deckel 1 used for sale

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 58 mm -Clamping depth: max. 190 mm -Number: 1x vises available -Price: per piece -Dimensions: 520/280/H155 mm -Weight: 55 kg

NH fuse -NH 2 -100 A 500 VAC Price: complete Quantity: 7 pieces -Weight: 4.2 kg

Power cable, solar cable -Energieflex: PV1-F PV1000-F -1x4 mm³: 0.6/1 kV -Dimensions roll: Ø 390/300 mm -Weight: 28 kg

Power supply, converter, converter, power supply unit, Smart-UPS -APC: Smart-UPS 1000 -Uninterruptible power supply -Connection: 220-240 V/50/60 Hz -Price: per piece -Number: 4 pieces -Dimensions: 435/170/H215 mm -Weight: 20 kg

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

Transnorm conveyor belt GF 1000-600-500 RA2125 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R17 DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 47 mm -Clamping depth: max. 157 mm -Number: 1x vices available -Price: per piece -Dimensions: 460/226/H130 mm -Weight: 33 kg

Transnorm conveyor belt GF 14500-700-600 RA2147 Technical data: Conveyor length (NL): 14500 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 14500 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed  ...

Proofer Hein GR255-122 Proofer Space for 3 racks or a bread trolley Width 1.22m Height 2m with superstructure 2.3m Depth: 2.55m Manufacturer: HEIN Type: GR255-122 Year of construction: 09-2016 complete with proofing chamber air conditioner

Spiral mixer Model No.: SM2-120 T Kneading machine with sophisticated and robust technology! Digital easy touch control with rewind button Dough machine with 3 timers 1 mixing gear and 2 forward gears for min/max. 9 - 120 kg dough Flour dust hood with damper Stainless steel boiler and spiral Machine mobile with 4 brakes DGUV V3 tested Connection 400V, 9.6 kW, 32A 32A-CEE plug Dimensions: 750 x 1230 x 1400/1920mm, WxDxH NEW Machine With a 24-month warranty More TOP bakery machines in stock!

Power cable, solar cable -VDE 0276 type: NYY-J 1x6 RE 0.6/1 kV -Dimensions roll: Ø 500/425 mm -Weight: 15 kg

Ref. -No.: 10335 Manufacturer: HÜLLER HILLE Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: 0 - 12000 RPM Rapid Traverse: 60 m / min Further information: Coolant system = 1250 l

Ref. -No.: 10304 Manufacturer: SPINNER Year of construction: 2007 Type of control: CNC Control: Siemens 840 D with SHOP Mill Storage location: Halberstadt Country of origin: Germany X-Travel: 1100 mm Y-Travel: 610 mm Z-Travel: 610 mm B-Axis: 0.001 prepared for 4 th axis ° Main spindle drive power: 25 kW Main spindle speed range: 6000 RPM Table surface: 1200 x 600 mm Table Load: 1000 kg Tool Taper: SK 50 Numbers Of Tools In Magazin: 24 axes: 4 Rapid Traverse X-Axis: 18 m / min Rapid Travel Y-Axis: 18 m / min Rapid Traverse Z-Axis: 15 m / min Main Drive: 25 kW Weight Of The Machine Ca.: 8 t Further information: - additional 4 axis (Dividing head)

Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Year of construction: 2007 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 60 Pcs./pcs. Tool dimensions (with occupied adjacent spaces): 125 mm Numbers Of Pallets: 2 Operating hours: 26180 H spindle running time: 26180h 43m 46s h/m/s automatic mode: 28559 H on time: 120 H pallet change time: 60 s Further information: internal coolant supply

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens 2.2 kW -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm -Connection output: 390 x 330 mm -Dimensions: 650/520/H470 mm -Weight: 52 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Dimensions: W800/H1200/D300 mm -Braids: several -Weight: 62 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Flex reciprocating saw: SK -Nominal power input: 1200 W -in :suitcase -Dimensions: 610/120/H250 mm -Weight: 5.8 kg

Ref. -No.: 10022 Manufacturer: UNION Year of construction: 2001 Type of control: CNC Control: Heidenhain-Steuerung TNC 310 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 2000 mm Machine length: 6950 mm Machine width: 4685 mm Machine Height: 3885 mm Table Height: 1050 mm Spindle Diameter: 110 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mm Faceplate speed: 5,6 - 224 RPM Spindle Speed: 5,6 - 1120 RPM Metric thread feeds: 1,25 - 56 mm Drive Capacity - Spindle Motor: 40 kW Weight Of The Machine Ca.: 25 t Bore Depth: W 800 mm Further information: with facing slide 13 inch thread feeds 1 1/8 - 28 Gg / 1 “ YOM: 1990/ Retrofit: 2001

Ref. -No.: 10154 Manufacturer: HEYLIGENSTAEDT Year of construction: 2014 Retrofit: 2015 Type of control: CNC Control: SINUMERIK 840D solution line Storage location: Halberstadt Country of origin: Deutschland Bed width: 2000 mm Feed rate: 1-5000 mm / min Turning Diameter: 2600 mm Turning Length: 10000 mm Centre Distance: 11500 mm Faceplate Diameter: 2000 mm Spindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPM Max. Torque: 120 Nm Max. Workpiece Weight: 40000 - 70000 kg Total Power Requirement: 230 kW Cross slide shift (X-axis): 640 mm Further information:

Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose, barrier fences -Snow fence: 2.25 m wide -2 rolls: a 50 m -Price: complete -Dimensions per roll: Ø 350/2270 mm -Total weight: 230 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 14 mm -Height: 55 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg

Ref. -No.: 10314 Manufacturer: PINACHO Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Cross Movement. (X-Axis): 365 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 500 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 685/65/H65 mm -Weight: 4.2 kg

Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm -Panel thickness: 69 mm -Weight: 1396 kg

hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Ref. -No.: 10301 Manufacturer: TITAN Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Ref. -No.: 10159 Manufacturer: KELLENBERGER Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 195 mm -Transport roller width: 735 mm -Hole: Ø 30 x 95 mm, Ø 30 x 68 mm -Dimensions: Ø 195 x 865 mm -Weight: 24 kg

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Danfoss FC-102P45KT4E20H1XG 45kW/60HP 131F0340, 3x380-480VFrequency Converter Item Condition: Used Bfisefoc2cy 60kg More items - new and used - can be found in our shop! International shipping costs on request!

Steel pipes, flush pipes -insulated copper pipe: EN 12735-1 -12 mm/1 mm -Length: 30 m -Weight: 8.1 kg

Motor centering flange, motor flange, pump flange, motor centering bell, clutch bell, bellhousing for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -Large recess: Ø 115 mm -Dimensions: Ø 180/H41 mm -Weight: 0.5 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 190 mm -Through hole: Ø 57 mm -Weight: 19 kg

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Rezess: Ø 155 mm -Hole circle: Ø 174 mm -Passage: Ø 54 mm -Weight: 11 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Kemper Spiral Kneader Type: SP 150 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 2 stainless steel boilers Automatic feeding of the vats Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted

Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 6-way -Weight: 90 g

x-travel: 10000 mm y-travel: 1100 mm z-travel: 1700 mm Control: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mm chip conveyor: universal head: table height over floor: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Metal bellows coupling, claw coupling, connecting coupling, torsionally elastic coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 14 mm -Number: 6x couplings available -Price: per piece -Dimensions: Ø 142 x 120 mm -Weight: 7.4 kg/pc.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Boret: Ø 20 mm -Dimension: Ø 176 x 140 mm -Weight: 12,6 kg

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

used, as good as new butter wrapping machine from SchmidtTec. Year of construction 2017 Output up to 1,200 pcs./hour Filling volume: 125g Format: L=100mm, W= 55mm, H= 25mm The machine was used for packaging Bio butter. Mint condition.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bohrung: Ø 10 mm -Dimension: Ø 108 x 95 mm -Weight: 3.5 kg

Container corner fitting, container corner, container parts -Number: 18 corner fittings available -Price per piece - Die stamping: DL TR 08 1118 / DL BR 08 1124 -Height: 160mm -Dimensions individually: 178/120/H160 mm -Weight: 11kg/pcs

Edgebander PB Engineering RIT 1200 - diam. 900

GE Äkta Explorer FPLC 100 Air/General Electric/Cytiva -Box 900 -pH/C 900 monitor -UV 900 UV Detector -UV Flow Cell -P 900 Pump /100ml/min w. Switch Valves Air 900 Control Box -pH Sample -Conductivity Cell -INV 907 Injection V1 Sample Valve V5 Outlet Valve V4 Column Valve V2 Column Valve V 3 -P 960 -M 925 MIxer (2ml) on request 5 and 12 ml) FR 902 Restrictor CU-950 Interface Unicorn Software -Frac 950 Faction Collector warranty