deckel 80 u used for sale

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Twist drill bit with internal cooling DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) diameter: Ø 18.25 mm holder: Ø 20 m used, tested ! Dimensions: 200 x 20 x 20 mm

x-travel: 600 mm y-travel: 600 mm z-travel: 460 mm total power requirement: 4 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Manufacturer: Winterhalter - Type: GS660 - Heating capacity: 12.0 kW - Connected load: 15.8 kW - Rated current: 25.5 A - Water pressure: 250 - 600 kPa - Water temperature: max. 60°C Dimensions: Width: 137cm Depth: 86cm Height: 177cm

Hunkeler HL6 laser perforator The Hunkeler HL6 is a high-performance unwinder designed for use in digital printing and paper processing systems. It´s typically used in commercial printing environments where large volumes of paper need to be fed into printing or finishing machines. The HL6 is known for its reliability, precision, and speed, making it suitable for demanding production environments. It´s often integrated into production lines alongside other printing and finishing equipment to streamline workflows and increase efficiency. Basic equipment • Basic module with web feed and outfeed • Operating console and operating panel with display for setup and easy operation • Casing with safety monitoring • Register print mark reader top and bottom • Two matrix readers top • Editor for easy preparation of laser patterns • Chiller for cooling the lasers ...

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

Used envelope film machine, cellophone machine by WEGA type Fk-6 . Technical parameters of the machine: - Overall dimensions (L x W x H): 1050 x 670 x 980 mm; - Weight: approx. 180 kg; - Power supply: 1220V, 50-60Hz, 10000W; - Pneumatic supply 0.4-0.6 MP, 20 l/min; - Operating temperature: 15÷40oC. The semi-automatic foiling machine type FK-6 is designed for foiling rectangular boxes with flat and rigid surfaces using the enveloping method. Maximum output: 400 - 600 boxes/hour Maximum box dimensions: 70 x 200 x 230 mm Minimum box sizes: 7 x 60 x 50 mm Film parameters: - polypropylene coextruded film, heat-sealable on both sides, bi-directionally oriented; - thickness: 20-35 µm; - maximum width: 300 mm - minimum width: 70 mm - maximum diameter of film roll: 300 mm; - inner diameter of thimble: 76 ± 5 mm; - recommended film type: 25MB 400 Mobil Pl ...

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

JAFO FWF 32 universal milling machine was manufactured in 1989 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine, distinguished by its high functionality, versatility and reliability, is used for precision machining of workpieces. The stable design made of high-quality cast iron has, among others, an pull-out beam and a table with a large working area. The vertical torsion spindle used can work with a wide range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32 vertical milling machine weighs 2280 kg. Technical data of the JAFO FWF 32 milling machine - work table surface (L x W): 1300 x 320 mm - distance between spindle end and work table: 430 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam - arm for removing vertical spindle - installed power: 7,1 kW - power supply: 3 ...

GRASO PK030 shrink wrapping machine with GRASO TGW 30/80 heat shrink tunnel was manufactured in Poland in 2014 by Graso. The device, due to its versatility and advanced technology, optimises the process of packaging various types of products in unit packs as well as collective packages. Packaging made of heat shrink film effectively protects products from external factors, while enhancing their aesthetic qualities at the same time. The GRASO PK 030 packing machine has a large working area and a knurled bar, which guarantees excellent sealing quality. After sealing, a roller conveyor transports the product to the heating tunnel, where the film shrinking process takes place. After exiting the heating chamber, the finished pack is cooled by fans. The GRASO TGW heat shrink tunnel, in turn, is equipped with a control box, heaters with heat sinks and adjustable airflow by means of adjustabl ...

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Oiler can be filled under pressure P3KLA14LSMN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket

Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.

2 x Lindner Limator 1200 90 kW Year of Manufacture: 2013 6000 hrs Fully refurbished Find more here - / Contact us at -

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 7 kW weight of the machine ca.: 1.8 t required space: 2.3x2x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 head unpacker built in 2000

impressions: 44 Mio. max. printing speed sheets: 8000 /h max. paper size: 32x46 cm numbering unit: include The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity (max.): 600 pieces/h Connected loads: 220/240 V, 50/60 Hz, 17.5 A Machine dimensions (LxWxH):1520 x 790 x 1090 mm Machine weight: 160 kg Rated power: 3,700 W Rated current: 17.5 A Min. product weight : 0,05 kg Max. product weight: 15 kg Max. film width: 600 mm Max. film roll diameter: 300 mm Film roll core diameter: 77 mm Film thickness: 10-50 μm Availability: immediately Condition: well-maintained, in working order

Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,

(processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: PJ000016 // Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, exte ...

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

Key data: 120 mm, 1 kW

Extraction System Extraction FIELDS TYPE: AF10 Connection diameter approx. 120 mm Motor power: 1.1 KW mobile. The machine works. Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. all information without warranty. Subject to prior sale. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.

Danfoss Optyma™ PLUS condensing unit Type: OP-LPHC271NTP00E 114x3480 Compressor type: NTZ271A4LR1B Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C Dimensions: 1600 x 540 x 1800 mm Weight: 325 kg Number of fans: 2 x 600 mm Stock: 1 piece Stock number: AG 178 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Cool condensing unit Model: M5P CSGLE ZF 40-SB-P Compressor type: ZF40K4E-TWD-551 Cooling capacity for R404A: 22.1 kW at -10°C/40°C, 11.9 kW at -25°C/40°C, 9.5 kW at -30°C/40°C External dimensions: 1460 x 850 x 1410 mm Number of fans: 2 x 500 mm Stock: 1 piece Stock number: AG 177 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

Universal Mixer Stephan Bäcker Boy BB100 - Baker Mixer Stephan - Model Baker Boy BB100 - 100 litres - 11 kW - 24.5 A - 380 volts - Shell diameter: ø65cm - Boiler interior height: 39cm

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

For sale is a used Nordson Problue 10 hot melt machine

For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ex ...

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgDrive power (100% DC)9 kWSpeed max.12000 rpmDrive power (40% DC)13 kWDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z600/560/510 mmSpindle taperSK 40 DIN 69871 Max. torque82 NmTool Magazine with30 PositionsTorque (100% DC)54 NmWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hSafety Package for Power FailureSafety Package for Power ...

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T

Magnetic swivel table as shown in the pictures. Further information on request

Adpak A700 Sleeve wrapper Adpak Easy700 shrink wrapper, sleeve wrapper machine, sealing bar 750mm width, max product 600mm x 400mm, ideal for trays, bottles, cans, food, drinks, toiletries and more, mobile, 3Ph

SNA-11 Cooling Systems / Cooling Units Location B - Room E04, Cooler and K17, Ventilation 2 units Type Carrier 09CLU04090AF, functional, Built: 1992, HD Condenser Manufacturer: Carrier Refrigeration Technology GmbH Technical Data: - Refrigerant R 422; 25 bar - Includes 2 motors 65M07/65M08; KÜHNE KPER100L, Built: 1991, - 2.2 kW; 380V; 50Hz - Compressors from COPELAND DMRH 750EWM000 Find more here - / Contact us at -

Item condition: well-maintained Availability: immediately 6 pneumatic filling guns: not available Filling nozzle holder: no Lift-off: not available The area marked in red in the drawing is not present

Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min

2-Stage-Reverse Osmose System. Capacity: 27.000 liter/hour. See documents for technical description, component list and 3D drawings.

IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.