unit 1 X Numbering Shaft

number of controlled axis: 6 workpiece weight: 120 kg throat: 3096 mm Control: Kuka total power requirement: - kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: - m Industrial robot with deburring unit - Robot control: Type: VKR C4 - ESTA small dust extractor OM-8 - Teach panel with connection cable (visible in the control cabinet) - External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) - Mounted additional attachment on robot flange, for grinding & deburring application - Base for stationary floor mounting - Control & power cables already assembled and integrated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Double mitre saw Pertici Type: UNIVER 502D2 Year of Make: 1998 Cutting of aluminium and PVC profiles Cutting length 360 – 6000 mm Cutting width max. 150 mm Cutting height max. 350 mm Saw blade diameter D 500 mm Saw blade revolutions 2800 rpm. Saw blade bore d 30 mm Saw blades swivel from 90° to 45° to 0° Motor powers: 2.2 + 2.2 kW Connected load 4.5 kW, 380 volts 50Hz Automatic feed and cutting process Saw automatically moves to the entered dimension and cuts automatically Control panel with digital display for cutting dimension was used for cutting aluminum square tubes in the Windows and conservatory construction Good working condition, exact cut Dimensions 7200 mm x 1200 mm x H 1700 mm Weight: 1980 kg

Grinding wheel diameter: 200 mm Clamping surface: 250 x 150 mm Diameter magnetic table: 120 mm Spindle speeds: 11 - 3,150 rpm Country of origin: Italy Machine LxWxH: 1,000 x 700 x 1,600 mm Machine weight: 250 kg

Key data: 425 mm, 145 mm, 120 mm

Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

Key data: 3600 mm, 1250 mm, 1600 mm

Brand: Kiheung Machine No: F668 Type KNC-U1000 CNC brand Heidenhain CNC type TNC 426 Year of construction 2002 Table length 4,100 mm Table width 1,050 mm Maximum table load 8,000 kg X 3,600 mm Y 1,250 mm Z 1,600 mm Holder BT50 Fast 10,000 m/min Speed 0 - 4,000 RPM Movable table Huron Milling Head CNC controlled milling head Conveyor Machine size (LxWxH) 11,000 x 5,000 x 3,800 mm Machine weight 28000 kg Magazine slots: 30 Spindle drive motor: 29 Kw Equipped with 4th axle. Table diameter: 630 mm Ø Load: 900 kg

Semi-automatic with rotary table • Max. Tool dimensions 300 x 500 mm • Max. Tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature for forming and sealing plate can be set differently • Two-hand operation • 1 tool set available • PLC Omron SYSMAC CPM1 • Touch panel • Mobile • Drive 400V/50Hz