deckel 80 u used for sale

x-travel: 530 mm y-travel: 430 mm z-travel: 400 mm spindle taper ISO: 40 milling-head swivable +/-: boring spindle: : 650x440 mm table - swivable: Grad turning speeds: 45-2000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKUR1215 LocationBarneveld MakeDiosna (D) Main Features MaterialStainless steel Volume800 Ltr. Motor55 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Universal mixercheck Capacity800 ltr. Vessel sizesdia. 1200x700mm With covercheck Inletdia. 250mm (1x) dia. 20mm (1x) dia. 100mm (1x) dia 50mm (1x) dia. 32mm (2x) Pneumatic operated outletcheck Outletdia. 200mm With motor55 kW 400 volt (Ex) Rotor speed127 rpm With lump breakercheck With motor13 / 16 kW 400 volt (Ex) Rotor speed1435 / 2930 rpm Information TypeP-800B Mach.No.294-009 Year of construction2004 Mounted on framecheck With switchgearcheck Floorspace2,7x1,9 M Total height2,9 M Weight5000 Kg ATEX compatiblecheckUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

General SKU041H133 MakeTK Fielder Ltd Eastleigh, Hampshire TypePMA-800/2G Pharma Matrix Mach.No.2486 Year of construction1985 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume800 Ltr. Motor48 KW Specified Features - Universal mixer Universal mixercheck Capacity800 Ltr Vessel sizesdia. 1300x600mm With covercheck InletDia. 220mm Pneumatic operated outletdia. 200mm Outlet180x320mm With jacketcheck With motor37,0 kW (400 V) With lump breakercheck With motor11,0 kW (400 V) Rotor speed2915 Rpm MaterialStainless steel 1.4401 (316) Information LocationBarneveld Floorspace3,0x1,6 m Total height2,5 mUniversal mixersDiscountTK FielderMixers > Universal mixersDiscountBrand > TK Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

Very good condition, like new. We plan and build the whole plant exactly for your needs. Are you looking for something else? Write us below!

Storage tanks outside marbled for wine, water, fruit juice, schnapps 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Qty. 1 Second-hand extrusion press with piercer Mfc.: UBE Force: 800 MT Built: 1979 Revamped: new hydraulic in 2010 Container dimensions: Dia. 90 x 555 mm Dia. 127 x 560 mm Dia. 132 x560 mm Material: Copper, Brass, Aluminium, Silver etc. Press is in good condition & on foundation

PRINT LINE COMPOSED BY: 1) PRINTING FLEXO MACHINE 8 COLOURS UTECO MOD. AMBER 808.IM UV NUMBER OF COLORS: 8 PRINT WIDTH: 1400 MM MAXIMUM WIDTH: 1450 MM PRINT REPETITION: MIN. 300 MM-MAX 900 MM SPEED 300 M/MIN YEAR: 1996 2) COMPLETE BASF LABORATORY FOR THE REALIZATION OF RUBBER CLICHE FOR PRINTING 3) CHANGE CLICHÉ ' 4) NR. 70 NEW KNURLED ROLLERS FOR PRINTING

Te Koop: Microzeef DSM pliers cleaning capaciteite 400 m3/uur zeef 80 micron lengte zeef 1275 mm totale lengte 2100 mm voorfilter 6 mm lengte voorfilter 510 mm doorsnede totaal 325 mm Bestel number 7241.1 Voor meer informatie kunt U bellen of mailen. Email: wh.derikx@gmail.com. Phone. +31 620758459 De nu kopen prijs is exclusief 21% btw.

Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

technical details: - suitable for heavy starting machines - 18 l large tank = long running time - electronic voltage regulation (AVR) - Thermo-magnetic circuit breaker against overload and short circuit due to defective loads and cables - Insulation monitoring = safe personal protection - Oil deficiency shutdown - E-Start = high comfort Metrics: - Length: approx. 842 mm - Width/depth: approx. 523 mm - Height: approx. 557 mm - Weight: approx. 96 kg Drive: - Engine: Honda GX 390 - Power factor: 0.9 cos ɸ - Starter: E-Start / Hand Start - Type of fuel: Gasoline - Tank capacity: 18 l - Consumption at 75% load: 2.2 l/h - Sound pressure level Lp: 72dB(A) - Sound power level Lw: 97 dB(A) Generator: - Type: Synchronous - Rated voltage: 230 V - Apparent power at LTP: 7.2 kVA - Active power at LTP: 6.4 kW - Apparent power at COP: 6.0 kVA - Active power at COP: 5. ...

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1370 rpm -Shaft: Ø 18 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 340/201/H160 mm -Weight: 10.6 kg

MBO K 800/6 S-KTLT with 2nd unit Age: 2006 Format: 780x1200 mm Equipment: Pallet Feeder K 800 - FP120 MBO Navigator Touchscreen Control Panel 6 buckles 1x Side buckle 2x knives 1x Side Buckle Electr. Double sheet control Anti Noise hood Slitter Shaft Cassette MWK Scoring, Perforating and Cutting devices for standard operations 2nd Folding Unit K 800.2-2-78/4 with double benefit device

x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2 x 2 x 2 m No. 3999 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 Drive: 3 Control: Heidenhain TNC 135 Fixed table 800 x 390 mm chip tray documentation Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine Hermle UWF 802M with Heidenhain TNC124 track control in super CONDITION Specifications: Year of construction approx. 1996 Rigid angle table Speed: 17 to 3550 rpm Infinitely variable feed in 3 axes from 0 to 1600 mm/min Drive Power .:6 KW Travel X/Y/Z: 500/430/400 mm Vertical Quill and Horizontal Quill - SK40 Hydraulic tightening system Weight approx. 2000 Kg Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment: >> Heidenhain TNC124 Track Control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> spindle brake >> operating instructions About the machine : A Hermle UWF 802M tool milling machine with Heidenhain TNC 124 route control is offered. This universal milling machine is in very good condition. A very easy-to-use route control. Lengths and radius corrections are possib ...

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1282 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 123 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/perkins-1006-6-pump-800-bar-used/17 876, , = More information =, , Type number: 1006-6 POMP 800 BAR

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Working Hours: 250 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 56 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-aifo-8041-i-40-55-pump-used/1 7874, , = More information =, , Empty weight: 895 kg, Type number: 8041 I 40.55 POMP

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-8045se-pump-580-mh-used/17870 , , = More information =, , Year of construction: 1010, Type number: 8045SE POMP 580 M³/H

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 342 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 415 , Generator Amps: 488 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/218737, , = More information =, , Type number: 80TCA GENERATOR 400KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 373 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 320 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 460 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/detroit-diesel-8v92ta-generato r-320kva-used/203, , = More information =, , Empty weight: 4.300 kg, Type number: 8V92TA 8083-7405 GENERATOR 320KV

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 410.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3412e-80m-1496 377-used/770, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 80M-1496377; Transport weight [kg]: 2500

2. Other and Auxiliary Systems SNA-17. Transformer Systems, Room K 14, Transformer 2 units Cast Resin Dry-Type Transformer Type GEAFOL TG 4951H, Built: 1990 Manufacturer: AEG Trafo Union Technical Data: - 800 kVA - Voltage level 10 kV / 0.4 kV - Dyn 5 Find more here - / Contact us at -

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats  ...

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 2 x 2 m No. 2392 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 mm Drive: 3 kW Control: TNC 135 With manual control: Working area 520 x 450 x 410 mm, fixed table 800 x 400 mm Tool holder SK 40 18 spindle speeds from 40 - 2000 1/min Feed stepless x,y 4 - 1600 mm/min z 4 - 1000 mm/min Dimensions 2.3 x 2.3 x 1.7 m Weight 1350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 222 m 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Ultrix 800 RT A high-end 5 interpolated axes multitasking machining centre. Designed for the highest performance in machining 3D shapes that require turning, milling, drilling and grinding.nbsp;Tailored to applications ranging from complex gears, impellers to molds, dies, tools,... for projects in aerospace, automotive, power generation,... max workpiece diameter: 900 mm A-axis: -30° / 110° C-axis: continuous max distance between spindle and table: 650 mm Options fitted to machine: 1 - high speed spindle of 40 000 rpm 2 - table with diameter 700 mm 3 - toolchanger with 150 positions 4 - chipconveyor 5 - coolant system with recuperation 6 - temperature regulation for coolant 7 - high pressure cooling (40 to 70 bar) through spindle 8 - smoke extraction system 9 - chip collection box 10 -nbsp;presetting system and tool integrity 11 - Renishaw measuring probe X-axis: 800 mm Y-axi ...

x-travel: 510 mm y-travel: 450 mm z-travel: 410 mm taper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mm T-slots: 6 Stk. turning speeds: 50 - 2500 U/min feed stepless: 4-1600/4-1000 mm/min voltage: 400 V total power requirement: 5.0 kW weight of the machine ca.: 1400 kg range L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition () Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left Digital display - without function Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9131203  ...

Technical data of the pallet rack crossbar: Shelving System: Metal Sistem Type: Unipal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction - Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal - Build in height 2950 mm - Maximum die height 1500 mm - Movable Table & Piston in X-Ways - Large package Die tooling radius 10/20/30/50/60/80/100  - Pressing force 210 kg/cm2 - Maximum stroke 800 mm - Machine 2350 mm placed in ground  

Ulma packaging line

The machine is in good technical condition, testing possible by prior arrangement. 20,000rpm, 24,000 hours, iTNC 530.

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

MIKRON UCP 800 Duro (2018) – 5-axis machining center Heidenhain iTNC 530 CNC Travel (X/Y/Z): 800 / 650 / 500 mm. Table 600 × 600 mm, workpiece weight: 500 kg (5-axis) / 1,000 kg (3-axis) A-axis: +120°/−100°, C-axis: 360° endless Spindle/Adapter: NCD 150 PL & NCD 200 PL, HSK-E63 Dimensions set-up (L×W×H, approx.): 3200 × 2400 × 3200 mm 10,000 KG Control ON: 30,064 h - Machine ON: 10,322 h - Program Execution: 4,159 h Drives ON: 7,331 h - Spindle ON: 4,231 h under power.

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: SAE 3 , Flywheel SAE: SAE 10 , Working Hours: 250 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 110 Kw, Rated Speed: 2980 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/iveco-8061-si-13-05-used/1 99, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8061 SI 13.05; Transport weight [kg]: 900

This 3-axis HERMLE UWF 802M was manufactured in 1994. It features a robust table size of 800 x 500 mm, capable of handling a maximum load of 500 kg. Equipped with a Heidenhain TNC control unit, it offers precise control with spindle speeds up to 6,300 rpm and rapid traverse rates up to 5,000 mm/min. Ideal for demanding machining tasks. Contact us for more information about this machine.

Kallfass Universa 8060 Spezial (1999) Type: Automatic L-sealer / shrink wrapping machine Format Max. product size: approx. 800 × 600 mm Max. height: approx. 200 ? 250 mm (depending on setup) Material Film type: polyolefin (PO), polyethylene (PE), PVC shrink film Film width: up to approx. 800 mm Performance Output: up to ~25?35 cycles/min (depending on product &, operator) Machine Data Year: 1999 Power supply: 400 V / 3-phase / 50 Hz Compressed air: required Machine type: semi-automatic or automatic (depending on configuration) Equipment / Features automatic or manual infeed (configuration dependent) L-sealing frame (angle sealer) integrated or inline shrink tunnel (optional/combined line) adjustable sealing time and temperature conveyor belt system film roll holder with easy loading electronic control panel safety guards and emergency stop quick format changeover suitable for single  ...

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

BOEHRINGER VDF V 800 universal lathe was built in 1977 in Germany. The machine, designed for precision machining of workpieces with a maximum diameter of 800 mm and a length of 1500 mm, is distinguished by its robust construction, which ensures excellent stability during even the most intensive challenges. On the other hand, the spindle features an optimised speed range, allowing efficient turning using both high-speed steel and carbide-tipped tools. All of this makes the BOEHRINGER lathe the perfect choice for both unit and series production. The total weight of the machine is approximately 5400 kg. Technical specifications of the BOEHRINGER VDF V 800 metal lathe - maximum turning diameter above the bed: 800 mm - maximum turning diameter over the slide: 515 mm - maximum turning length: 1500 mm - maximum spindle rotational speed: 1120 rpm - minimum spindle rotational speed: 5.6 r ...

1 mixing arm with bottom discharge screw all stainless steel right-left turn 1 speed dimensions (l x w x h) : ± 2.500 x 1.050 x 1.700 mm with new control box + control (Siemens logo) all new cables

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

Sinumerik 805 SM-TW with plug-in cards, New!, New, Siemens, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Sinumerik 805 SM-TW, consisting of: 1 piece Sinumerik basic rack, 805 SM-TW, 6FM2805-1WB00, 1 piece battery plug-in unit 6FX1410-0CX46 1 piece Sinumerik power supply, 6EW1861-3BA, 1 piece Sinumerik CPU, 6FX1138-5BB04, 1 piece Sinumerik basic memory module, without RAM, 6FX1128-1BA00 - sold! 1 piece Sinumerik 805 SM T/W software, 6FX1882-0BX22-4D, 1 piece Sinumerik 805 SM T/W basic software module 1, 6FX1882-0BX01-4D, Attention: All parts are new! These prices are absolute best prices and are only valid for the purchase of the whole position. We also sell the parts individually, see separate Ebay listings.  ...

Height rippler, parallel rippler -Max. working height: 800 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 380/90/H855 mm -Weight: 7.5 kg

Extruders 65-50-50 mm. diam.screws, K DESIGN thickness control, Double collection of 1.800 mm., Average throughput rate 200-240 kg/h, total installed power 350 kw, compressed air consumption 330 l/min, water consumption 10 l/min, air pressure 6-7 bar, min-max line speed 0-150 m/min, motor power 234 kw, resistive power 25 kw, reduction ratio 1/6, ac motor revolutions standard 2300 rpm, Cartridge filter changer, power 6.75 kw, Resistive power 32.6 kw, Die diameter 220 mm, Bubble cooling group, Electric fan power 22 kw, RV ironing motor 2.7 kw, Platform rotation 0.4 kw, Diagonal fans 0.75 kw, Speed ​​0-150 m/min, Double winder with calender, Total motor power 6kw, Min./Max. diameter of reels 150/900 mm, Max. reel weight 750 kg, installed power - used power in work: about 60-65% : 350, capacity: 200-240 kg/h, working width: 1.800 mm.

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.3 screens available (9-15 mm) Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), INSTALLED POWER: 45 kw, rotor size: 800x450 mm.

2025 BIG backhoe bucket 80cm with MS03 Symblock attachment, Technical specifications:, - Weight: 191 kg, - Recording width: 80 cm, - Contents: 278 liters, - CAT 4 - suitable for 4.0 - 5.5 t excavators

Doka Box 1.20x0.80m Storage and transport box Doka box 1.20 x 0.80m Storage and transport Box