134,838 used machines on RESALE, but how to find them? Machine Search
Control: HEIDENHAIN iTNC-530 for axes: 5 x-travel: 712 mm y-travel: 508 mm z-travel: 515 mm -A-axis table swivelling: +30/-120 ° -C-axis table rotating: 360 ° rotary table dia.: 330 mm no. of tools in magazin: 60 max. tool diameter: 88 mm max. tool-dia with free toolbox: 125 mm max. tool length: 280 mm max. tool weight: 7 kg spindle taper: SK40 Big Plus spindle turning speed range: -15000 U/min power capacity - milling spindle: 25 kW weight of the machine ca.: 12.8 t dimensions of the machine ca.: 303x395x367 cm 3D measuring tracer: RENISHAW Zero point clamping system:: LANG TECHNIK Coolant through spindle: pressure: 20 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Intake manifold Ø 160 mm Rated speed 2,890 rpm Nominal flow rate 1,448 m³/h Negative pressure at V nominal: 2,503 Pa Rated current 4.2 A Motor power 2.2 kW Weight approx. 340 kg Connection 400V/3~/50Hz Fuse 16A Filter 85100301 Cat M Filter Regeneration: Hand Shaking
X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clampin ...
inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min : 165 mm distance spindle - column: ? mm weight of the machine ca.: 28 kg dimensions of the machine ca.: 350350200 mm Shipping weight: 35 kg Packing: ( ca. 400400400 ) mm No. 5532 1 used Milling head BoKö / BOHNER & KÖHLE, type UFK 14 P Inner taper of the milling spindle: Collet holder Collet diameter: unknown Speed range: 1.3 x the drive speed Bolt circle 165 mm Weight approx. 35 kg Size approx. 35 x 35 x 20 cm Shipping weight approx. 35 kg Shipping dimensions approx. 40 x 40 x 40 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 280 / 300 mm y-travel: 250 / 270 mm z-travel: 300 / 310 mm turning speeds: 45 - 2240 U/min turning speeds: 18 Stufen spindle taper ISO: 40 quill stroke: 60.0 mm table:: 670 x 320 mm table load: 150 kg feed range: 12.5 - 630 mm/min feed: 18 Stufen rapid traverse: 1.200 mm/min workpiece weight: max. 150 kg T-slots: 5x 12 x 63 mm total power requirement: 1.6 kW weight of the machine ca.: 1100 kg range L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=7IsC5cg9WlI Features: - Robust electric-driven universal milling machine - ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button - Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions - Pivoting milling spindle guard - Coolant system - Lower chip tra ...
tool taper bore: FETTE number: 2 thread pitch: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of knives: Fette z= Diameter: Fette mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): / mm x-travel: 1750 mm y-travel: 1250 mm z-axis: 1250 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 / 710 mm y-travel: 275 mm z-travel: 350 mm taper in main spindle: ISA 40 table surface area: 900 x 250 mm T-slots: 3 x 18 x 60 Stk. turning speeds: 32.0 - 2000 U/min feed stepless: 15 - 750 mm/min voltage: 400 V total power requirement: 4.0 kW weight of the machine ca.: 1400 kg range L-W-H: 1000 x 1400 x 1800 mm from a training workshop (vocational school) Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 360 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1370 x 320 mm feed:: H 80 - 830 / V 23-625 mm/min. turning speeds: H 35 - 1500 / V 45 - 1660 U/min distance spindle /table: H 30 - 430 / V 210-610 mm rapid traverse: Z Achse 750 mm/min throat: 305 - 805 mm T-slots: 3 x 14.0 mm table - swivable +/-: -45 / +45 ° workpiece weight: max. 300 kg coolant pump: 25.0 L/min. total power requirement: 7.6 kW weight of the machine ca.: 1540 kg range L-W-H: 1840 x 1830 x 2050 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system Huron, adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gea ...
CONTROLS CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm rotating range B-axis from: -115 ° rotating range B-axis up to: 30 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 ° TABLE clamping surface diameter: 450 mm workpiece load (max): 200 kg SPINDLE / HEAD spindle revolutions (max): 20000 /min AXIS DRIVES rapid traverse X: 22000 mm/min TOOL MAGAZINE number of positions: 220 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 4400 mm space requirements -front/back-: 3400 mm total height: 2700 mm total weight approx.: 8000 kg ATTACHMENTS digital display: yes chip conveyor: yes coola ...
General SKU042W187 MakeHenschel TypeHU/G-15 Mach.No.80 08 91 Year of construction1985 Main Features MaterialStainless steel Volume15 Ltr. Motor1.1 KW Specified Features - Universal mixer Universal mixercheck Capacity15 l. Vessel sizesø 295 x 235 mm With covercheck Manual operated outletø ± 65 mm With motor± 1,1 kW With variable speed drivecheck Rotor speed± 86—535 rpm With lump breakercheck With motor± 0,5/0,75 kW Rotor speed1500/3000 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 General LocationBarneveld With switchcheck Floorspace1,0 x 0,5 m Total height1,3 m Weight290 kgUniversal mixersCatalysts & fillersDiscountDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalNew arrivalsMinerals & inorganicGeneric medicinesPowdered foodsPaints & coatingsHenschelMi ...
For sale is a REFORM UWF 32 D universal milling machine, built in 1996, in a robust industrial version. The machine is equipped with a HEIDENHAIN 3-axis digital display and has a generous milling table of approx. 800 × 400 mm. Thanks to its solid conventional design, it is ideally suited for tool and machine construction, maintenance, repair work, as well as the production of individual parts and small series. The machine is in a good used, age-appropriate condition. Signs of use and paint wear are present and can be seen in the pictures. Technical data Manufacturer REFORM Model / Type UWF 32 D Machine type: Universal milling machine Year of manufacture 1996 Serial No. 11.031 Power 1.87 kW Table size approx. 800 × 400 mm Digital display HEIDENHAIN Display 3 axes Operation conventional / manual Milling head vertical version Router Table T-slot Table Machine vi ...
General SKU086S374 MakeFukae Powtec TypeFS-GC-1200J Mach.No.424 Year of construction1988 Main Features MaterialStainless steel Volume2400 Ltr. Motor55 KW Specified Features - Universal mixer Universal mixer(1x) Capacity2400 Ltr Vessel sizesDia. 1850x1000mm With covercheck Inlet2x dia. 500mm, 1x dia. 160mm Outletdia. 250mm With motor55 KW, 415 Volt With lump breakercheck MaterialStainless steel General LocationBarneveld With switchcheck Floorspace3,9x2,4 M Total height3,2 M Weight9500 KG Extra Specifications- RECONDITIONED -Universal mixersReconditionedCatalysts & fillersDiscountDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicGeneric medicinesPowdered foodsPaints & coatingsFukae PowtecMixers > Universal mixersReconditionedIndustries > Chemical > Catalysts & fill ...
A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible.
Class/vehicle type: semi-trailer tractor and tractor unit, body type: closed, color: green, curb weight: 6.084t, gross vehicle weight: 10.6t, max. permissible axle load axle 1: 6.2t, max. permissible axle load axle 2: 6.2t, drive type: diesel, max. speed: 95km/h, power: 110kW, displacement (P1): 7675cm³, rated speed: 2600rpm, stationary noise level: 90dBA, engine speed for stationary noise measurement: 1950rpm, mileage: 235,340km, with documentation. An on-site inspection is possible.
Stephan UMC5 Universal Machine used Stepless speed Bowl capacity: 5 litres Double coat Frequency Inverter 300-3000rpm Knife insert good condition with vacuum pump and temperature control unit Pointer of the pressure gauge is crooked, does not affect the function should be thoroughly cleaned before use. It is fully functional and runs neatly and smoothly. Video about test run available
Stephan UMC12-F Universal machine Stainless, Bowl capacity 12L, jacketed bowl, with vacuum, variable speed, with Haake D8 circulating waterbath, top mounted bowl scraper, on mobile stainless frame, 3Ph
x-travel:1000 mm y-travel:1150 mm z-travel:700 mm table-size:900 mm table load:1500 kg spindle speeds:10.000 1/min spindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nm spindle taper:A100 HSK T-slots:18mm/7/100 mm milling feed range:20.000 mm/min rapid traverse feeds:X/Y/Z: 24 m/min diameter of tools max.:150 mm workpiece length:300 mm weight of tools max.:20 kg weight of the machine ca.:15 t dimensions of the machine ca.:s. Katalog m CNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fach Scales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20
x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table
<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now
Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock
<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once
The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months
<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once
used
Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...
Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new
used
Ladies and gentlemen, Offer: TRANSPORT Grain wagons TYPE Uagps For rent All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place ...
used
Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.
Material: stainless steel Engine: 22 kW Content: 680 ltr. Vat tiltable. Good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.
We can offer several thread rolling machines with cylindrical dies, any size.
used
Ladies and gentlemen, we are pleased to offer larger quantities of rice for sale. If you are interested in our offer, please contact us. Yours sincerely Trade & Translations
for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt
Stackable container Manufacturer GEMP and UDE inside polished Pharma Manhole diameter 450 mm Drain valve DN 80 Weight: 300 kg Number of pieces: 8 pieces available
P109 - used approx. 50 m³ / 50,000 litres polyester silo / GRP-silo, vertically standing, with funnel and support frame 3 x 3 m, in good condition. Twice in stock. volume: approx. 50 m³ / 50,000 litres material: polyester / GRP diameter: approx. Ø 3.00 m height silo: approx. 8.50 m height with support frame: approx. 12.00 m The container can be used as storage silo for water, liquid feed, flour, whey, potato steam skins, salt brine, dried fodder, molasses, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers ...
Thank you for your interest in our used machines we can offer you as follows: Many thanks for your interest in our second-hand machinery, please find below our offer: Manufacturer / manufacturer: National Lab model / type: 1000-1 Proficool UKT recirculating cooler/chiller chiller temperature controller Details / different: laboratory chillers ProfiCool UKT 1000 1 / almost good as new! Extremely quiet laboratory chillers with maintenance-free, air-cooled chiller. Heat exchanger made of brass. Control Panel with electronic controls with digital display (LED) as well as separate a / output switches for pump and cooling. External casing made of stainless steel. Filler for filling of the cooling circuit. Hose connections (olives) with a 12 mm outer diameter.
used
Storage tanks outside marbled for wine, water, fruit juice, schnapps 1.000 liters NEW! Measurement und weight: Diameter: 920 mm Total height: 2150 mm Cylinder height: 1500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges) ...
Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once
Storage tank outside marbled for wine, water, fruit juice, liquor content: 2,000 litres NEW! Dimensions and weight: Total diameter: 1110 mm. height: 2650 mm Cyl. Height: 1500 mm Material: V2A - AISI 304, V4A - AISI 316 surface: top shelf: V2A = 304, inside outside marbled IIID Cylinder: 304 = V2A, inside IIID, outside marbled floor: 316 = V4A, 2 B = IIIC marbled top shelf: conical bottom 1 x loading and venting connection DN50 2 x lifting eyes Cylindrical tank: 2 x Head hook 1 x manhole front oval 430 x 320 mm swivel with bracket and bracket 1 x tasting valves DN 15 (extra charge) 1 x Tauchschaftshülse for temperature display (extra charge) 1 x thermometer digital (surcharge) 1 x indicator bar with scale 1 x clear drain valve DN 50 and DN 50 (surcharge) end cap Underbody:-Conical spout flooring 1 x front drawn with valve DN 50 and DN 50 (surcharge) end cap 3 x len ...
Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once
maximum number of results exceeded
please refine your search
