134,083 used machines on RESALE, but how to find them? Machine Search
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Throughout: Ø 46 mm -Weight: 9 kg
Comexi solvent-free laminating system Coating width = 1320 mm , Speed = 350 m/min, With 2 unwinders (turnstile) With 1 rewinder (turnstile) With Doypag vario mixer. Mixing plant 4 heaters Pre-treatment AFS corona type. G 60 S,
Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator -kicker -Counter -pre breaker without electronic gluesystem
Stop magnet, pull magnet, opening magnet, stop magnet, locking unit -Manufacturer: Thomas/Sauer gear -Type: 82-5650-106700 -for: Sauer gear -Type: WE10J402F1E0D220 -Connection: 220 volts -Stroke: 12 mm -Number: 1x available -Price: per piece -Dimensions: 115/210/H145 mm -Weight: 7 kg
MEWA UG 1007 MS Power 160 kW Condition: used in need of repair Rotor blades: 25 pieces Stator knives: 10 pieces incl. hopper with pusher Switchboard Discharge chute Hydraulic Screen lifter Very few hours of operation. The machine has been unused for several years. Total weight approx. 15 t Delivery time : immediately
max. ram stroke: 230 mm throat: 230 mm table diameter: 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lippert belt conveyor GF 19100-750-600 RA2247 Technical data: Conveyor length (NL): 19100 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 19100 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m ...
Stick electrodes 4.0 x 450 -Type: Phoenix 120K -Price: per package -Number: 9 packages available -Weight per package: 5.9 kg
Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 16 mm -Total length: 250 mm -Total length extended: 330 mm -Price: per piece -Number: 2x available -Dimensions: 56/56/H250 mm -Weight: 1.5 kg/piece
Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston diameter: 38 mm -Piston rod: 20 mm -Total length: 305 mm -Total length extended: 425 mm -Price: per piece -Number: 10x available -Dimensions: 80/80/H305 mm -Weight: 2.9 kg/piece
Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg
PLC control, electronic module -Type: Simatic S7 6ES7 314-1AE01-0AB0 -Number: 1 pieces available (photos) -Price: complete -Weight: 2.2 kg
Lippert belt conveyor GF 18000-770-650 RA2246 Technical data: Conveyor length (NL): 18000 mm frame width (NB): 770 mm belt width (GuB): 650 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 18000 Nominal / outside width in mm: 770 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m ...
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 nominal voltage: 230, 380-500V Conveying length in mm: 2400 Nominal / outside width in mm: 1300 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SE ...
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from: a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg
Centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. Delivery rate: 2.0 m³/h -Max. H: 14.5 m -Motor power: 1.97 kW -Speed: 2840 rpm -Quantity: 1 piece available -Dimensions: 380/205/H285 mm -Weight: 33kg/
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
Schember Wagge max. 150kg with base, shipping possible
Recon Part number: 554 050 02 01 554 050 00 01 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 55 mm -Weight: 11 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm -Through hole: Ø 37 mm -Weight: 3 kg
Flour scales BÜHLER MWBL-EE in various sizes from 60 to 170 The precise electronic weighing system for in-house product control. Continuous scales for actual weight recording. Weighing capacity from 0.1 to 50 m³/h. In the case of flour, this corresponds to an output of up to 23 t/h. Control Sumtronic II MWEE Modernization of the control system on MEAG possible. If required, with dosing cell wheel. The systems can also be used for other bulk materials. Simply enquire and explain your requirements to our expert consultants. We will work with you to find a cost-effective solution.
Recon Part number: 554 050 03 01 554 051 01 01 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 195 mm -Passage: Ø 61 mm -Weight: 11 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 165 mm -Passage: Ø 47 mm -Weight: 7 kg
Window transport trolleys, sash transport trolleys, platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Intermediate dimension: mm -Heavy load: transport trolley -Number: 1 piece car available -Price: per piece -External dimensions: 1775/640/H1800 mm -Own weight: 144 kg
Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...
Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 160 mm -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg
Servo drives from Indramat KDS 1.1-100-300-W1
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!
Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach radius: 3.2m Handling Weight: 130kg Year of construction: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator. Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach Radius: 3.2m Handling weight: 130kg Year of manufacture: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator.
Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate, straightening bench ... -Number: 1 prism available -Dimensions: 100/120/H60 mm -Weight: 5 kg
Indramat Power Supply-----Power supply Type CO 1.3-100-220
used
Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified
Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
150 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6 m Depth 110 cm, blue Beam length 2.7 m orange Rack with ballast /compartment 3050 kg Negotiation price: € 18.990,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 110 cm, height 6 m +216 pcs. beam, length 2.7 m, 3050 kg ballast/compartment +432 pcs. Suspension locks +220 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
Recon Part number: 526 050 00 01 X52605100017 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
electric motor, three-phase motor -Power: 0.37 kW -Speed: 2730 rpm -Shaft: Ø 12 x 35 mm -Design: B5 -Protection class: IP 54 -Dimensions: 275/165/H220 mm -Weight: 7.4 kg
electric motor, three-phase motor -Power: 1.1 kW -Speed: 2845 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 55 -Quantity: 1x available -Price: per piece -Dimensions: 275/156/H195 mm -Weight: 9.6 kg
x-travel: 1600 mm y-travel: 900 mm z-travel: 800 mm Control: Heidenhein iTNC table-size: 1700x850 mm taper ISO: ISO 40 turning speeds: 10000 U/min workpiece: Random 30 pos. table weight: 2000 Kg rapid traverse:: 20 m/min Internal cooling system: 20 bar total power requirement: 18 kW weight of the machine ca.: 18600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
INDRAMAT Permanent Magnet Three-phase Servo Motor
INDRAMAT Permanent Magnet Three-phase Servo Motor
INDRAMAT Permanent Magnet Three-phase Servo Motor
maximum number of results exceeded
please refine your search
