130,760 used machines on RESALE, but how to find them? Machine Search
central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - incl. switch box with motor protection and contactor, - incl. oil pressure hose - incl. 400V connection cable with CE plug - Test: Smooth pump operation and immediate delivery - Can be plugged in and used immediately Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is n ...
central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - Including conversion for connection of an oil supply line, - Test: Smooth pump operation and immediate delivery Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the pr ...
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc 32iMB spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Manual Guide i The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9000 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...
UHF RFID-reader, 24V DC, DTE800, IFM Electronic, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...
Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...
Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A
Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The ...
Macmon M100 Universal Milling Machine with Digital Display -Feed range in steps 9-450mm/min -Horizontal 40-2000 rpm -21 spindle speeds vertical 50-2500 rpm -Spindle holder SK40 -Projection of the V-spindle approx. 100-320mm -Installation height under spindle 350mm -Vertical Head Quill 70mm -Vertical head swivels 360 degrees -Fixed angle table 215x600mm -Milling slide path transverse manual 170mm -Vertical motor/manual 310/340mm -Table travel longitudinal motor/manual 290/310mm -X-travel 310mm -Y-travel 340mm -Z-travel 170mm -Automatic feeds and rapid traverses in all 3 axes -Total power requirement 2.5kW -Spindle drive 2.2kW -Total drive 2.5kW-380V-50Hz Dimensions: LxWxH 1.5x0.7x1.5 meters / Weight 900Kg
PROFROID QC MT 100 PK Brand:PROFROID Type:QC MT 100 PK Stock number:M21-1293 Cooling capacity:6.82 kW Application:Cooling Number of fans:2 Refrigerant:R744 (CO2) Voltage:400 Volts Motor power:2x 0,25 kW Dimensions:1200 x 390 x 1430 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please visit also our website: used-refrigeration
PROFROID QC MT 30 PK Brand:PROFROID Type:QC MT 30 PK Stock number:M21-1292 Cooling capacity:2.25 kW Application:Cooling Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 360 x 1028 mm Weight:125 kg Year:2019 New/unused Number in stock:1 piece(s) Price:Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please also visit our website: used-refrigeration
PROFROID QC LT 75 PK Brand:PROFROID Type:QC LT 75 PK Stock number:M21-1291 Cooling capacity:2.04 kW Application:Freezing Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 690 x 1028 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 2 scroll compressors. Mentioned capacity at an evaporating temperature of -32°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration
a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.
Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for palletising counted sheet. Paper is counted by Bizerba paper scale, straightened and smoothened and in the jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet. However, equipment can also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine, then left standing
maximum number of results exceeded
please refine your search
