deca used for sale

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg overhauled, ready to use

Used centrifuge Drive motor: 11 kW Type hydraulic: Replacement C11 - 40Z Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: 1.4571 Max. Density: 1.5 kg / dm³ Weight: 7200 kg completely overhauled, Stainless steel, ready for use

Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Semimobil (with base) Hydraulic: B/C 55-180 KE Speed performance: 1130/RPM Drum diameter: 1120 mm Drum wall thickness: 20 mm Drum material: ST52-3N Weight: 17,000 kg not ready for operation (major overhaul extra charge!)

Used centrifuge Speed performance: 3040 U/min Drum diameter: 552 mm Drum wall thickness: 12 mm Drum material: StE 460 Max. Density: 1.3 kg / dm³ Max. Item material temperature: 10 - 50°C Weight: approx. 5220 kg not ready for operation (major overhaul extra charge!)

25,000 bottles /h 0.7 and 0.5 l li - re

System: Used decanter / centrifuge Manufacturer: Baker Hughes Model: full coat screw centrifuge Type: CP 3044 . Nr: 6299 Year of construction: 2001 Höchstzul. Speed: 3600 I/min Inner diameter drum: 448 mm Drum wall thickness: 11 mm Drum material: 50-LF2 Max capacity: 174 dm3 Zul.Dichte 1.5 kg / dm3 Total mass: 3880 kg

Moulds descaling system, containers for molding / injection moulding tools descaling, with pump pressure reducer valve control, With hoses. Connection to 230 VAC . Plant Runs in circulation .

Decanter,DDS type K 181 MC,normal capacity 40-50 m3/t

Decanter,Krüger type LX 375,hybamatic stearing

Decanter,Krüger 500 L,2-phases,15 kW motor

A Decanter is offered, Year of construction 2011, The system is ready for use, all technical data can be found in the pictures. If you have any further questions, please do not hesitate to contact us.

Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens

DECAPPER 4 HEADS Brand: Alca Impianti Year: 2007 Speed : 1.500 boxes/h Machine suitable for boxes: 4x3 and 5x4 Safety protections

Box unscrewer Rink / Germany KM 698 2K 2 unscrewing heads Running direction left - right 8,000 fl./h 0,50 l NRW glass bottles Module box of 20 Year of construction 1997 Further information and price on request

Screwdriver Alcoa Year of construction: 1991 Type: DC 2090ZS Control: Siemens S5 Capacity: up to 50,000 bhp

Decapper for screw capps 24 heads More then 300 machines new and second hand on our seema .de

Decanter Centrifuge Bowl Diameter 450 mm With control panel Skid mounted Bowl speed:3400 rpm Material: Stainless Steel Conditions New

Used Cap Unscrewer Zalkin MS 24 858 This cap unscrewing machine is branded Zalkin and was built in 2013 The machine unscrews caps at a speed of 25 000 bottles per hour thanks also to its 24 heads which allow it to reach high speeds Currently the machine is stored indoors therefore protected Included are all manuals available with instructions for using the machine Despite the years it has always been well kept with its due ordinary maintenance It is therefore ready for immediate sale with the documents included [...for more information send your inquiry to the seller.] refno: SV02

Unscrewer / Uncorker, Fabr. Rink, type: KM 740/2K E QL, box unscrewer/uncorker, 2-head for screw cap, with 1-head decorker plate, already removed and stored.

4 brand new Flottweg Z6E-4/401 hyg. decanters, complete with accessories They are still in the original wrapping from Flottweg (see photos below). We also have a brand-new spare bowl

Flow Pack format packaging machine, Auriga 500E brand. NEW, HAS NOT BEEN LAUNCHED DUE TO CESSATION OF BUSINESS. Machine structure in painted steel RAL 9006, machine protections and enclosures in AISI 304 STAINLESS steel. - All the mechanics of the machine are in the lower part, protected to avoid dirt. - Pallet entry belt, length 2,100 mm, payload area 1,400 mm, guided side on the loading belt. - Quick change input paddle, parts made of plastic material. - Manually height-adjustable longitudinal welding group, consisting of two sets of 120 mm diameter wheels, the first cold wheels, the second hot wheels, blown Air welding cooling and cold third wheels, wheel opening pneumatics. - Transverse welding group with rotary movement, width 240, open-close control pneumatic clamp, welding clamp 12.5 ms. - Product anti-entrapment system in jaws. - Machine with 3 independent motors,  ...

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

GUINARD D3L C30PC DECANTER CENTRIFUGE PREVIOUSLY USED FOR OAT MILK PRODUCTION COMPLETE STAINLESS STEEL BOWL DIAMETER: 36 CM BOWL LENGTH: 110 CM ELECTRIC MOTOR: 30 KW MACHINE COMES WITH: STAINLESS STEEL FRAME AND ELECTRIC CONTROL PANELS APPLICATION: PREVIOUSLY USED FOR OAT MILK PRODUCTION

General SKU212T535 LocationBarneveld MakeKuehni TypeDekanter No.D 9169 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity430 Ltr. Used onBulk pharmaceuticals (medicine) InletDN40 Liquid outletDN25, DN40 MaterialStainless steel 1.4571 (316Ti) Information Total height1,5 m Weight300 kg Floorspace0,6x1,8 m ATEX compatiblecheck Extra Specificationsoperating pressure: -1/10.0 bar test pressure: 13.0 bar temperature: -10/200 °C. SeparatorsKuehniCentrifuges > SeparatorsBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T506 LocationBarneveld MakeKuehni TypeDekanter No.D9168 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator MaterialStainless steel 1.4571 (316Ti) Separatorcheck Capacity430 Ltr. Used onBulk pharmaceuticals (medicine) InletDN40 Liquid outletDN25, DN40 Information Total height1,5 m Weight300 kg Floorspace0,6x1,8 m ATEX compatiblecheck Extra Specificationsoperating pressure: -1/10.0 bar test pressure: 13.0 bar temperature: -10/200 °C. SeparatorsKuehniCentrifuges > SeparatorsBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T500 LocationBarneveld MakeKuehni TypeDekanter No.D 9171 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity400 Ltr. InletDN 40 Liquid outletDN 40 (2x) Mounted on stainl. steel framecheck MaterialStainless steel 1.4571 (316Ti) Information Total height1,1 m Weight270 kg Floorspace1,92x0,7 m Extra Specificationsoperating pressure: -1/3.2 bar test pressure: 4.2 bar temperature: -10/200 °C SeparatorsKuehniCentrifuges > SeparatorsBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T494 LocationBarneveld MakeApparatebau AG TypeDekanter No.D 9172 Year of construction2001 Main Features MaterialStainless steel Specified Features - Separator Separatordecanter InletDN 50 Liquid outletDN 40 (2x) MaterialStainless steel 1.4571 (316Ti) Information Total height1,2 m Weight320 kg Floorspace1,9x1 m Extra Specificationsdesign pressure: -1/3,2 bar test pressure: 4,2 bar design temperature -10/200°C volume: 400L SeparatorsApparatebau AGCentrifuges > SeparatorsBrand > Apparatebau AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Description: Composed of 1 Speed Start 1500 car booster and 1 Deca Class 16A charger Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 20 kg

Longitudinal stroke max. approx. 680 mm Transverse stroke Max 250 mm greatest distance spindle Center to table top approximately 525 mm Magnet size approx. 600 x 200 x 90 mm Disk size 300 x 50 x 76.2 mm Speed infinitely variable 1000--3000 U/min Dimensions, B x T x H approx. 3.2 x 1.8 x 2.5 m Spindle motor approx. 2.8 8.4 kW Weight of the machine CA. 3,3 tons Facilities: -with automatic vertical delivery -Roughing, Wiles, from fires and lifting by the adjustable potentiometers -Loading position is approached after slipping automatic -Rapid traverse across approx. 1.2 m/min via electric motor -Labour / rapid traverse along approx. 5 mm / min 40 m/min with servo motor and toothed belt drive -Rapid traverse vertical approx. 0.2 m / min -Digital display for lateral and vertical axis -Quick lifting system approximately 180 strokes / min -Straight electric, dresser with size and speed comp ...

Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

We have for sale a Vacuum Evaporation Plant: The plant consists of: -3-stage vacuum evaporation system VV 75 KDB -Down-flow evaporator Condest 13 K-Niro Technical details available upon request. Vacuum evaporation is a process that has been used by the large-scale chemical industry for decades. Using vacuum evaporation systems allowed (for the first time) utilizing the advantages of this process also in small and medium-scale applications. Vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection. It is used to treat under vacuum aqueous solutions that contain pollutants. Typical fields of application include: - Recover electrolytes from electroplating - Keeping a uniform rinsing water quality in static rinsing tanks - Volume reduction of sewage wate ...

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

Bosch PSU for Amplifier TR 10, TR 15, TR 20, TR 25 ( 038035 ) inkl. 1 Jahr Garantie Exchangeprice 740,-€ without Exchange 875,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

PSU PC 2 NSV 90 (Grundig 9.44904-906 FD-Nr. 6006 04 100664) Exchangeprice 430,-€ with Exchange 530,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

PSU PC 1 NSV 80 (Grundig 9.44904-1705 FD-Nr. 6006 04 100640) Exchangeprice 500,-€ with Exchange 600,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

CPU PC 1 NPP 80 (Grundig 9.44904-1903 FD-Nr. 6006 04 100641) Exchange 710,-€ + Mwst without Exchange 810,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Used decanter centrifuge HYSEP type MD43C with carbon steel bowl and screw. Internal surface of bowl and screw flinge are lined with wolfram-carbide. Bowl has a main drive 11/12.5 kW, 1455/1755 rpm , 50/60 hz. Screw is driven by hydraulic motor with power 5.5 kW. Working rotation speed of bowl 2800 rpm. Maximal sludge density 1.2 kg/m3, working temperature up to 80C. Machine is mounted on integrated frame and is equipped with feeding pump, polimer dosing device and control panel. Bowl cover, discharges and drive covers are designed in stainless steel. Technical documentation included.

Baader 201 Violet Machine Violet machine for large cod and red fish Released: 1997-1998 Condition: excellent The machine is designed to produce standard fillets from gutted and decapitated large fish without shoulder bones. Processed cod, salmon, tuna. Equipped with a functional device for laying fish, large knives scraping rib bones, as well as guides, providing a high output of evenly cut fillets. Due to its compactness, the Baader 201 can be mounted on ships. It is possible to connect the skin-removal machine. Performance: 10, 18 or 20 fish/min clocked Working range: Atlantic cod - 50-120 cm (max. 13 kg); Cod Pacific - 54-108 cm (max. 13 kg); side - 60-120 cm (max. 12 kg), salmon - max. 9 kg, tuna - 4.5 - 9 kg. Power consumption: 4.5 kW Water consumption: 16 litres/min Dimensions: 4.70 x 1.67 x 1.45 m Mass (net/gross): 1800/2230 kg

USED NX418 DECANTER REF.: C2858 NX 418 RECONDITIONED DECANTER. Carbon steel platform, with 4-leg fixings for ground anchoring. Carbon steel frame, fixed by silemtblock to the platform. Side engine support with belt tension plate. Anchorage of main bearings. Stainless steel bowl in conical trunk shape, in three removable pieces. screw solid discharge built in stainless steel troco-conical shape with contribution of crest tostene and wing advance. Stainless steel top enclosure with three rear hinges for easy opening, screw closure. Feeding tube built in stainless steel Cam type cycle reducer. Main engine at a speed. Power from 18Kw to 3000 Rpm 400V / 50 Hz Properly oversized bearings installed according to manufacturer's standard. Rolling unit driven by 6 V-belts. Save integral protection straps. General characteristics: Model NX418 Weight 1600 kg

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of construction: 2001 Drum speed: 3,300 RPM Starting up: 2004 Usage area: In the production of base oils for the removal of solid particles. Decanter was taken out of service after a production changeover in 2004. Therefore it is fully functional and in very good condition. There are control cabinets including all wiring diagrams, as well as complete documentation! Cabinets have a frequency converter to regulate the speed of the drum. In very good condition!

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

Besides used, reconditioned separators and decanters of trademarks of GEA Westfalia Separator, Flottweg and Alfa Laval delivers more centrifuge designs, two fluids of different densities used for the drying of solids, the clarification of liquids or the simultaneous separation - hence separating centrifuge - Centrimax. Also these industrial centrifuges are by Centrimax, overhauled, with a new plc and delivered with a mechanical warranty.

A unique opportunity without intermediaries for people who want to become self-employed in the field of plastic injection molding! As of 1.3.24, we are actively discontinuing our activities in owner-managed plastic injection molding. We have been active in this field for several decades, both for our own products made of thermoplastics (ABS / POM / PC / glass fiber reinforced PA ), as well as on a contract basis for renowned companies. For sale we offer our small plastic injection moulding shop (without real estate and fixed building installations) as a whole - with currently 2 fully hydraulic Aarburg injection moulding machines type Allrounder 320-210-750 and 320-210-850 as well as all peripheral devices - all from well-known brand manufacturers, such as 2 Thermolift Arburg 100-2, various conveyor belts, various temperature control units oil and water, chiller for the cooling circuit ...

Ignition device MWM Deutz 12320994 Original - Suitable for MWM TCG 2020 ,TBG 620 engines - 12320994; 1232-0994; 1232 0994 - Successor: 12324320; 1232-4320; 1232 4320 - Deutz TEM-ZS2 - Please note! If you purchase this item at this price, we will ask for a defective ignition device in exchange for an exchange sale. The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partners ...

Ignition device MWM Deutz 12320993 Original - Price per ignition device! - Suitable for several engines such as MWM TCG 2020, TBG 620 engines - 12320993; 1232-0993; 1232 0993 - Successor: 12324319 ; 1232-4319 ; 1232 4319 - Deutz TEM-ZS3 - Please note! If you purchase this item at this price, we will ask for a defective ignition device in exchange for an exchange sale. The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power pla ...