130,803 used machines on RESALE, but how to find them? Machine Search
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm -Socket: Ø 30 mm -Weight: 5.8 kg
Folding carton machine from service with up to 140 cycles and lowerable conveyor for double packaging
Liebherr slide-in gearbox from old stock ! As good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745
This geared motor is manufactured by Muller Martini Weiterverarbeitungsmaschinen, under item no. 3672.1797.2. The price is CH 3000.- at Muller Martini.
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 83 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -with: electrical separation coupling -Dimensions: 530/160/H230 mm -Weight: 23 kg
- old German quality, virtually indestructible. - Aluminum boiler - With steel lifting arm - without lid / protective grille - with age-related signs of wear and tear and Wear and tear see photos - Shell diameter 76 cm (inside) - Shell height: 44cm (inside) - Height: 114 cm (lowest position) - Width / Length: 99cm x 83cm - 380 volts
KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running Direction: Right – Left This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production ...
- CP 2000 (incl. ink remote control) - Preset Feeder - ALCOLOR dampening units - Technotrans Combi cooling device (water cooled) - ink temerature control - HEIDELBERG Autoplate - Standard Wash-up systems - GRAPHIX Alphatronic 200 - high pile delivery - Perfecting 2/0 or 1/1 - machine raised by 30 cm
KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running direction: left - right This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production vo ...
Klöckner-Moeller Track System BD O-100 A Klöckner-Moeller Busbar system BD O-100 A 500 V Track 160 cm 120 pieces 192 meters More items - new and used - can be found in our shop! International shipping costs on request!
Working width: 630 mm Working height: 3 - 250 mm Motor output: 7,5 kW Feed speed: 7 und 14 m/min. Dimensions (length / width): 2700 x 1700 mm weight: ca. 1.450 kg Dust suction hood: 2 x 160 mm COMBINED PLANNING AND THICKNESSING MACHINE 546|100 Manufacturer description Solid German mechanical engineering Convenient planing and thicknessing without machine conversion, dimensionally stable and precise dressing tables, as there is a folding up omitted, for planing widths up to 630 mm and dual operation up to 315 mm each PANHANS solid steel cutter block with 4 Tersa reversible knives SURFACE PLANE: Table length 2555 mm, planed with toothed table lips Electromotive adjustment of the feed table via button with digital display the chip removal max. 5 mm Dressing fence can be inclined up to 45°, in an extremely smooth-running steel guide stored Dressing ruler, anodised, with swiveling auxiliary ...
Three-phase motor, electric motor, gear motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 480/310/H320 mm -Weight: 52 kg
Cable shredder Manufacturer GEM Type TS 1000 Year of construction 05/2016 • CE certificate: TS 1000 • Slip No: PCCE 1036 • Pressure: 100 bar • 75 kW motor power • Weight: 10,200 KG • Rotation Number: 88/min • Rotor length: 1,000 mm • Rotor width: 450 mm • Hydraulic slider 1,400 mm • Rotor knife 50x50x30mm hardened DIN 2379 • Engine manufacturer Gama • Radiator manufacturer Yilmaz 87 revolutions / minutes • Electronics manufacturer Siemens and ABB PLC control panel • Hydraulic pneumatic sieve changing mechanics
Key data: 1550 KW, 1937 kVA
We currently offer: MTU generator set Engine MTU V12 4000 Generator Marelli Type: MJR 4582G220Z3 Power 1937 KVA / 1550 KW Hz 60 Volt 690 A 1623 1800 RPM Year of construction: 2011 Operating hours are low You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Currently we offer a: Cummins generator set Type: KTA 50-G3 Engine Cummins Generator Leroy was built in 2003 Power 1450 KVA Hz 50 Built in 1995 Hours 7700 Without control cabinet Transformer included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.
Centrifugal pump, water pump -Type plate: unfortunately not available -Delivery capacity: 20-50 m³/h -Max. H: 14-9 mWs -Motor power: 1.85 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection output: DN40 -Dimensions: 540/290/H310 mm -Weight: 49kg
Product number: 3040 Type: 3000/1100 MG Serial number: S107 Year of construction: 2004 Hole plate diameter: 11 inch, +/- 280 mm Mixer: 3000 litres, double paddle mixer Infeed height: 2500 mm Outfeed height: 760 mm Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 120kW Dimensions: 4000 x 2000 x 3200 mm Including tool trolley
Stainless steel couplings, pipe coupling -Type: FLEX 1L 114.3 -Inside: Ø 114.3 mm -From: 112.5 to: 116.0 mm -Pressure: 21 bar -Dimensions: 150/150/H95 mm -Weight: 1.1 kg
Bezel, setting stick, lynette -Max. passage: Ø 160 mm -Peak height: 220 mm -Edition: Gray cast iron -technical drawing included with the photos -Dimensions: 450/100/H500 mm -Weight: 33 kg
Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inner diameter: 114.3 mm -From: 113.0 to: 115.5 mm -Pressure: 16 bar -Price: per piece -Number: 14 available -Dimensions: 160/142/H100 mm -Weight: 1.6 kg/piece
Product numbe:r: 3041 Type: 3000/1100 MG Serial number: S106 Year of construction: 2004 Hole plate diameter: 11 inch, +/- 280 mm Mixer: 3000 litres, double paddle mixer Infeed height: 2500 mm Outfeed height: 760 mm Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 120kW Dimensions: 4000 x 2000 x 3200 mm Including tool trolley
Used matrix with a capacity of 1000 litres, acid-resistant design. Mixed cream or gel masses. Blade agitator - optional propeller agitator.
radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg
Used Chain Conveyor Belt Manufacturer: BOA Type: 1500 HG 29°HTK 11770 Year of Make: 1997 Technical data of the chain belt conveyor belt: Drive power 3 kW Length of feed belt 650 mm Length of climbing strap 10770 mm Inclination: 29° Usable width 1400 mm Height of drive axle above ground 4,260 mm Height of sidewall riser strap, inside 800 mm
Three-phase motor, electric motor -Power: 1.5kw -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 400/270/H220 mm -Weight: 24kg
Key data: 1250 mm, 900 mm, 8000 mm
The largest diameter of the processed product in mm: above the bed 1250 above the caliper 900 Distance between centers in mm 8300 The largest weight of the installed product in kg is 30,000 The number of spindle speeds is 3 The limits of the number of revolutions of the spindle in minutes are 3.15—200 Number of pitches: longitudinal 18 transverse 18 Feed limits in mm/rev: longitudinal 0.16-8 transverse 0.1-5 Number of calipers 2 The angle of rotation of the upper part of the caliper is ±90 degrees The power of the main electric motor is 60 kW Dimensions of the machine (length X width X height) in mm 15200X2500X2060 Weight 53.4 tons
Offer 24331 Specifications: - Table surface 1700 x 550 mm - Manual travels X / Y 1300 x 500 mm - Drill Fabr. MAXION , Type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drilling spindle holder MK 2 - Drilling spindle stroke with drilling depth fine adjustment 76 mm - PV 12 pneumatic feed unit - Projection 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm -Mot. Drilling unit stroke -Mot. Table clamping x + y - Minimum amounts of lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg
Panasonic Inverter U-100PE1E8A Air Conditioner Outdoor Unit with 2 Pcs Panasonic S-50PU2E5A 4-Way Ceiling Cassette for Cold and Heat Cooling power: 10 kW Heating power: 11.2 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314
Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Siemens: Sinamics S120 Single Motor Module 6SL3120-1TE21-0AA3 -Max. Power kW -Input: DC 600V -Output: 3AC 400V 9A -Quantity: 1 piece available -Dimensions: 500/50/H270 mm -Weight: 5.0kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Brake -Dimensions: 540/220/H230 mm -Weight: 22 kg
Dosing bunker with chain belt discharge Manufacturer: HUBER Fördertechnik Type: RHKG160/8AA Year of Make: 2001 specifications: Machine dimensions: Length: 8,500 mm, Width: 2,400 mm, Height: 2,500 mm Center distance: approx. 8,000 mm Conveyor width: 1,600 mm Side wall height: approx. 1,550 mm Capacity: approx. 20 m³ Drive power: 0.75 kW for the conveyor belt Drive power: 4.0 kW for the dosing station
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 18 rpm -Power: 0.37kw -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 490/261/H300 mm -Weight: 38kg
Cross-cut line Opticut 150 -4 4 ejections built in 2004
completely stainless steel Track width 800 mm 2 engines "JVM GmbH & Co.KG", type JV 156-250 Opening grille: dia. 14-22 mm Power: 2 x 0.95 kW Dimensions : ± 2,700 x 1,600 x 1,000 mm
Caterpillar C4.4 - Unused - 110 kW - JKT
centrifugal pump, water pump -Flow rate: 5-42 m³/h -Motor power: 0.75 kW -Speed: 1410 rpm -Inlet pipe connection: DN50 -Pipe connection outlet: DN50 - Quantity: 1 pieces -Dimensions: 570/230/H310 mm -Weight: 40kg
Tailstock, counter bearing for dividing head, dividing head -Peak height: 135 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 220/120/H140 mm -Weight: 11.4 kg
Key data: 2000 mm, 4 mm, 650 mm
Machine Type: Guillotine Shears Manufacturer: Stückmann & Hillen Type: 125.07-4 Year of manufacture: coming soon Condition: used / in working order Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-STÜ-1024 DESCRIPTION We offer you a used guillotine shears from the manufacturer Stückmann & Hillen. Specifications Cutting capacity sheet steel 2000x4mm Weight approx. 3.8t Incl. spare blade (unsharpened) Available from the beginning of December. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
Log band saw Canali Braun 1600 round timber feed wagon saw roller conveyor year of construction.1994 new control
Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer
Used machine in good condition. Available for immediate delivery. - Power source : 80 kVA - Axes: 5 - Control: SIEMENS 840D
proximity switch -Manufacturer: Festo -Product Type: 150 857 U613 -Number: 3x switches available -Price/Sale: complete -Weight: 0.01 kg/piece
Used machine in good condition. Available for immediate delivery. - Control: SINUMERIK 880 T 3 - Max. length: 400 mm - Tool-holder cone: CONO ISO 50 - Tool magazine capacity: 16 #
Used machine in good condition. Available for immediate delivery. - Power source : 70 kVA - Control: SINUMERIK 880M - Driven tool speed: 6.000 rpm
Transformer, transformer, converter, three-phase autotransformer -the transformers come from a UV paint drying facility -Input: 400 V -Output: -(technical data see photos) -Number: 8x transformer available -Price: per piece -Dimensions: 160/180/H195 mm -Weight: 14 kg/piece
Transformer, converter, inverter, three-phase autotransformer -The transformers come from a UV paint drying process -Input: 380 V -Exit: -Technical specifications: see photos -Number: 6x transformer available -Price: per piece -Dimensions: 160/180/H195 mm -Weight: 14 kg/piece
maximum number of results exceeded
please refine your search
