deckel 1 used for sale

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 190 mm -Type: 40-14M-55 -Pitch: 14 mm / strap width approx. 55 mm -Receptacle: Taper clamping bushing: Tecnamic 2517-40 Ø 40 x 45 mm -Dimensions: Ø 190 x 70 mm -Weight: 8.7 kg

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 160 mm -Type: 34-14M-85 - Pitch: 14 mm / belt width approx. 85 mm -Receptacle: Taper clamping bushing optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 160 x 100 mm -Weight: 7.5 kg

Rail wheel, flanged wheel, roller, track wheel, wagon wheel, roller -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange 130 mm, see photos -Hole: Ø 30 mm -Dimensions: see photos -Quantity: 124 rolls available -Price: per piece -Overall dimensions: Ø 160 x 45 mm -Weight: 3.3 kg/pc.

rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 15 teeth -Diameter: 197 mm -Shaft mounting: Inner Ø 60 x 163 mm -Bolt circle: Ø 94 mm M12 -Dimensions: see photos -Overall dimensions: Ø 197 x 163 mm -Weight: 15.7 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Donaldson, air filter type P 10-1234 in original packaging -Quantity: 5x air filters available -Price per piece -Dimensions packaging: 260/260/H285 mm -Weight: 1.8 kg/pc.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Donaldson, Air filter type SMP 18 1045 Ovp -Number: 8 air filters included -Price: per piece -Packaging dimensions: 265/265/H280 mm -Weight: 1.8 kg/pc.

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A -Type: 6SN1123-1AA00-0CA0 -Spindle module: Type 6SN1135-1BA12-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.7 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A -Type: 6SN1123-1AA00-0BA0 -Feed module: Type 6SN1130-1AE11-OABO -Dimensions: 290/50/H480 mm -Weight: 5.2 kg

Container, granule container, storage tank, powder container, storage tank, color powder container -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg

Sensor-actuator distributor, distribution strip, distribution box, HV distributor, HV distributor -Manufacturer: Escherich, High Voltage Distributor -Type: 100082 (ES108) HVD-05 -Quantity: 2x distribution block available -Price per piece -Dimension: 130/120/H50 mm -Weight: 0.5 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m -Roll width: 1200 mm -Roller diameter: 83 mm -Roller spacing: 200 mm -Dimensions: 3600/1220/H265 mm -Weight: 206 kg

Gears, spur gears, angular gears, worm gears -Gear: Worm gear, unfortunately unused without type designation -Translation: i = 40 -Hollow shaft: Ø 11 x 23 mm / 14 x 67 mm -Hole circle: Ø 87 x 9 mm -Quantity: 3x gears available -Price per piece -Dimension: 100/100/H115 mm -Weight: 1.2 kg

Moving steady rest, moving steady rest, steady rest, lynette -Bezel: pneumatically tensioning, self-centering -Type: SLK 087-1070/3 -Rollers: cylindrical -Dimensions/clamping range: see photos -Dimensions: 365/225/H370 mm -Weight: 43kg

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, vibration dampers, spring elements -Manufacturer: Stop Choc, vibration damper 3 pieces, for machine tools and systems -Type:V 45-WH Ø 145 mm -Height: 240 mm -Price: complete -Weight: 3.2kg/piece

PLC control, digital input, digital input, input module -Manufacturer: Schleicher, digital input Digital Input 24VDC -Type: UBE 24V 10D 31406792 -Quantity: 3x module available -Price per piece -Dimensions: 150/35/H200 mm -Weight: 0.5 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg

Line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Murr Elektronik, mains filter mains suppression filter 3-phase -Type: 10375 -Quantity: 1x filter available -Dimensions: 250/150/H65 mm -Weight: 3.4 kg

Time relay, safety time relay, safety control, timer, timer -Manufacturer: Grässlin, timer unused in original packaging -Type: talento 121 01.28.0003.1 -Voltage: 220-240V / 50Hz -Quantity: 5x timer available -Price per piece -Dimensions of box: 95/60/H85 mm -Weight: 0.2 kg/pc.

Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø16 x 210 mm -Dimensions: 265/100/H95 mm -Weight: 3.1 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg

Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive motor -Roll width: 1160 mm -Rollers: Ø 90 mm -Roller spacing/axle distance: 200 mm, 2 wheels are missing, see photos -Total length: 2.49 m -Transport dimensions: 2490/1230/H95 mm -Weight: 145 kg

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, guide cylinder type DFM-20-40-PA-GF 170843 -Piston: Ø 20 mm -Stroke: 40mm -Sliding guide -Quantity: 3x cylinders available -Price per piece -Dimension: 120/80/H60 mm -Weight: 1.1 kg/pc.

Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: Fumatech MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 60 mm -Hole circle: Ø 170 mm -Weight: 9.3 kg

Tool trolleys, workshop trolleys, mobile workshop trolleys, transport trolleys, table trolleys -Workshop trolley: Transport trolley made of aluminum, with drawer -Length: 1030mm -Width: 610mm -Height: 980mm -Swivel castors: 4 pieces, 2x with brakes -Weight: 24 kg

Linear drive, linear gearbox, lifting gear, spindle drive, linear unit, linear guide, linear axis, linear actuator -Manufacturer: Thomson, linear actuator Electrak E150 -Type: DF36-10W51-03L02MM -Dimension: 300/200/H110 mm -Weight: 2.2 kg

Compressed air filters, fine filters, filters, flange filters, compressed air microfilters -Manufacturer: Domnick Hunter, compressed air filter -Type: unfortunately no exact type designation -Dimensions: see photos -Dimensions: 270/150/H495 mm -Weight: 7 kg

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: Festo, input module -Type: CP-E16-M12X2 -Item no.: 18206 -Quantity: 1x modules available -Dimension: 145/80/H55 mm -Weight: 0.5 kg

mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm -Depth: 800mm -Height: 840mm -Weight: 56 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg

Mounting rails, sliding set, pipe clamps, pipe fastening, pipe clamp bracket -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS CC-2G-PL 191711 -Quantity: 11x sliding set available -Price: per piece -Dimensions: 150/130/H50 mm -Weight: 0.7 kg/pc.

Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS -Quantity: 22x sliding kit available -Price per piece -Dimension: 275/190/H55 mm -Weight: 1.8 kg/pc.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fasteners: roof hooks, -Dimensions: see photos -Quantity: 66 hooks available -Price per piece -Minimum order: 10 pieces. -Transport dimensions: 240/130/30 mm -Weight: 0.4 kg/pc.

Data light barrier, retro-reflective light barrier, light barrier, optical data transmission -Manufacturer: Lenze, optical data transmission data light barrier -Type: DDLS 200/120.2-10 -Voltage: 18-30V DC -Dimension: 190/85/H110 mm -Weight: 1.2 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, Hydraulic unit -Motor: VEM 7.5 kW / 1430 rpm -Individual components: Hydac Hawe Hoerbiger see photos -Dimensions: 860/320/H420 mm -Weight: 97 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 75 x 119 mm -Total length: 2505 mm / 3 x 835 mm -Total weight: 63.2 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 80 x 119 mm -Total length: 835 mm / 1x 400/200/100/50/40/20/15/10 mm each -Total weight: approx. 22 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 9 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 835 mm / 1x 400/170/100/50/40/30/20/15/10 mm each -Total weight: 11 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: BHC WEB, capacitor 1000 µF -Type: 55/085/56 LL ALS20A 102 KD 250 -Quantity: 1x contactor available -Dimension: 95/70/H110 mm -Weight: 0.3 kg

Servomotor, actuator, air flap servomotor, geared motor -Manufacturer: ELVI, actuator -Servomotor: Type 100605 -Voltage: 24V -Quantity: 3x drive available -Price per piece -Dimension: 190/110/H125 mm -Weight: 1.6 kg/pc.

Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

Workbench, work table, assembly bench -Workbench: with drawers/cabinet door, solid design -Width: 1240mm -Depth: 700mm -Height: 850mm -Drawers: 3 -Cabinet door: 1 -Weight: 102 kg