deckel 80 u used for sale

max height 420mm; min height 195mm; 5636 Auction-ID: A1-46416-324

According to photos, weight estimated. Tools included in the stacks 2 inverters are defective Auction-ID: A1-45666-18

Rotary table diameter: 700 mm Table surface: 1250 x 700 mm B-axis: +30 / -120 C-axis: 360 Tool changer: 32 times 2019: X/Y/Z guides and KGT renewed Auction-ID: A1-46607-120

NC rotary table (C-axis): Ø 630 mm 9 T-slots 14H7 T-slot spacing: 63 mm Tool magazine Type: Universal Tool Changer Magazine slots: 30 (optional 20) Compressed air: 5.5 – 8.0 bar Max. tool diameter: 130 mm Max. tool length: 350 mm (with tool breakage monitoring) Max. tool weight: 10 kg Electrical connection data Mains voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Total connected load: 35 kVA new spindle, running time 23,989 hours including SK 40 tool holders 15 pieces Auction-ID: A7-46729-2

ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-207

Machine number: 71401453 Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connection: 44 kVA Spindle hours read: 26350 Control: MILLPLUS Spindle speed: up to 12000 rpm Feed X/Y/Z axis: 20 - 15000 mm/min Rapid traverse X/Y/Z axis: 40 m/min Displacement measuring system Resolution X/Y/Z axis: 0.001 mm Input gauge X/Y/Z axis: 0.001 mm Position tolerance in X/Y/Z axis: 0.010 mm Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Tool holder: SK 40 incl. 60-fold tool changer Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage monitoring: 350 mm NC rotary table Clamping surface: 630 mm Diameter Distance between T-slots: 63 mm Number: 9 Centering bore: 50 mm Diameter Max. rotation of table top: 10.7 rpm Feed: 3600°/min Resolution of the measuring system: 0.001° incl. chip conveyor and cooling system Attention: the machine can be trans ...

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-203

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders.

Machine number: 71401453 Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connection: 44 kVA Spindle hours read: 26350 Control: MILLPLUS Spindle speed: up to 12000 rpm Feed X/Y/Z axis: 20 - 15000 mm/min Rapid traverse X/Y/Z axis: 40 m/min Displacement measuring system Resolution X/Y/Z axis: 0.001 mm Input gauge X/Y/Z axis: 0.001 mm Position tolerance in X/Y/Z axis: 0.010 mm Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Tool holder: SK 40 incl. 60-fold tool changer Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage monitoring: 350 mm NC rotary table Clamping surface: 630 mm Diameter Distance between T-slots: 63 mm Number: 9 Centering bore: 50 mm Diameter Max. rotation of table top: 10.7 rpm Feed: 3600°/min Resolution of the measuring system: 0.001° incl. chip conveyor and cooling system Attention: the machine can be trans ...

ASSFALG 168 T Grinding Machine

Stahlblech lackiert Innenliegende Rohre: 200 mm lang Ø 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock

Auction-ID: A7-46309-5

ASSFALG 168 T Grinding Machine Auction-ID: A1-46607-97

DECKEL FP4A – 3-Axis CNC Milling Machine General data: Manufacturer: Deckel Model: FP4A Machine type: CNC milling machine Configuration: 3-axis Description: CNC milling machine DECKEL FP4A designed for precision machining operations. The machine offers reliable performance and flexibility for various milling tasks, making it suitable for toolrooms, workshops, and industrial production environments. Auction-ID: A7-46498-60

- Tool changer: 16-speed - Chip tray available and chip conveyor purchased at a later date Auction-ID: A1-46607-1

Tool changer: 20 places electronic handwheel Auction-ID: A1-46607-119

Machine number: 2820-0492 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 19 A Control: DECKEL CONTUR 3 Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed: 2 - 3600 mm/min Rapid traverse: up to 4 m/min Tool holder: SK 40 Table dimensions: 700 x 460 mm with 7 grooves incl. vice, jaw width: 110 mm Reference: Hüpometall - Lot 22 Auction-ID: A7-46763-101

Friedrich Deckel, Model GK12, 3D Pantograph. Used by many of the top knifemakers for inlay and integral knives. Spindle adjustments, 1.5 to 1, all the way to 10 to 1 ratio. Adjustable spindle speeds. It's equipped with the 3D arm for more detailed and accurate 3D copying. It has a 3 phase motor, but runs easily off the Phase-A-Matic phase converter. Deckel is considered to be the Top of the Line Pantograph for knife and jewelry. Auction-ID: A7-46756-22

CNC vertical machining center for machining metal parts. Numerical control: Siemens 810D Strokes: X 630 mm / Y 500 mm / Z 500 mm Table: 800 × 500 mm Maximum table load: 500 kg Spindle cone: ISO 40 Spindle speed: 10,000 rpm Auction-ID: A1-46647-248

Machine number: 2300-0053 Speed: 40 – 2,000 rpm Table dimensions: 1,000 x 520 mm Number of table grooves: 6 Travels: X-axis: approx. 500 mm, Y-axis: approx. 400 mm, Z-axis: approx. 300 mm with swivel table, three-axis digital display (Heidenhain), new bellows, new cranks Reference: Showroom/Oberthür Auction-ID: A7-46763-347

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-46647-243

Serial number: 4432 Operating voltage: 380 V Frequency: 50 Hz Rated current: 13 A Speed: from 40 to 2000 rpm Tool holder: SK 40 Feed range infinitely adjustable: 5 - 500 mm/min Creep traverse: 4 mm/min Rapid traverse: 1200 mm/min Table Longitudinal movement: 300 mm Spindle block Transverse movement by hand: 160 mm Support Vertical movement motorized: 280 mm by hand: 290 mm without protective bar: 330/340 mm Vertical milling head on spindle block can be moved by hand: 100 mm Table dimensions: 600 x 210 mm with 4 grooves and an attached vice, jaw width: 160 mm Auction-ID: A7-46287-78

Serial number: 815 Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Table dimensions: 500 x 200 mm Universal part-head tip height: 170 mm Tailstock tip height: 120 mm (with intermediate support: 170 mm) Max. workpiece length between tips: 336 mm Workpiece diameter with self-supporting fastening: approx. 600 mm Max. tip length: 950 mm Inner cone Partial spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine stand), 8 mm (other elements) Sharpening stroke: 190 mm Transverse movement Tool holder: 100 mm Vertical movement Grinding head: 325 mm Tool holder: 230 mm Dividing head on tool slide: 330 mm Grinding head holder / Tool holder / Grinding head / Universal apparatus: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4000 / 8000 rpm (double priority) Infinitely variable DC: 2000 – 10000 rpm incl. two-axis digital display, Extensive accessories suita ...

Machine is equipped wit h HEIDENHEIN DIGITALS 2 TURNING HEADS TURNING LENGHT 1800mm HOLE TROUGH SPINDLE 76mm WITH LINETS AND ACCESORRIESS, READY TO WORK. BEFORE LOADING MACHINE WILL BE CLEANED FOR THE CUSTOMER.

Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

Details Machine no. 2042.6616-05 Year of manufacture 2004 Circumferential diameter over bed 1,000 mm Circumferential diameter over bed 1,000 mm Center height over flat web 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Three-phase motor infinitely variable (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control system Manualplus 4110, completely renewed about 1 to 2 years ago 2 Lynettes Equipped with rotary power chuck, diameter approx. 500 mm. Including a lot of accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix base holders, size D. Machine was equipped with a separate milling device, with its own control system, value approx. € 20,000.00. Only served by the owner, ver ...

TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-22

TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-23

TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-24

Auction-ID: A1-46331-78

TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-20

TPJ800 Roller Compactor 1000kg 75HZ Iron Iron Koop Diesel Engine Auction-ID: A1-45995-21

Auction-ID: A1-46617-86

Turning diameter 900 mm Turning length 5000 mm

Universal lathe TOS SN 40C/1500

Lathe CERUTI, distance between center 5m

Universal lathe, little used Model: SN 710S x 1500 Make TRENS SK Accessories: Digital Display 4 Jaws Face Plate Coolant tank

Table: 1850 x 800 mm Auction-ID: A7-32339-10

Lathe SARO SP 1250x3000, working condition

Universal lathe STANKO 1M63/1250

Machine Stanko 166, 6.3 meter DBC. Completely overhauled in 2024. Electric tailstock. Cable guides installed. Machine in like-new condition. Manual available. Dismantling and loading are included in the price. All headstock components are the same as on the DIP 500. An operator who already operates the DIP 500 can easily operate the 166 DIP 600 without retraining. The machine comes complete with two lunettes, a Ø 300-600 and a new Ø600-1050. Work piece maximum diameter: – above bed: 1250mm – above support: 900mm Work piece maximum length: 6300 mm Spindle speed(rpm): 5…214 Max workpiece weight: 10000 kg Motor power: 30 Kw Machine overall dimensions: – length: 10100mm – width: 2320mm – height: 2000mm Machine weight: 25000kg

Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

BERNARDO Super 180 universal lathe was built in Austria by PWA Handelsgesellschaft m.b.H. The machine on offer is an excellent choice for both unit and small batch production. It is capable of performing operations such as turning cylindrical, conical and end faces, as well as cutting metric and inch threads. Workpieces with a maximum diameter of 506 mm and a length of 1000 mm are machined by means of a reliable spindle, rotating within a range from 45 rpm to 1800 rpm. As many as 16 spindle speed adjustment stages enable precise adjustment of the cutting speed to the type of workpiece and the type of machining. The BERNARDO Super 180 also offers a wide range of longitudinal and transverse feeds. The installed digital readouts further enhance operator comfort. All this is complemented by an extremely rigid bed that perfectly dampens any vibrations and ensures maximum process stability dur ...

Spindle support for SUI 80 longitudinal direction

Youtube function and status video: https://youtu.be/2QVPFxir7vM - Former Linde full-service device - Service valid until 10/2026 - UVV valid until 10/2026 - Battery: 021/11/2018 48V 575Ah, very good performance measured with 50.4V - Duplex mast with full free lift - 3rd valve; with sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45451-170

Youtube function video: https://youtu.be/vM8odcIpQ8w Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk former Linde full-service machine, Auction-ID: A1-45451-385