130,799 used machines on RESALE, but how to find them? Machine Search
Stitching and folding unit MKW SFT 350; Condition as is; suitable for connection to MKW gathering machines or as a stand-alone; 2 Hohner 52/8 stitching heads; folding device; Front cut; 2.Knife; open format 10x14cm to 50x70cm, folded format 10x7cm to 50x35cm. Stitch-fold unit MKW SFT 350; condition as is; used for MKW machines or offline; two stitching heads 52/8; folding unit; front cut; secound knife; open size 10x14cm to 50x70cm, folded size 10x7cm to 50x35cm.
Very good condition - charging can be done by seller Auction-ID: A3-43529-10980
Key data: 1000 mm, 750 mm, 750 mm
Travel X/Y/Z: 1000/750/750 mm Tool changer: ISO 40, 30 places Spindle speed: 12000 rpm Control: Heidenhain TNC 426 Machine is still under power... If you have any questions, just call or write.
Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg
Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device DVE 9070 Cover and protective film removal SFM 5072 Filling and sealing machine NTS 8140 Transport system Output max. 36,000 disposable syringes/h, infinitely adjustable For disposable syringes 0.5 - 10 ml depending on format set For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set For 100 mm nest For tub H max. 130 mm Parts in contact with the product made of stainless steel AISI 316L IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English Calibration (KAL) for all process-relevant measuring systems Material specification PLC Siem ...
AMD Radeon RX 480 8GB GDDR5 - untested and/or for parts or repair. Sold as-is Auction-ID: A7-46739-61
Customer returns - not tested. Condition as shown on photo Auction-ID: A7-46739-46
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
Pressure bar: 200 Quantity l/min : 20 Dimensions: 960x720x1200 mm Auction-ID: A7-46802-62
Year 2012 Auction-ID: A1-46617-146
With generators Auction-ID: A1-46617-26
Machine type: Conventional centre lathe Centre distance: 1,000 mm Max. swing over bed: 460 mm Max. swing over cross slide: 274 mm Max. swing over gap: 690 mm Effective gap length: 165 mm Bed width: 300 mm Headstock Spindle bore: 58 mm (82 mm optional) Spindle nose: ISO-D6 Spindle taper: MT6 Spindle speed range: 25 – 2,000 rpm (12 steps) Feeds and threading Top slide travel: 120 mm Cross slide travel: 290 mm Max. tool shank size: 25 × 25 mm Metric threads: 41 ranges, 0.1 – 14 mm Inch threads: 60 ranges, 2 – 112 TPI Longitudinal feeds (metric): 42 ranges, 0.031 – 1.7 mm/rev Longitudinal feeds (inch): 42 ranges, 0.0011 – 0.0633 in/rev Cross feeds (metric): 42 ranges, 0.014 – 0.784 mm/rev Cross feeds (inch): 42 ranges, 0.00033 – 0.01873 in/rev Module threads: 34 ranges, 0.1 – 7 m Diametral threads: 50 ranges, 4 – 112 DP T ...
Refrigeration unit FRASCOL LB2-Q736-0Y-2T with condenser USAC16E and compressor Q7-36.1Y1000. FRASCOL Q7-36.1Y1000 Compressor Power: 7 hp Flow rate: 35.86 m³/h with 2 pcs fan HIDRIA R11R-4525A-4T-5747 Power: 315W and 1420 rpm Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Technical Specifications & Performance DataThis Pentablock Filling Monoblock combines rinsing, filling, corking, and wire-hooding in a single compact rotary frame for glass bottle handling. Manufactured by Mondial, the LD 16-16-3E/PK-1RF-1V configuration delivers robust mechanical design with precise bottle control across the rinsing, filling, capping, and wire-hooding turrets. It is suitable for second hand installations and integration into a used bottling line focused on beverage production and industrial packaging.Model: LD 16-16-3E/PK-1RF-1VBottle materials: GlassBottle formats: Compatible with 0.33L and 0.75L bottle formatsRinser turret: 16 grippers (rotary)Filler turret: 16 valves, gravity/light depression technologyClosures supported: Crown cap, champagne-style mushroom corkWire hooding: Integrated wire-hood applicator for champagne-style closuresHMI: Siemens OP73 MicroTypical ap ...
Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...
Technical Specifications & Performance Data The Alfatek 15/1 ISO INNOVAZIONE is a second hand, isobaric filling monoblock designed for professional beverage production of still and sparkling wines. Built in 2002 by Alfatek, this compact unit combines precision filling with reliable capping, making it a strong choice for a used bottling line dedicated to glass wine bottles. Manufacturer: Alfatek Model: 15/1 ISO INNOVAZIONE Year of manufacture: 2002 Configuration: Isobaric filler + integrated capper (monoblock) Filler valves: 15 Capper: 1 head (wine closures as per configuration) Nominal speed: up to 2,500 bph on 0.75 L still wine (actual output varies by product and settings) Container type: Glass bottles Bottle format: 0.75 L Products: Wine (Still), Wine (Sparkling), Spumante Filling technology: Isobaric counterpressure for sparkling products Safety: Safety features included; interlocked ...
Technical Specifications & Performance Data The PREO E0P0514E2 is a robust, second hand case erector engineered for reliable end-of-line industrial packaging in beverage production and other FMCG environments. It forms regular slotted cartons (RSC) and secures the bottom flaps with hot-melt adhesive, delivering square, load-ready cases for downstream packing of PET bottles, glass bottles, aluminum cans, and multipacks. Model: PREO E0P0514E2 Category: Case Erector Manufacturer: PREO Year of manufacture: 2010 Rated speed: up to 1,500 bph (format-dependent), ensuring high-throughput case forming for a used bottling line Closure type: Hot-melt glue bottom flap closure Frame construction: Painted iron frame with stainless steel fairings for durability and hygiene Electrical supply: 380V, 50Hz Condition: IN STORAGE (idle and ready for inspection) Carton formats: RSC cases for a wide range of b ...
Technical Specifications & Performance Data The Enos Sigillatore is a reliable second hand case sealer designed to complement a used bottling line in beverage production and broader industrial packaging environments. Built in 2012, it aligns with medium-speed operations while ensuring consistent case closure for a variety of bottled and canned products. Manufacturer: Enos Model: Sigillatore Year of manufacture: 2012 Category: Case sealer for beverage and industrial packaging lines Line compatibility: sized for lines up to approximately 1,500 bottles/hour Operating direction: Left to right Typical application: Sealing corrugated cases for PET, glass, and aluminum containers Product types: Water, juice, beer, wine, soft drinks, and similar beverages Condition: In storage (used until 2018) Documentation: Manuals available Safety: Safety features included (guards and emergency stops) Sealing ...
Technical Specifications & Performance Data The FINPAC SHM B2 is a second hand sleeve labeling solution engineered for high-output beverage production and industrial packaging environments. Optimized for PET bottles, it delivers stable application of shrink sleeves and consistent shrink quality via an electric tunnel, making it a strong fit for a used bottling line seeking reliable, repeatable labeling performance. Manufacturer / Model: FINPAC SHM B2 Year: 2007 Category: Labeling Machine (sleeve applicator with electric shrink tunnel) Nominal speed: up to 9,000 bottles/hour Container types: PET (primary configuration) Bottle formats set up: 0.06 L and 0.50 L Typical bottle range: diameter 55â87 mm; height 120â240 mm Sleeve film thickness: 45â50 µm Number of stations: 1 Labeling method: Sleeve application (method code 8) Label placement: Full-body sleeve capability (plac ...
Used shrink wrapper SMI SK 450FTechnical Specifications & Performance DataThe SMI SK 450F is a second hand shrink wrapper engineered for high-speed industrial packaging in beverage production and related sectors. This model is well suited to operate downstream of rinsing, filling, capping, and labeling blocks within a used bottling line, delivering stable, brandable bundles for transport and retail.Manufacturer / Model: SMI SK 450FYear: 2009Category: Shrink Wrapper (film application with shrink tunnel)Production speed: up to 28,000 bottles/hour (format dependent)Bundling rate: up to 45 bundles/minute (collation dependent)Operating type: Automatic, continuous-duty shrink wrappingInfeed configuration: Straight inline entry for high-speed linesFilm handling: Works with printed film (print-mark registration) and neutral filmPackaging styles: Film-only and tray+film configurations (subject to ...
MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Used Capsuling Machine GAI 4264D The GAI 4264D is a reliable, second hand capsuling solution engineered for precise application of capsules on glass bottles in demanding beverage production environments. Operating at up to 3000 bottles per hour with 4 dedicated heads, this model is well suited for wineries, breweries, distilleries, and diversified industrial packaging lines seeking to enhance presentation and product security. With format compatibility from 0.06 L miniatures to standard 0.75 L bottles, it integrates seamlessly into a used bottling line alongside rinsing, filling, capping, and labeling equipment. Technical Specifications & Performance Data Optimized for continuous operation, the GAI 4264D offers stable output and repeatable capsule placement for premium appearance and brand consistency. Manufacturer: GAI Model: 4264D Year of manufacture: 1996 Category: Capsuling machine O ...
Alfa Laval Pasteurizer – Overview This pre-owned Alfa Laval pasteurizer is designed for continuous thermal treatment of dairy liquids, ensuring product safety and consistent quality for downstream processing and packaging. Built by Alfa Laval engineering, it offers reliable performance for beverage production and dairy operations seeking a dependable second hand unit to integrate into a used bottling line or industrial packaging environment. With a capacity range of 3,000 to 5,000 L/h, it is well suited for medium-scale production of milk destined for cheese, yogurt, sour cream, and goatâs milk applications. Recognized for robust construction and sanitary design, this pasteurizer supports efficient heat exchange and stable process control. Its throughput and versatility make it a practical choice for processors looking to optimize line efficiency without compromising hygiene o ...
Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for ...
Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and COâ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects COâ and ensures complete homogenization. Storage tank stabilizes th ...
Technical Specifications & Performance Data The Used Filter PADOVAN GREEN 6 (1997) is a proven winery filtration solution designed to deliver stable clarity and consistency for still wines while supporting the throughput requirements of a modern used bottling line. This second hand filter is in production with manuals available, enabling fast deployment in beverage production environments where reliability and cleanliness are critical. Manufacturer: PADOVAN Model: GREEN 6 Year: 1997 Filter type: 3 Operational status: In production Line support speed: up to 2,500 bph (bottles per hour) for still wine lines Primary application: Clarification/polishing of still wine prior to filling Manuals: Available Container compatibility via line integration: PET, glass, aluminum Bottle formats: Compatible with standard still-wine formats commonly handled on filling and capping monoblocs Connections: Sa ...
Technical Specifications & Performance Data The Used Filter Enomet Fitan 40 (2018) is a high-clarity, microfiltration solution designed for final polishing and microbial retention ahead of filling operations on a used bottling line. Engineered for beverage production environments, it combines sanitary construction with automated nitrogen backwash to maintain stable flow and consistent quality across water, juice, beer, wine, and other low-viscosity beverages. Manufacturer / Model: Enomet Fitan 40 Year of manufacture: 2018 Filtration grade: 0.2 µm microfiltration with nitrogen-assisted backwash Throughput: approximately 2.5â3.0 m³/h (2,500â3,000 L/h), product- and media-dependent Automation: PLC-controlled operation with automatic backwash cycles Construction: sanitary stainless-steel design for food and beverage applications Typical line position: upstream of filler and dow ...
Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!
Technical Specifications & Performance Data The Used Saturator Rivi 1990, model Carborivi 30, is a robust carbonation unit designed for continuous beverage production. Suited to modern and legacy used bottling line configurations, it provides reliable CO2 dissolution for water and carbonated beverages prior to filling. This second hand industrial packaging asset is appropriate for integration upstream of rinsing, filling, capping, and labeling equipment handling PET, glass, or aluminum containers. Manufacturer: Rivi Model: Carborivi 30 Year of manufacture: 1990 Operational status: In production Nominal throughput: up to approximately 30,000 L/h (product- and temperature-dependent) Processed products: water and carbonated beverages Container compatibility (via downstream filler): PET bottles, glass bottles, aluminum cans Dimensions (W Ã L Ã H): 2500 Ã 1500 Ã 3500 mm Documentat ...
Technical Specifications & Performance Data The Used Fossil Flour Filter Della Toffola NF 5 1996 is a pressure filtration unit designed for beverage clarification with diatomaceous earth (fossil flour). It is well suited for pre-bottling and canning stages in beverage production and industrial packaging lines, supporting high product clarity before rinsing, filling, capping, and labeling operations. Manufacturer: Della Toffola Model: NF 5 Year of construction: 1996 (maintenance performed in 2012) Filtration stages: 3-stage configuration for coarse-to-fine clarification Operating context: Suitable for isobaric process environments and prefiltration ahead of carbonated product filling Electrical supply: 400 V, 50 Hz Full load current: 15 A Safety features: integrated protections and interlocks included Documentation: manuals available Typical applications: filtration of water, juice, beer, ...
Technical Specifications & Performance Data The PG Used Pasteurizer PG 2008 is a stainless steel tunnel pasteurizer/rain cooler designed for reliable thermal treatment of jars, bottles, and cans within a used bottling line or food processing line. Built for tomato purée in 0.72 L glass bottles, it provides controlled heating and cooling via shower pasteurization and efficient water recovery. Manufacturer: PG Year: 2008 Construction: All stainless steel, hygienic design Conveyor: PG Intralox mesh modular belt Useful tunnel length: 13,500 mm Net tunnel width: 2,000 mm Water recovery: 3 tanks with dedicated pumps Process: Rain shower pasteurization and cooling Heat exchanger: Not equipped Process recorder: Included Steam system: Steam regulation group with stainless steel hood and outlet Infeed/outfeed: Belts for jars, cans, or pots Bottle/jar format: 0.72 L primary configuration Container ...
maximum number of results exceeded
please refine your search
100 € 
