deck oven used for sale

Control: Deckel Dialog 11, with vice, an inspection is possible.

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

Controls: Deckel DIALOG 11E, tools are available, number of operational hours unknown, was maintained regularly, an inspection is possible.

Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.

X-travel: 560mm, y-travel: 500, z-travel: 450mm, rotational speed: 40-4000/min, connected load: 16.5VA, control: Contour 3, weight: 2.7t +295kg control cabinet, spindle y-axis defective, fourth axis defective, on-site inspection is possible.

Control system: Contour 2 lid, the machine has no operating hours counter, the control system parameters must be reloaded onto the machine, the buffer battery is empty, an on-site inspection is possible.

Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced.

Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced.

Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible.

Control system: CNC532, axes: 3, operating hours: 19565h, travel X/Y/Z: 600mm/400mm/500mm.

Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.

The machine is in good condition and can be inspected under power by appointment. Specifications: X: 500 mm Y: 300 mm Z: 380 mm Milling spindle by hand: 100 mm 18 spindle speeds: 40 - 2000 rpm 18 feeds X, Y, Z: 10 - 500 mm/min Rapid response: 1500 mm/min Clamping surface angle table horizontal: 700 x 320 mm Motor: 3 kW, 1420 rpm Dimensions approx.: 1500 x 1500 x 1800 mm Weight: approx. 1.5 t

Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal dimensions of work bowl X/Y/Z: 845mm/635mm/340mm, max. filling height:: 300mm, max. workpiece height: 260mm. Documentation available. On-site inspection is possible.

MAschinen Details Warehouse number 1105-03470 Machine Type Machining Center - Vertical Make DMG DECKEL MAHO Type DMF 180 linear Year of construction 2012 Control type CNC Control SIEMENS 840 D Storage location FRANCE Country of origin Germany Delivery time 1 month after order Freight base from location Technical details x-path 1800 mm y-way 700 mm z-way 700 mm Control SIEMENS 840 D 840 D Table clamping surface 2600 x 600 mm Table load 2 t Speed 18000 rpm Recording ISO SK 40 Tool changing device 30-fold Rapid speed 50 m/min Operating hours 53000 h Spindle hours 13500 h Total power requirement 36 kVA Machine weight approx. 11 t Space requirement approx. 4.40 x 2.45 x 2.65 m Information LID MAHO DMG DMF 180 Linear Equipment direct path measuring system RIGID TABLE WITH INTEGRATED RUNNING TABLE D.750 MM CENTRALLY ARRANGED NICT WITH IKZ 600 liters 40 bar PAPER ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 350 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y axis): 300 mm Vertical travel (z axis): 380 mm Distance from vertical spindle to table: 470 mm Spindle speeds: number (steps): 18 from: 40 rpm up to: 2000 rpm Taper in spindle CN: 40 Feeds steps:: 18 longitudinal from: 10.0 mm/min up to: 500 mm/min transversal from: 10.0 mm/min up to: 500 mm/min vertical from: 10.0 mm/min up to: 500 mm/min Vertical quill travel: 100 mm Rapid traverse: longitudinal: 1.5 m/min transversal: 1.5 m/min vertical: 1.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 4.0 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 2200 mm Width: 1800 mm Height: 2000 mm Various accessories: Digital readout number of axis:: ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: DECKEL DIALOG 3 Technical data Table length: 632 mm Table width: 277 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Distance from vertical spindle to table: 93 - 525 mm Distance from spindle axis Spindle speeds: number (steps): 21 vertical from: 31.5 rpm up to: 3150 rpm Feeds: stepless longitudinal from: 2 mm/min up to: 2000 mm/min transversal from: 2 mm/min up to: 2000 mm/min vertical from: 2 mm/min up to: 2000 mm/min Rapid traverse:: 4 m/min Vertical quill travel: 60 mm Stroke of horizontal spindle: 65 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 1.6 / 2 kW Machine´s weight about: 1215 kg Overall dimensions machine: Len ...

DMG Deckel Maho DMU 60T X: 630 - Y: 560 - Z: 560 mm Max longitudinal travel X-axe: 630 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 560 mm Power on spindle: 10/15 kW Admission in millinghead: SK 40 Spindlespeeds: 20 > 12 000 rpm Table size: 1000 x 600 mm Control: Heidenhain Length: 2800 mm Depth : 3490 mm Height: 2220 mm Weight: 7 ton Toolholder: yes Number of tools: 24 tools

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. milling cutter diameter: 0.5 mm Max. milling cutter diameter: 17.5 mm Max. radius to grind: 10 mm Collet drill: 17.5 mm Relief grinding angle max.: 45 ° Grinding wheel speeds fix: 4500 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 0.55 kW Machine´s weight about: 125 kg Overall dimensions machine: Length: 660 mm Width: 570 mm Height: 1400 mm Various accessories: Lamp Set of collets Cast-iron base

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. milling cutter diameter: 0.5 mm Max. milling cutter diameter: 17.5 mm Max. radius to grind: 10 mm Collet drill: 17.5 mm Relief grinding angle max.: 45 ° Grinding wheel speeds fix: 4500 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 0.55 kW Machine´s weight about: 125 kg Overall dimensions machine: Length: 660 mm Width: 570 mm Height: 1400 mm

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 50 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° horizontal: 360 ° vertical: 220 ° number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

Item no. 5032: 1 gebr. Universal tool milling machine Fabr. DECKEL, type FP 2 active, Bauj. 1981 with 3-axis active digital display Heidenhain Arb.-Ber.: 400 x 220 x 400 mm, drive power: 2 kW Accessories: Rigid table 700 x 330 mm Foldable splash guard cover with chip trap tray Machine feet, Documentation Other: Spindle holder SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to For further data, please refer to the attached data sheets

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

DECKEL S11, universal tool & cutter grinder, with microscope and screen, under power in our warehouse (see video), Mimu machine-tools (Italy)

Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm tool taper: SK 40 fixed table: 400 x 1000 mm addition table: 260 x 1000 mm turning speed range: 40 - 2000 U/min feed range: 10 - 500 mm/min total power requirement: 3 kW weight of the machine ca.: 2000 kg dimensions of the machine ca.: 1775/1880/1850 mm • fixed angle table, • 3-axis-digital display ACU-RITE • 5 tool tapers, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Lid Type: FP 4 MA Year Built:1987 Control: Contour 2 control Working area: 485 x 385 x 380 mm Feed speed: 1-3000 mm/min Pinole stroke: 80 mm Main drive: 4 kW Number of rotating pins: 18 Spindle speeds: 63...3150 min Tool holder: SK 40 Table load: 600 kg Weight: approx. 1850 kg Dimensions without control panel: 2000 x 2400 x 2000 mm We will be happy to send you further information and pictures on request.

Key data: 800 , 600 , 550

Manufacturer: Lid Type: FP 5 CC Year of construction: approx. 1986 Table: 1500 x 675 mm Longitudinal path: (X,Y,Z axis) 1200x600x500mm Tool changer: no Tool holder: SK 40 Vertical spindle speeds: 20-6300rpm Feeds: 2-5000mm/min Connection: 50 Hz 3x 380V Spindle motor: 7.5KW Machine weight: approx. 8200kg Dimensions: 3300x2400x2400mm

Technical data Table length: 1000 mm Table width: 700 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y axis): 300 mm Vertical travel (z axis): 400 mm Travel of the upper slide: 100 mm Spindle speeds: number (steps): 18 from: 40 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 18 longitudinal from: 10.0 mm/min up to: 500 mm/min transversal from: 10.0 mm/min up to: 500 mm/min vertical from: 10.0 mm/min up to: 500 mm/min Vertical quill travel: 50 mm Rapid traverse: longitudinal: 1.5 m/min transversal: 1.5 m/min vertical: 1.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 4.0 HP Machine´s weight about: 2400 kg Overall dimensions machine: Length: 1500 mm Width: 1200 mm Height: 1800 mm Various accessories: Vice: width Digital readout number of axis:: 3 Manufacturer: HEIDENHAIN Coolant system Rigide table Vertical milling head Quick drill and milling head Angular m ...

Table length: 750 mm Table width: 460 mm Longitudinal X: 400 mm Cross Y: 400 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11

Table length: 1000 mm Table width: 600 mm Longitudinal X: 630 mm Cross Y: 560 mm Vertical Z: 560 mm Positions ATC: 24   CNC Brand: Heidenhain CNC Model: TNC 430 SPECIFICATIONS X - Travel  630 mm Y - Travel  560 mm Z - Travel  560 mm Controll  HeidenHain TNC 430 Table Length x Width  1000 x 600 mm Table load in kG  500 Kg Spindle Taper   Sk40 / HSK 63kW power on spindle    9 / 13 kW Spindle speeds / ranges   18.000 Rpm ATC tool changer  12 + 12 = 24 x Coolant true spindle / Bar   17 Bar Bar Number off controlled axis   3 + 1 B Axis

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: SK 40 SPECIFICATIONS X - Travel  500 mm Y - Travel  400 mm Z - Travel  400 mm bed / plano / portal / moving columnVMC Controll  TNC 124 Table Length x Width  700 x 500 mm Table load in kG  200 Kg Spindle Taper   Sk 40kW power on spindle   9 kW Spindle speeds / ranges  4500 Rpm  

Table length: 0 mm Table width: 0 mm Longitudinal X: 630 mm Cross Y: 560 mm Vertical Z: 560 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 430 SPECIFICATIONS X - Travel  630 mm Y - Travel  560 mm Z - Travel  560 mm Controll  TNC 430 Spindle Taper  Bt 40 Spindle speeds / ranges  20 - 18000 Rpm ATC tool changer  Bt 40 & Hsk 63  

Table length: 2600 mm Table width: 600 mm Longitudinal X: 2200 mm Cross Y: 560 mm Vertical Z: 720 mm Positions ATC: 30   CNC Brand: Siemens CNC Model: 840 D Power Line SPECIFICATIES Verplaatsing   X - as  2200 mm Verplaatsing   Y - as   560 mm Verplaatsing Z - as  720 mm Type bed freezer - bed / vloer / portaal  5 Axis VMC Besturing   Siemens 840D Power Line Tafel afmeting lengte x breedte   2600x 600 mm Tafel belasting in Kg   3500 Kg Spindel opname Iso   iso 40 Toeren - Snelheden - Stappen   8500 Rpm Gereedschap wisselaar   30 Koeling door spil in Bar  17 Bar Aantal gestuurde assen   3 + 2 Axis Kop indexeerbaar B en of C en hoeveel ˚graden  A + B Axis rotary table

Table length: 800 mm Table width: 400 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Make Deckel FP4M Type FP 4 M Year 1984 Conventionel high quality milling machine Table length (mm)L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 500 Cross Y (mm)Y = 400 Vertical Z (mm)Z = 400 Sk40 / 80 / 2500 Rpm SONY 3 axis droLittle used

Table length: 800 mm Table width: 500 mm Longitudinal X: 600 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11 Make Deckel FP4 CC Type FP 4 CC Year 1988 Dialog 11 Table length (mm)L = 800 Table width (mm)W = 500 Longitudinal X (mm)X = 600 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 Sk40 / 80 / 6300 Rpm High class machine !  

Power: 100 kW X - axis: 300 mm Y - axis: 400 mm Number laser heads: 0   CNC Brand: _Unknown / Other CNC Model: Lasersoft 3 D Make Deckel Maho Type DML 40 S Year 2001 LASERSOFT 3D - 6 Axis Table length (mm)L = 400 Table width (mm)W = 300 Longitudinal X (mm)X = 300 Cross Y (mm)Y = 400 Vertical Z (mm)Z = 500 Laser 100 W3 Mechanical axis 3 Optical Axis- Automatic repositioning - DECKEL MAHO LASERSOFT 3 D - Direct 3 D Autocad import - Filigran Kavitaeten 0.04 mm - Keramik machining possible - Vertical machining possible - Dimensions - Length : 3.500 - Width : 3.000 - Height : 2.000 - Weight : 2.200

Table length: 800 mm Table width: 400 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Make Deckel FP4M Type FP 4 M Year 1987 Aktive digitaal Table length (mm)L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 500 Cross Y (mm)Y = 400 Vertical Z (mm)Z = 400 Sk 40 / 2500 Rpm 3 Axis HeidenHain  

Machine Details Warehouse number 1105-03530 Machine Type Machining Center - Vertical Make DECKEL MAHO Type DMC 103 V Year of construction 2000 Control type CNC Control HEINDENHAIN TNC 426 Storage location FRANCE Country of origin Germany Delivery time ON REQUEST Freight base freely loaded Trucks, from location Price Technical details x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control HEINDENHAIN TNC 426 Table clamping surface 1200 x 600 mm Table load 0.8 t Rapid traverse 30 m/min Speed range 8000 rpm Torque at the spindle 90 Nm Drive power - milling spindle 13 kW Number of tools in the magazine 24 pieces Tool holder SK 40 Information CNC HEIDENHEIN TNC 426 - electronic handwheel - Synchronized tapping - RS 232 interface

Table length: 800 mm Table width: 500 mm Longitudinal X: 630 mm Cross Y: 500 mm Vertical Z: 500 mm Positions ATC: 2   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 M with HR410 Handwheel Make Deckel Maho 63V Type DMC 63 V Year 2000 Vertical machining centre deckel maho dmc63v Table length (mm) L = 800 Table width (mm)W = 500 Longitudinal X (mm)X = 630 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 Bt40/8000/10kW ATC 24 Positions TNC 426 M with HR410 handwheel  

Table length: 3400 mm Table width: 600 mm Longitudinal X: 3000 mm Cross Y: 560 mm Vertical Z: 720 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D Make DMF 300 Linear Type Deckel Maho Year 2004 / 6300 H Dmf 300 linear Siemens 840D Table length (mm)L = 3.400 Table width (mm)W = 600 Longitudinal X (mm)X = 3.000 Cross Y (mm)Y = 560 Vertical Z (mm)Z = 720 CNC Siemens 840D Sk40/6.300 /35 kW ATC 30 Positions Chip conveyor Automatic Head 90 Gr. each 2.5 Gr  

Table length: 800 mm Table width: 500 mm Longitudinal X: 630 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: Heidenhain CNC Model: TNC 430 Make Deckel Maho 63 V Type Deckel Maho Year DMC 63 V Deckel maho DMC 63V TNC 430 Table length (mm) 800 Table width (mm) 500 Longitudinal X (mm)X = 630Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 CNC TNC 430 Iso 40 / 8000 / 10 kW ATC 24  Positions HeidenHain TNC 430  

Machine Details Warehouse number 1105-03531 Machine Type Machining Center - Vertical Make DMG DECKEL-MAHO Type DMC 64 V linear Year of construction 2002 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock Technical details x-travel 640 mm y-travel 600 mm z-travel 500 mm Table size 850 x 600 mm Spindle holder ISO 40 Speed range 0 - 12000 rpm Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 30 Information CNC control heidenhain tnc 530 30X SK 40 MAGAZINE ELECTRONIC HANDWHEEL MACHINE IN GOOD CONDITION WITH SPAENEFOERDERER

Tool changer for DMC60 U with 120 tools. . Probably also fits DMU 60P, 80P, DMU 125.

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm table surface area: 1250 x 700 mm NC-rotary table: integriert, 700 mmø spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min control: HEIDENHAIN control: TNC 430 feeds x/y/z -stepless: 20 - 15.000 mm/min rapid traverse: 30 m/min ATC: 32 (2 x 16) Pos tool diameter: 80 / 130 mm workpiece length: 315 mm weight of tools max.: 8 kg NC-rotary table - speed -: max. 15 U/min table load: 600 / 500 kg total power requirement: 60 kW weight of the machine ca.: 9,6 t = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290/300 mm y-travel: 160 mm z-travel: 330/340 mm engine output: 1,5/1,9 kW weight of the machine ca.: 0,7 t Optical condition: very good: Mechanic: very good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 Aktiv vertical milling head Sk 40: Sk 40 S 20x2 operating instruction: operating key: ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green Compliance with the Machinery Directive on request at extra cost (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acce ...

CNC machining center make DECKEL-MAHO type DMU 80 TBuilt in 1995Technical specifications:Table length: 1100 mmTable width: 650 mmLongitudinal path X axis: 800 mmCross travel Y axis: 650 mmVertical travel Z axis: 550 mmNumber of tools in the changer: 25Tool diameter: 80 mmMax. Tool length: 315 mmTool holder: ISO 40Spindle speed up to: 6300 rpm.Feed speed: 1 - 15000 mm / min.Rapid traverse: 15 m / min.Total power requirement: 29 kWWeight approx .: 5500 kgDimensions approx .: 3100 x 2300 x 2500 mmWith- large work table- electronic handwheel- HEIDENHAIN Millplus control- separate 4th controlled axis manufactured by Walther- chip conveyor- approx. 15 tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and ar ...

clamping diameter: max. 17,5 mm grinding spindle speed: 4500 U/min relief angle: max. 45 ° total power requirement: 0,55 kW weight of the machine ca.: 120 kg dimensions of machine L x W x H: 0,54 x 0,47 x 1,31 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engraving Cutter Fabr. DECKEL type SONMachine -No: 24196max. radius to be ground: 10 mmmax. lateral displacement of the cutter holders: 10 mmmax. Longitudinal displacement of the milling cutter holder: 40 mmmax. adjustable back grinding angle: 45 °Gr. bore of the collet: 17.5 mmSpeed of the grinding spindle: 4500 rpm.Drive power: 0.25 kWDimensions L x W x H: 500 x 420 x 1400 mmWeight approx .:67 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal engraving and copy milling machine make DECKEL type GK 21Machine -No: 56 974Worktable clamping surface: 200 x 350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools