deckel 80 u used for sale

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

3 pcs proportional valves + control unit, R900948284 + VT-HNC100-2…, Rexroth, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - The parts were removed from die-casting machines. The scope of delivery consists of: 3 used Rexroth proportional valves. It is possible that the valves function without any problems or that some may require refurbishment. The current market price of the new valve is approximately € 20,000. Our selling price is € 490 per unit. 1 used Rexroth control unit VT-HNC100-2-30/P-I-00/000. These control units are no longer available on the market, but are necessary for these valves. Our selling price is € 990. Applies to both items. Sale ...

A Hitachi EX1200 Hydraulic Excavator is the basis of the Mantsinen 140 RHC to act as a Ship Unloader for billets. Maintenance records are available including recent major service description. The list of equipment includes several auxiliary parts, such as a lifting yoke, a lifting head and a beam. Make: HITACHI (Japan) – MANTSINEN (Finland) Model: EX1200 – 140 RHC Year (manufacture): 2003/2004 Mothballed since: July 2025 Working hours: circa 21,600 Maintenance history: Serviced in May 2025 incl. lift cylinders overhaul which means it is expected to run for approximately 930 hours until the next service Mass: 910 / 108,000 / 153,000 kg Cabin Elevator / Hydraulic Excavator / Ship Unloader Maximum load: 25,000 kg Engine power / type / family: 482 kW / S6R-Y2TAA-2 / SR-TAA Fuel: Diesel

A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.

NUMBERING AND PERFORATING UNIT FOR SPEEDMASTER 52 -As new, used just few times -Shaft with 2 wheels -2 cams, one perforating arm -Available immediately in our warehouse

This is a LOMA Systems IQ-series industrial metal detector, commonly used in food and dairy processing lines. Here’s a clear, practical breakdown of what it is and what it does., Its job is foreign body detection — specifically metal contamination — to protect:, - Product safety, - Equipment (pumps, fillers, valves), - Brand and compliance (HACCP, BRC, IFS, etc.), You’ll typically find these on:, - Dairy products (cheese, butter, powders), - Ready meals, - Meat & poultry, - Bakery, - Packaged foods on conveyors, What metals it detects, The IQ range detects all three common metal types:, - Ferrous (iron, steel), - Non-ferrous (brass, aluminium), - Stainless steel (the hardest to detect in food environments), Sensitivity depends on:, - Aperture size, - Product type (wet/dry, salt content), - Conveyor speed, - Calibration, The LOMA IQ control system, The LOMA IQ® controller you sho ...

Key data: 800 mm, 510 mm, 550 mm

Universal Machining Center Manufacturer: Reiden Type BF1 Year of manufacture 1997 Control Heidenhain tnc 407 Travel X/Y/Z 800/510/550 Clamping surface D 630mm Table load 800kg max. speed 3100rpm 24 Way Tool Changer Tool holder SK40 Chip conveyor Monitor new, central lubrication new, rotary encoder rotary table new, glass scale X-axis new. The machine is 100% functional, ready for immediate use. For more information, I am always available at 01778957069.

Processing dust extraction substation COMPOSED OF: - Centrifugal dust extraction fan - N. 132 sleeves diam. 120 H 3000 mm. with baskets - Suction capacity 20,000 m3/h - Material discharge system with rotary valve - Bag cleaning system with blowers controlled by a cyclic economizer - Motor vibrator on discharge hopper - CAM Logic on the discharge hopper for clogging level signalling - Electrical control panel - Centrifugal fan mod. EUC 801 30 kW i14

Key data: 750 mm, 650 mm, 560 mm

Universal CNC Machining Center Manufacturer: DMG Mori Type DMU75 Monoblock Year of manufacture 2014 IBN 2015 Control Heidenhain iTNC530 Control a 23.075h Engine a 22.287h Program run 12.946h Operating hours 12.891h Travels X/Y/Z 750/650/560mm Table size 800 x 650mm Table load 600kg C-axis b-axis -120° + 120° Tool holder HSK63 60 Compartment Tool Magazine IKZ 40bar Blum Wireless Push Button Electronic Handwheel HR410 Belt filter system 500l Motor power 35kW Torque 130/86/0 Machine is in a used very good condition. Geometrically very good. Without vice, without tool holders

Chamber filter press REWA 1000/55 Panel format 1000 x 1000 mm Number of filter plates 54 + deflection plate Filter area 85 m2 Press capacity approx. 1358 dm3 Panel package length approx. 3750 mm Filter pressure approx. 15 bar Dimensions L x W x H 6000 x 1600 x 1700 mm Weight approx. 8 t Refurbished delivered by REWA in 2019, only 3 years in operation for vegetable oil Optionally with Abel CM-G-C261-ED piston diaphragm pump, 5.5 kW

Key data: 400 mm, 375 mm, 250 mm

With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine.

This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information.

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

This 3-axis Zayer KF 4000 was manufactured in 1989. It features a large table of 4,000 × 1,000 mm, capable of handling loads up to 10,000 kg. Equipped with a spindle speed of up to 3,000 rpm and a power range of 30–37 kW, it ensures robust machining capabilities. Consider the opportunity to buy this Zayer KF 4000 universal machining centre. Contact us for more information about this machine.

This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.

This FPT DINO was manufactured in 2002. It features a Siemens 840D CNC, a table size of 1200x3000 mm, and travels of X2700, Y2200, Z800 mm. Equipped with a 5-axis continuous head with an electrospindle reaching 18,000 RPM and an 18-position tool changer. Consider the opportunity to buy this FPT DINO universal machining centre. Contact us for more information.

This 4-axis HELLER PFU2 was manufactured in 1987. A vertical machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking to enhance their machining operations with a reliable, used machine. Contact us for more information about this machine.

Table dimensions X/Y: 520mm/430mm, speed: 25000rpm, milling stroke: 43mm, milling spindle diameter: 22mm, cutter diameter min./max.: 3mm/40mm, weight: approx. 60kg. On site inspection is possible.

This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine.

This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information.

This 5-axis ESPE LAVA CNC 500 was manufactured in 2010, featuring a robust universal machining center design. It operates on a supply voltage of 200-240 V AC and supports a nominal output of 0.92-1.1 KW. The machine dimensions are 1090 mm in width, 1960 mm in height, and 840 mm in depth, weighing approximately 620 kg. If you are looking to get high-quality milling capabilities, consider the ESPE LAVA CNC 500 machine we have for sale. Contact us for more information.

This 3-axis ANAYAK Performer 2500 was manufactured in 2007. It features a Heidenhain TNC530 control unit, a versatile EMENA-VAR-3 milling head, and a robust table size of 2700 x 850 mm. Capable of handling a table load up to 6 tons, with traverse paths of 2500 mm in X, 1000 mm in Y, and 1100 mm in Z. If you are looking to get high-quality milling capabilities consider the ANAYAK Performer 2500 machine we have for sale. Contact us for more information.

This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information.

This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine.

Function: It serves as a housing and processing unit for the PacDrive controller cards (such as C400 or C600), which take over the logic and motion functions for up to 16 or more servo axes.

This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine.

pressure: t workpiece diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU204U932 LocationBarneveld CEcheck MakeSingle Pressure Working pressure17 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.30 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck With coolingcheck Capacity6 kW Temperature-5/+30°C With pumpcheck 3,1m³/h (2x) With temperature controllercheck With controlcheck Information TypeChill Advanced C-6-W Mach.No.152171 Year of construction2015 Mounted on wheelscheck With switchcheck Floorspace1,16x0,65 m Total height1,65 m Weight265 kg Extra SpecificationsPower 11.7 kVA, 16.3A, test pressure 21 bar, refrigerant medium R134a, volume 4.0 kg Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

Fanuc manipulatierobot die een last van 700 kg kan hanteren Het heeft een bereik van 2832 mm en is gemonteerd op een chassis van ± 18 meter.

Heating power : 7.5 KW Drive : 0.37 KW Medium : Water

Kohler Power Wave 5000TP UPS System 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company)

ABB Power Wave 33 UPS System 2014, capacity of UPS - 400 kVa, inclusions 100 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company), Two systems in stock

Schneider GVXI1000KH UPS System 2018, capacity of UPS - 640 kVa, inclusions 205 batteries and 3 power modules, serviced from new by Uninterruptable Power Supplies (a Kohler company)

New Spindle Oil Cooler for Emco Lathes Year of manufacture: 2023

This KUNZMANN WF4/3 universal milling machine was manufactured in 1998. It features a clamping surface of 650 x 350 mm, a maximum load capacity of 250 kg, and a tool holder SK40. Speed ranges from 40 to 2500 rpm with a quill stroke of 60 mm. The machine includes a control cabinet and weighs approximately 1300 kg. Ideal for precise milling applications. Reach out for more information about this machine.

This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information.

Deep Drilling Machine brand Buck Year of construction 2000

A fully automatic unscrewing machine M. Adelski is available. Unscrewing heads: 5, capacity range: 2000-12500bottles/h, working height: 1090mm, bottle types: NRW/Euro, bottle volume: 0.5l, machine dimensions X/Y: approx. 950mm/850mm, weight: approx. 1400kg, operating hours: approx. 8500h. Documentation available. An on-site inspection is possible.

Industrial belt conveyor unit suitable for material handling and internal transport in production, warehouse, or packaging environments. The conveyor is mounted on a stable steel framewith adjustable feet and is equipped with an electric drive and control panel for reliable operation. The conveyor features a flat belt with side guides, allowing safe and controlled transport of goods. Speed ad operation are managed via the control box mounted on the support column. The unit is designed for continuous industrial use and can be integrated into existing production lines. Construction: Steel frame with adjustable supports. Drive: Electric motor Control: Control panel included Belt type: Flat belt conveyor

max. printing speed sheets: 8000 /h max. paper size: 32 x 46 cm dampening system: Aquaprint numbering unit: incl N+P The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6SL3040-1MA00-0AA0 SINAMICS S120 CONTROL UNIT CU320-2 DP SINAMICS Control Unit CU320-2 DP with PROFIBUS interface without CompactFlash Card As good as new. The device was only installed once briefly for testing. Was then replaced by another model. Comes in the box according to the picture, which is not the original box: Sale without warranty. VAT. The price is Euro 250,- + VAT. Pick-up in Bielefeld Jöllenbeck, or free shipping. You will receive replies to messages within our business hours. Mon - Thu 8:00 am - 3:30 pm / Fri 8:00 am - 1:00 pm

impressions: 76 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm numbering unit: include N+P dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

Offered is a conventional Vernier universal milling machine. 3-axis digital readout DRO. Including swiveling milling head, integrated swivel arm up to 250kg. Inspection by appointment possible.

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available

General SKU394U1123 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity6.45 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity 6,45 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) Information TypeTR 400 HK-EX Mach.No.HSK08028 Year of construction2008 Mounted on framecheck Floorspace1,75x1,0 m Total height1,75 m Weight1000 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

General SKU394U1125 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Water heaterWater/Glycol Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) Information TypeTR 400 HK-EX Mach.No.HSK0835 Year of construction2008 Mounted on framecheck Floorspace2.20x1,0 m Total height2,30 m ATEX compatiblecheck Extra SpecificationsThis Lauda is equipped with a heat exchanger. Brand: Merck Built by: Herbst Maschinenfabrik GmbH Factory number: 08-12583-26/1 Material: 1.4571, Stainless Steel 316TI Jacket data, pressure: -1/+16bar, test pressure: 25.2bar, temperature: -50°C/+200°C, capacity: 96Ltr. Tube data, pressur ...