deckel 80 u used for sale

I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - / Contact us at -

1994 Hacoba USK S1000 KSER Cone Warping machine Model: USK S1000 KSER YOC 11-1994 Condition: ready for use Working range up to 1800 mm Find more here - / Contact us at -

Food conveying and processing equipment List of equipment : 1. Dewatering shaker (fabricated in Q4 2020) 2. Weight conveyor belt (fabricated in Q4 2020) 3. Dejuicing shaker (fabricated in Q4 2020) 4. Diagonal shaker (fabricated in Q4 2020) 5. Dryer feeding shaker (fabricated in Q4 2020) 6. Incline belt elevator (fabricated in 2021) 1. DEWATERING SHAKER Dimensions: Length: 3.300 mm Width: 900 mm Features: Fully built in stainless steel. Tray fully built-in stainless-steel plate, composed by: 1 Dewatering screens of 1.000x600mm Juice collecting level and canalisation outside the machine. Vibration by means of fibber springs working at high frequency. Reaction mass in 5 mm stainless steel plate. Isolation by means of rubber silent blocks. Chassis in stainless steel structural profile for the required working height. Powered by-mass motor-vibrators (OLI trademark). Supp ...

Food conveying and processing equipment LIST OF EQUIPMENT: 1.Incline auger conveyor (fabricated in Q4 2020) 2.Fruit declumper/breaker (fabricated in Q4 2020) 3.Metal detector shaker (metal detector head not included) (fabricated in Q4 2020) 4.Redler elevator (fabricated in Q4 2020) 5.Grading shaker with an additional set of screens (fabricated in Q4 2020) 6.Horizontal belt conveyor (fabricated in Q4 2020) 7.Redler elevator (fabricated in Q4 2020) 1. INCLINE AUGER CONVEYOR Dimensions: Length: 2.300 mm Width: 1.500 mm Features: Fully built in stainless steel. Accumulation hopper of 1 m3 capacity made of textured stainless steel. Cleaning window at the lower part of the hopper. Evacuation screw of 300 mm diameter built in stainless steel. Open upper side of the screw for cleaning. Draining valve for cleaning. Upper screens to avoid big frozen blocs. Safety protections.  ...

2007 Union Bielefeld BF 400 U2 Bed milling machine. Mechanically it is completely fine, but there is a defect in the control system. no Machine is no longer used at all. All motors are running and mechanically everything is fine. I can´t say what exactly is wrong with the control system. Find more here - / Contact us at -

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

CNC milling machine Type: UBF 2500/10 Manufacturer: Kekeisen Year: 1997 Control: Heidenhain TNC 426 X: 2500 mm Y: 1200 mm Z: 1000 mm Spindle speed: 2000 rpm Spindle taper: SK 50 Table: 1200 x 1000 mm Max workpiece weight: 7000 kg Machine dimensions: length: 8300 mm width: 4000 mm height: 3250 mm weight: 17000 kg Two boxes with tools In good condition, under power. Find more here - / Contact us at -

KASTOwa C7 + Brio EB702 + Motoman YR-UP130 Upgrade your manufacturing capabilities with this comprehensive industrial automation package featuring the KASTOwa C7 bandsaw, Brio EB702 , and Motoman YR-UP130 industrial robot. This powerful combination is designed to enhance efficiency, precision, and productivity in your operations. Two complete sawing systems, consisting of bundle loader, saw body, buffer magazine, end processing, measuring table (length measurement, concentricity measurement, wall thickness measurement for pipes and marking unit, as well as a robot for loading containers onto the roller conveyor also included (see concept) A sawing system consisting of bundle loader and saw body including parts chute A chip conveyor from Mayfran Motoman Robot Details: Payload: 130 kg Mass: 700 kg KASTOwa C7 Machine Details: Weight: 980 kg Voltage: 400 V, 50 Hz, 3 Ph Power: 11  ...

UNION BIELEFELD WSF 41300 Find more here - / Contact us at -

Used 2-stage evaporation station UNIPEKTIN. Year of manufacturing: 1997. Equipped in aroma trap Parameters for apple juice: Input quantity: 4212 kg / h / 2840 kg / h Input dry pulp: 12 / 17.8% Temp. entrance: 15/45 degrees C. Water evaporation: 3500 kg / h Output quantity: 2,840 / 712 kg / h Temperature output: 50/55/25 degrees C. Initial dry mass: 17.8 / 71% Aroma (15x): 26.8 l / h Temp. aroma: 7 degrees C. Fresh water consumption: 5 m3 / hour Steam consumption: 1450 kg / h

Technician vice PANAVISE Jaw width 63 mm Wingspan approx. 60 mm Machine Base - Vacuum Plate swivel 90° Rotatable 360° Weight approx. 1 kg

grinding diameter: 630 mm grinding length: 600 mm centre height: 320 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wird überholt nach Kellenberger Messprotokoll und neu lackiert. Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerung ersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neue Elektrik. Siehe Beispielfotos. Maschine mit verstärktem Werkstückspindelstock zum fliegend Schleifen von schweren Werkstücken. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wittmann TP-PRIMUS C:90 Tempering Unit (2x) (2005)

Years: 1x 2012 1x 2011 1x 2010 1x 2006 2x 2008 (Is possible to buy 6 pieces)

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Eberhardt Universal Round and long mould Year of construction 2003 Siemens Simatic control system Height: 150cm Width: 80cm Depth: 100cm

Unix In-Store Baking Oven 3 pieces Type: XBC605 Stainless steel cladding Black front Digital control To be given only to dealers or export Price for all 3 stoves together: 4500.-€ net from stock.

Universal plan and boring head ISO - 50 recording

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

degree: 220 working heigth: . mm length: . mm The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for roll and strip goods Glue application station: cartridges + PU gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 3 mm (6mm) edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 15° Scraper unit for chamfers and radii Surface Scraper Unit - Finish Machine is CHECKED in TOP CONDITION from very well maintained craft business from stock Lieboch

Used stainless steel semi-automatic capcule filler Capsugel/Lonza Ultra III model CU-4204. Capacitu depending on product, operator and aplication between 4500-33000 capsules per hour. Powder feeder. Control Panel. Year of manufacturey 2019. Overall dimentions: width 1520 mm, depth 890 mm, height 1910 mm, weight 610 kg. Technical docuemtnation for the machine available.

Engine Brand: DETROIT DIESEL, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-12v92ta-812 3-7400-used/830, , = More information =, , Type: Engine, Empty weight: 2.350 kg, Type number: 12V92TA 8123-7400

Urban 4 m bed milling machine SK40 against bid. Slightly used, was only rarely used! In February 2023, the machine was set up and put into operation by the company Urban and has only very few operating hours. As an accessory, the machine has a pick-up station including angular head drive. Bids from the Dossenheim location.

Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 1,1 kW, 380-500 V condition: good (used) Conveying length in mm: 7500 Nominal / outside width in mm: 1000 Roll width in mm: 840 Roll division in mm: 175 Driven: YES sc ...

x-travel: 390/410 mm y-travel: 290/310 mm z-travel: 380/400 mm total power requirement: 4 kW weight of the machine ca.: 1,25 t dimensions of the machine ca.: 2100x2100x1700 m technical data please see attachment! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used pressure tank made by Urlinski, type: ZB 50 PF. New 2020. Working capacity: 50 liters Intended use: The ZB 50 PF-type mobile tank, vacuum-tight, designed for hygienic storage and transportation of pharmaceutical and cosmetic products of the second group of liquid classification (safe liquids). Technical data: -TYPE: ZB 50 PF -Working tank capacity: 50 liters, -Total tank capacity: 70 liters, -Grade of steel in contact with the product: 1.4404, -Tank inner diameter: 400 mm, -Fastener sealing material: VMQ, -Capacity: 56 kg, -Height: +/- 1300 mm, -Height with lid open: +/- 1420 mm, -Length: +/- 610 mm, -Length with open lid: +/- 940 mm, -Width: +/- 530 mm, -Drain spigot height from the ground: +/- 300 mm, -Surface area in contact with the product: 0.84 m2.

Used biscuit line for continuous round and square rolls BERTUETTI, Type: Universal Line - for round rolls, such as hamburgers and square ones - Universal dough divider and rounder SV250-G14 - Continuous rounding by G14 - Feed belt 1,900 mm - 6 rows - 1, 2, 3 or 6 rows can be used - Guillotine cutting system - Automatic sheet loader N20 for sheet sizes 60 x 100 cm - Lifting tipper - Dough intake - Sowing SST - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

Used biscuit line for round, square and hot dog buns BERTUETTI, type: 200 Universal - for round, square and long-rolled rolls, such as HotDogs - 4 rows - 1, 2 or 4 rows can be used - with settling on sheet metal - Dough intake - Sowing - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

Mint dough line for continuous production of hot dog buns BERTUETTI, type: Universal Line - Unloader BM0-1-C707 - Trays 60 x 80 cm or 60 x 40 cm - Head machine SV 200 CTF 6040 - Lifting tipper for crates 60 x 40 cm and height 32 cm - Dough feeder SAL2 - Long scooter F70 - Sheet metal deposition in BM0 loader - Computer control - Dimensions line: L 7,128 mm, W 1,258 mm - Lifter tipping height: 2,974 mm - Very good condition, ready for immediate use The plant is being sold for restructuring. Visits and test runs are possible by arrangement.

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy

Laminating machine up to 65 cm roll width, good condition

PART NUMBER 7474 Specifications: - max width of the workpiece 230mm - max height of the workpiece 160mm - number of spindles 5 1) Horizontal bottom 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) Vertical left 160mm 5.5kw 4) horizontal top 230mm, electrically adjustable up/down 7.5kW 5) Horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed insertion shafts, including 2 double shafts - 2 pulling lead shafts, rubber, single from below: - Pulling, metal, torsion toothed insertion shaft - Metal, smooth metal pulling outfeed shaft - pressure plate on the side - pneumatically adjustable rollers - length of the introductory table top 2020mm - central lubrication - Electric planing thickness adjustment from the control panel - smooth feed speed control 6-30m/ ...

Refer to code 1172 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

500 plastic pallet boxes Used goods, see pictures Manufacturer: Uni-Pak Colour grey/black Dimensions: 1200x800x765mm 500 pieces available. Negotiation price: € 30,- net from stock P10271 Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm table surface area: 1100 x 585 mm rotary table dia.: 500 mm spindle taper: SK 40 spindle turning speed range: 5 - 6300 U/min spindle power: 11 kW no. of tools in magazin: 2 x 22 control: HEIDENHAIN, TNC 426 total power requirement: 20 kW weight of the machine ca.: 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1250 mm z-travel: 1600 mm spindle taper ISO: 50 bore spindle stroke: 710 mm main drive motor: 11 kW turning speeds: 1600 U/min Feed: 4000 mm/min Control: Heidenhain type: TNC 135 T-slot - width: 22 mm T-slot - distance: 140 mm table surface area: 1250x1400 mm Table load: 2500 kg total power requirement: 23 kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2000 mm z-travel: 2330 mm spindle taper ISO: 50 bore spindle stroke: 1000 mm turning speeds: 900 U/min Feed: 2500 mm/min Control: Heidenhain type: TNC 131 T-slot - width: 28 mm table surface area: mm Table load: 8000 kg total power requirement: kW weight of the machine ca.: 37,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 1600 mm z-travel: 1250 mm Control: Heidenhain type: TNC 426 table surface area: 2000x1600 mm Table load: 12500 kg Rotary table: 360 ° spindle turning speed range: 12-3000 U/min Feed: 1-9999 mm/min Rapid movement: 10000 mm/min total power requirement: 80 KVA weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h -  ...

Machine designed to cut pepper and other vegetables into strips and dices Manufacturer: URSCHEL Model: J Power: 5 HP Current cut size: 10x10x10 mm dices Overall dimensions: 2,500 x 1,100 x 1,450 mm (L x W x H) Belt width: 240 mm

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mm grinding length: 600 mm centre height: 320 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine with heavy duty workhead. Machine will be partial overhauled before delivery. Machine will get a geometry protocoll according to the Kellenberger new machine guideline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wrapper Universum Kasper Model: HWM 30/3 Squirrel wrapping machine is mobile for all spears such as Kornspitz and pretzel sticks, etc. Universal Winding Machine for all doughs for wrapping Stainless steel Dough inlay approx. 20 to 150 g 300 mm belt width all belts and scrapers NEW DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled 3 months warranty Option: Feeding belt EB Service Package E-Box Maintenance contract Instruction & Commissioning Visit one of the largest exhibitions of cone wrapping machines!

Manufacturer: Unimac-Gherri Series: Tappatore Mod. Cap. 4-Plastic Year: 2010 Capacity: 10,000 b/hr Formats:current 850ml Specifications: - Voltage 400 V - Frequency 50/60 Hz - Nominal power: 4 kW

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

Technical specification, Will be added soon, Overband magnetic separator, Magnetic blocks are designed to effectively remove unwanted metals such as iron and steel prior to the granulation process. They attract and remove metal particles as the materials pass underneath, maintaining product purity and protecting machinery from ferrous residue. Mizars OMS series magnetic separators offer durability and high performance in continuous operation, providing a reliable solution for industry.