deckel 80 u used for sale

Gardner 800l ribbon blender 800l ribbon blender, single shaft, stainless internals, swing top lid, discharge chute, 3Ph

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 80 x 160 mm -Number: 1x recordings available -suitable for: tool changer -Price: per piece -Weight: 9 kg/piece

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knives: 4 Rotor blades: 7 x 4

Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knives: 4 Rotor blades: 7 x 4

Gear motor, electric motor, electric gear motor -Speed: 76 rpm -Power: 0.55 kW -Construction: bevel gear B5 -Diameter hollow shaft: 25 mm -Rezess: Ø 70 mm -Hole spacing: 55 mm -Protection class: IP 55 -Dimensions: 355/210/H155 mm -Weight: 15 kg

Gurutzpe Super BT lathe. Distance between centers: 8.000mm. Swing: 2.000mm. Swing in carriage: 1.680mm. Swing on gap: 2.360mm. Spindle bore: 102mm. Equipped with chuck and steady rest. DRO Fagor. CE protections and european certificate for second hand machines.

Gear motor, electric motor, electric gear motor -Speed: 11.2/22.6 rpm -Power: 0.37/0.55 kW -Shaft diameter: Ø 30 mm -Construction: B5 angle -Protection class: IP 54 -Dimensions: 490/230/H240 mm -Weight: 33 kg

Line filter for frequency converters -Manufacturer: Corcom -Type: 80FCD10B -Number: 1x filter available -Price: per piece -Dimensions: 310/170/H140 mm -Weight: 8 kg

Gear motor, electric motor, electric gear motor -Speed: 105 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x engines available -Price: per piece -Dimensions: 520/200/H225 mm -Weight: 32 kg

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

Gear motor electric motor Electric gear motor -Speed: 47 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 48 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 415/210/H260 mm -Weight: 20 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Overload safety clutch, overload protection -Manufacturer: Mayr -Type: 800 N -Admission: M16 -Dimensions: 300/110/H50 mm -Weight: 2.3 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg

Gear motor, electric motor, electric gear motor -Speed: 56 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33 -Weight: 24 kg

This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Thickness: 5.0mm -Width: 100mm -Length: 21,800mm -endless -Number: 1x band available -Weight: 12kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Frame width: 1,170 mm / height: 900 mm / frame depth: 800 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

Grinding and polishing machine for the shoemaker's profession, cleaned and tested.

Key data: 64 , 80 , 400

Execution: Aggregate type: transportable Execution: PTO generator Technical data engine: Engine manufacturer: Tractor Technical data generator: Generator manufacturer: Endress Generator type: EZG 80 / 4 IT / TN-S Generator power: 80 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Hand start Switch: Generator switch 4 poles Delivery: Built Dimensions of the PTO generator: Width approx. mm: 740 Height approx. mm: 1.007 Length approx. mm: 1.192 Weight approx. KG: 500 Stock number: 1372 Condition: New Year of construction: 2023 Delivery period: Instant Verl Hours: 1 Location: Verl - Germany Scope of delivery: PTO generator 80 kVA – Brushless with electronic voltage reg ...

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm -Drawer heights: 260 mm -Weight: 216 kg

Rheon SR-2 bread and roll production line: Weigher capacity: for rolls: up to 3,600 pieces/hour for baguettes: up to 800 kg/hour for loaves: up to 1,500 kg/hour Cuprounder capacity: for rolls: up to 2,400 pieces/hour Consisting of: Rheon V4 Stress Free Divider Type VX 212-800 Year of manufacture 2010 Dough strip width 130-150 mm Product weight range approx. 50 - 2,000 g With round cutting knife With 2-row guillotine With distribution station With 2-row weighing and discharge belts With star cutter oiling With 2 flour dusters With digital control With hopper for approx. 50 kg of dough Includes RHEON CUPROUNDER TYPE SR 002 Year of manufacture 2010 Weight range for rolls approx.: 50–100 g Includes bmTEC processing table Year of manufacture 2022 Dimensions approx. W: 100 x H: 100 x L: 180 cm with wooden panels 40 cm/25 cm wide with conveyor belt ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 2000 G 26 F Engine No.: 544101778 Power: 709 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HC 634 G Gene. No.: 23011477 Generator power: 810 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.050 Height approx. mm:  ...

Pester PEWO-pack 800 shrink packer für bottles/aerosol cans, right-angled infeed belt with grouping station, sealing width max. 800 mm, product infeed width max. 850 mm, product infeed length max. 350 mm, product infeed height max. 250 mm, capacity up to 25 collations per minute, electrics 400V/50-60Hz, power consumption 16.8 kW, operating pressure 5 bar, machine net weight approx. 700 kg, previously used for packing aerosol cans

Citrocasa 8000 SB-ATS orange juicer Comes from an insolvent REWE store Built in 2018, but was not in use for the last two years until the eviction The machine makes a very neat impression The protective cover on the left side has a nose broken off. This does not affect the function, the cover can be replaced. There is still cleaning and disinfecting agent in the base cabinet with which the machine can be kept clean and germ-free. It starts up when the tap is actuated, but can also be switched to continuous operation.

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Machine control, monitor, Sinumerik, line control -Manufacturer: SIEMENS, Sinumerik line control central device -Type: Sinumerik 805 6FC4100-OAA-Z -Dimensions: 510/300 / H100 mm -Weight: 5.2 kg

Converter, power supply, power supply unit, switching power supply unit, power supply unit -Manufacturer: Siemens Schroff, power supply switching power supply -Type: Siemens 805 Schroff SC 8030 -Technical data: see nameplate photos -Dimensions: 290/135 / H65 mm -Weight: 1.9 kg

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

Conveyor belt, Fabr. Büttner, Type LB 1,3/800

Flour wagon approx. 80kg, stainless steel

Mounting plate, plate field, aluminum plate -Mounting plate: made of aluminum, with threaded holes -Sheet thickness: 25 mm -Threaded holes: M12, spacing 100 mm -Dimensions: see photo technical drawing -Overall dimensions: 1290/800/H120 mm -Weight: 65 kg

Safety cabinet, dangerous goods cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet, electronics cabinet, battery cabinet -Battery cabinet: 4 shelves, with smoke detector -Width: 600mm -Depth: 800mm -Height: 1800mm -Transport weight: 170 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

electro-mechanical pull installed in a mounting frame made of aluminum profiles Function: Deportation of the incoming material 90° to conveyor direction Make: Transnorm Measurement of the mounting frame: Lxwxh = 1.075 1.125 x 1 000 mm Measurement of the Abschiebepaneels: H = 600 mm, 650 mm, B = Total weight: 108 kg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 800 x 445 mm, height 595 mm -Wall thickness: 30 mm -Grooves: 120 x 21 mm / 80 x 21 mm -Dimensions: 800/445/H595 mm -Weight: 197 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...

Data sheet Retrofit Pos. Tr 015 TRANSNORM strap foerers 800-600-500 Type TRANSNORM TS 1100 Laenge strap foerers 800 mm Total width 600 mm Strap width 500 mm Strap type E 8/2 gruen Drive station COMPACT Drive drum motor Type: TM 113 B25-434 Z, FU preprepared Power: 0.25 kW Voltage: 230/400 V, 50 Hz Foder speed 1.03 m/s Stuetzen without hustle and craps, please request if necessary Functional, visually good condition Features: condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: Van der Graaf Trommelmotor Ampere: 0,71 Conveyor speed m / s: 0,02 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung  ...

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1500mm -Depth: 800mm -Height: 840mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 1x workbench available -Price per piece -Weight: 106 kg/pc.