deck used for sale

Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

2002 Deckel Maho DMU 50T still in use, can be viewed Find more here - .ucymachines/ Contact us at - sales@ucymachines

The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

Clamping plate, clamping table, machine table, T-slot plate LID Working surface: 700 x 250 mm for KF12 Plate thickness: 60 mm groove width: 12 / 21 mm used, tested ! Dimensions: 700 x 250 x 60 mm

Cover FP42NC 2387 X-Axis Ball Screw with Nut new! Number according to spare parts plan: 2388-002435 Shipping by arrangement

Clamping plate, clamping table, machine table LID Working area: 600 x 430 mm for KF12 Panel thickness: 25 mm Groove width: 12 / 21 mm used ! Dimensions: 600 x 430 x 60 mm

Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!

Deckel FP NC Measuring Microscope Hensold Wetzlar MZM30 with SK40 DIN Cone with Gripper Groove

Key data: 1200 mm, 600 mm, 500 mm

Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.

Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool diameter: mm sanding disc diameter: mm Motor output: 3 kW total power requirement: 3 kw Weight: 1.400 kg Overall size: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

1 pcs used tool milling machine Make of lid Model FP 3 A Control Dialog 11 Technical data: Travel X,Y,Z 400,300,400 mm Clamping area 700 x 400 mm Quill stroke 80 mm Spindle drive 3kW Speed 3150 rpm Spindle holder SK 40 Machine dimensions L x W x H 2400/2200/1900 mm Machine weight approx. 2500 kg, Accessories: Grundig Dialog 11, fixed angle table, electronic handwheel, documentation Errors of technical data and prior sale excepted

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mm B-axis: 0 - 161,955 ° C-axis: 360 ° spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/min spindle power: max. 35 kW max. torque on the spindle: max. 130 Nm feeds -stepless-: bis 20.000 mm/min rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min rapid traverse B-axis: 40 U/min C-axis rapid feed: 50 U/min no. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 40 bar total power requirement: 52 kVA weight of the machine ca.: 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device The data for this ad was created with ModulMWS - the  ...

turning speed range - grinding spindle: 4500 U/min max diameter of the vice bore: 17,5 mm max. radius to grind: max. 10 mm max. lateral adjust. of milling cutter: 10 max. longitudinal adjust. of milling cutter: 40 max. angle for relief grinding: 45 Grad weight of the machine ca.: 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 40 - 2000 U/min feeds: 5 - 500 mm/min rapid traverse: 1,2 m/min total power requirement: 1,9 kW weight of the machine ca.: 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid-sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the box are first closed, only then is the box glued. Carton formats: Length 150 – 600 mm Width 115 – 490 mm Height: 110 – 510 mm Specifications: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: In addition to our VOGEL carton seamer range, we offer track rollers, leading and trailing tables, roller conveyors.

x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 660 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: SIEMENS 840 C total power requirement: 12 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm Control: CNC total power requirement: 13 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 450 mm z-travel: 150 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital Travel paths X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Vise, hydraulic Refurbished in 2019

Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor

Tool holder ISO 40, travel distances 800 x 300 x 400, 18 spindle speeds 40 - 2000, 18 feeds 10 - 500, rapid traverse, spindle motor 2.2 kW, Spindle backlash X-axis 0.3 mm, Y-axis 0.2 mm Bellows in X and Z axis new

x-travel: 630 mm y-travel: 800 mm z-travel: 750 mm control: SIN 840D sl Siemens B - axis: 360 x 0,001 ° A - axis: -200 -- +25 x 0,001 ° spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 100 % load: 28,00 kW power capacity at 40 % load: 34,00 KW max. torque at 40% / 100% load: 110 / 84 Nm tool taper: HSK 63 feed X/Y/Z/-axis: 1 - 100.000 mm/min rapid traverse X/Y/Z: 100,00 m/min feed capacity X/Y/Z: 9 / 6 / 9 kN feed B-axis: 1 - 14.400 °/min feed A-axis: 1 - 7.200 °/min size of pallet: 2x 500 x 500 mm workpiece weight max.: 400 kg max. workpiece diameter: 800 mm workpiece height max.: 800 mm tool magacine with: 63 diameter of tools max.: 280 mm tool length - max.: 550 mm weight of tools max.: 15,00 kg total power requirement: 65,00 kW weight of the machine ca.: 14,00 t dimensions of the machine ca.: 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERI ...

x-travel: 350 mm y-travel: 150 mm z-travel: 340 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 40 - 2000 U/min feeds: 5 - 500 mm/min rapid traverse: 1,2 m/min total power requirement: 1,9 kW weight of the machine ca.: 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 150 mm, 300 mm

Universal Milling DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Milling machine DECKEL FP3 - 500x300x400 mm, DRO, Information about technical data are not binding., Machine available subject to prior sale, Working table size: 800x420 mm, Longitudinal travel x axis: 500 mm, Cross travel y axis: 300 mm, Vertical travel z axis: 400 mm, Spindle taper: 40 SK, Spindle speed: 40 - 2000 rpm, Number of spindle speeds: 18, Spindle motor power: 3 Kw, Quill spindle travel: 100 mm, Working feed x-z axes: 5 - 500 mm/1, Rapid feed x-z axes: 1.500 mm/1, Number of working feeds: 18, Weight: 1.200 Kg

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 40 % load: 28,00 kW power capacity at 100 % load: 19,00 kW max. torque on the spindle: 121 / 82 Nm spindle taper: HSK-A63 B-axis: -10 - +180 ° c-axis: 360 x 0,001 ° feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed B-axis: 1 - 10.800 °/min rapid traverse B-axis: 30,00 U/min size of pallet: 800 x 630 mm max. workpiece diameter: 800 mm workpiece height max.: 1.330 mm table load: 1,20 t toolpiece magazine: chain magazine: 180 Stück tool diameter: 80 mm tool diameter with 2 vacant positions: 160 mm tool length - max.: 450 mm weight of tools max.: 15,00 kg total power requirement: 57,00 kW weight of the machine ca.: 22,00 t dimensions of the machine ca.: 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik ...

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. tool milling machine directly from one resolutionMilling machine DECKEL type FP 4Masch. No. 1/0687 Year of construction 1978Travel X: 700 mm, Y: 400 mm, Z: 450 mmTable clamping surface 860 x 500 mmSpindle holder SK 40 - M16Spindle speed 31.5 - 1600 rpm. 18 stepsQuill displacement horizontal and verticalMain spindle drive 4 kWNet connection 380 volts, 50 Hz- Digital display 3-axis HEIDENHAIN- Universal swivel-tilt turntable- Coolant device in the machine base- Machine vice- none

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x