deckel 80 u used for sale

Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available

table diameter: 330 mm table load: 220 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 100 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 48 Kg dimensions of the machine ca.: 640 x 440 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round material: 30 x 1 mm square material: 30 x 30 x 1 mm : 16 mm : 30 x 10 mm speeds: 9 U/min total power requirement: 1,1 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Jaw height: 35 mm -Clamping range: 65 mm -Dimensions: 400/260/H135 mm -Weight: 30 kg

Control panel Pacmation made of Uhlmann C130 YOC 1996

Magnet coil, electromagnet, pull magnet -Ritz: type UIRK 290 -Connection: 0.72/3/- kV 50 Hz 1 VA -Price: per piece -Number: 3x available -Dimension: Ø 355 x 30 mm -Weight: 3.1 kg

Computer monitor, control unit, operating unit, keyboard, screen, control -Manufacturer: Heidenhain, Manual Plus Monitor from lathe Kern CD 480 -Type: 12.1 VGA Unit Rotating. ID No. 367 957-02 -Dimensions: 400/300/165 mm -Weight: 5.8 kg

Gas cylinder cart, gas cylinder cart, steel cylinder cart, gas cylinder stair cart, stair hand truck -Manufacturer: Fedor Ulisch, stair hand truck with a wide shovel -Pipe frame: stable design with locking lever -Dimensions: 670/530/H1215 mm -Weight: 30 kg

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...

Stock number U2387-1 Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with central discharge outlet. Tank is mounted on three stainless steel legs, on tension cells. On side walls there are welded four baffles. Mixing is provided by homogenizing agitator by IKA (DE) model Turrax UTC TMP 150 / 2KT, driven directly by 11 kW, 2915 rpm, 380/660 V, 50 hz. Length of the shaft 900 mm x diameter of mixing die 150 mm. Agitator is mounted on stainless steel supporting frame. Discharge from tank is provided by sinusoidal stainless steel contact parts pump by Masosine Process Pumps model SP 25, working on pressure up to 15 bar. Working rotation up to 600 rpm. Pump is driven by 2.2 kW, 1400 rpm, 220-380 V, 50 hz. Working rotation of drive up to 2 ...

Dear's Sale, used 2 diesel engine Ulstein Bergen BVM-12 Brgds Hakan KUSCU +905323642509

Dear's Sale, used engine MITSUBISHI UEC 45 piston, main bearing, conrod bearing, etc. Brgds Hakan KUSCU +905323642509

Dear's Sale, used 2 engine MITSUBISHI UEC 52 PISTON Brgds Hakan KUSCU +905323642509

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

Product number: 2414J Type: UNIMIX I V 3500 Serial number: 5000065442 Year of construction: 2007 Mixer: 3500 litre double paddle mixer Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 41kW Dimensions: 3650 x 2100 x 4300 mm With (N²) nitrogen injection. Mixer on weighing cells

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Used labeling machine P.E. LABELLERS model Universal M / S 6T / 540 / 2S-2E Power required: 3kW Required pressure (demand): 5 bar (15 l / min) Capacity: 80 pcs / min (jars - 1 format) The device allows labels to be applied to the front and back of the package. The device is equipped with one type of format. When using other formats, it is possible to cover jars of 0.3-0.9 liters. The device has a buffer sensor for jars that are fed into the labeller. A cold label gluing system is used.

Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

Angle grinder, cutoff grinder, angle polisher -Power: 500 W -Speed: 2000 rpm -Diameter: up to 120 mm -Price: per piece -Number: 2 pieces -Dimensions: 360/110/H200 mm -Weight: 3.2 kg/piece

Three-phase permanent magnet motor 3-phase permanent magnet motor used, normal condition used, average condition Please note: we got several new Bosch Rexroth servo drives in stock! We have a selection of new Bosch Rexroth servomotors in stock! Please contact us.

Key data: 1 , 95

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/95 Przekładnia: 15 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 58 mm -Clamping depth: max. 190 mm -Number: 1x vises available -Price: per piece -Dimensions: 520/280/H155 mm -Weight: 55 kg

Power supply, converter, converter, power supply unit, Smart-UPS -APC: Smart-UPS 1000 -Uninterruptible power supply -Connection: 220-240 V/50/60 Hz -Price: per piece -Number: 4 pieces -Dimensions: 435/170/H215 mm -Weight: 20 kg

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 4 Obroty r/min : 1410/25 Przekładnia: 56 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 47 mm -Clamping depth: max. 157 mm -Number: 1x vices available -Price: per piece -Dimensions: 460/226/H130 mm -Weight: 33 kg

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 3 Obroty r/min : 1410/79 Przekładnia: 18 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Fogg &Young C Frame Press 3400mm wide Upstroking 3x heating zones Eurotherm controllers

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/60 Przekładnia: 24 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 13mm - 50mm tube diameter - Cycle rate 10 - 15 tubes/min. Depending on product and operator Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/35 Przekładnia: 40 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Width 800 mm Glues cold PVA glue Details machine modified to topgluing machine

Used floor oven HEIN, Type: Universal -In bakery condition- - 6 herds á W 2.0 x D 1.8 m - Baking area per stove: 3.6 m - Baking area in total 22m² - incl. feeding device The ovens are in good bakery condition and are immediately ready for use. Delivery and assembly on request. Overhaul possible.

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Specifications Tower storage system for sheet metal Manufacturer: KASTO Type: UNITOWER B3.0 Year of construction: 2008 Number of magazines: 49 Pull-out trolley on rail

two-armed drill, rotary drill, magnetic drill, impact drill, two-hand drill -Taper: MK with drill chuck -Nominal consumption: 250 W -Connection: 220 volts -Max. Drill: Ø 15 mm -Dimensions: 420/420/H120 mm -Weight: 7.1 kg

Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Mouth size: Ø 160 mm -without: interchangeable jaws -Central bore: mm -Dimensions: 320/230/H220 mm -Weight: 30 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Support bracket Universal F 4,50m For concreting heights up to 4.00m The "Abstützbock Universal" is a simple and uncomplicated way to support formwork with attachments up to a maximum height of approx. 4.0 m. Features: ▪ Suitable for beam and frame formwork. ▪ Tensile forces are reliably transmitted by diagonal armatures. ▪ Adaptation to the different fresh concrete pressures Required is simple and economical – simply increase or decrease the distance between the load-bearing structure, frame. 17 pieces available EUR 721,00 per pcs.

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 350 mm -Width: 82 mm -Inside diameter: 220 mm -Naxos-Union: SCG 80 JOT 9 KE 226 -Price: per piece -Number: 2 pieces -Weight: 8.4 kg

450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 18 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 130/248 mm -Weight: 14.7 kg/piece