deburring used for sale

This TIMESAVERS 42-SERIE-1350-RB Deburring machine was manufactured in 2012 in Netherlands. This machines passage width is 1350 mm. It comes with rotating brushes that include wet extraction unit. Contact us anytime for further information.

This ERNST EM5N II/L Deburring machine was manufactured in the year 2007.

Deburring machine PAGUS Table: 550 x 300 mm Working height: 855 mm Speed (tool): approx. 700 rpm Tool holder: 10 x 10 mm Motor: 1,1,6 kW 1430 rpm 220 / 380 V 3AC used, tested ! Dimensions: 750 x 580 x 930 mm

Deburring machine JOHANN STREICHER KG table: 75 x 38 mm Tool diameter: Ø 80 mm Speed (tool): approx. 700 rpm engine: AEG AM 80 K4 0,55 kW 1400 rpm 220 / 380 V 3AC 50 Hz ratio ( belt drive ): 2 : 1 used, checked ! Dimensions: 400 x 275 x 450 mm

Deburring cutter, milling cutter JONGEN WERKZEUGTECHNIK EF-10-82 Diameter: 32 mm Number of cutting edges: 1 Effective depth: 40 mm Shaft diameter: 25 mm Total length: 100 mm Plate seat: L01 New ! Dimensions ( cutter ): Ø 32 x 100 mm Dimensions ( transport box ): 105 x 38 x 34 mm

RAUSCH Gratomat 50 W - Gear deburring machine -Workpiece dimensions MODULE 1-10 -Workpiece diameter max. 400mm -Workpiece height max 150mm -Workpiece weight max. 25 kg -2x three-jaw chuck Itv87ta8f Dimensions: LxWxH 1x0.8 x1.3 meters /Weight 110Kg

Deburring machine Lissamac SBM XL S2B2

Machine in good technical condition, minimally used. Robust and fast deburring for symmetrical and asymmetrical workpieces. De-needling time 1 to 5 seconds (on the front surface). Speeds rpm 1,500 + 3,000 Cross-sections mm 20 x 20 to 120 x 120, 10 x 10 to 120 x 120 Materials: steel, stainless steel, aluminum, non-ferrous metals Power: 4.9 kW Max. thread diameter: 250 mm.

Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt ; Without grinding belt fuehrung

diameter: 180 mm workpiece length: 0 mm work piece width: 1350 mm total power requirement: 65 kW weight of the machine ca.: 7.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 1000 mm Width: 455 mm Number of speeds: up to: 1400 rpm Appropriated for: deburing Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.25 kW Overall dimensions machine: Length: 1400 mm Width: 800 mm Height: 1650 mm

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Diameter: 450 mm Tank volume: 32 l Max. loading capacity: 95 kg Number of speeds: Voltage 50 Hz 3x: 380 Volt Installed power: 1.87 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1800 mm

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 590 mm Width: 300 mm Tank volume: 42 l Number of speeds: up to: 1500 rpm Installed power: 0.25 kW Machine´s weight about: 251 kg Overall dimensions machine: Length: 730 mm Width: 620 mm Height: 1000 mm

Technical data Execution: barrel-burnishing Number of tanks: 2 Polishing bell Behältergrösse: hexagon up: 400 mm Charging hole:: 2 x Length: 150 mm Width: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 2.2 / 1.6 kW Overall dimensions machine: Length: 900 mm Width: 800 mm Height: 1300 mm

Technical data Execution: Vibrating Internal diameter: 1200 mm Height: 350 mm Volume: 300 l Machine´s weight about: 700 kg Overall dimensions machine: Length: 1900 mm Width: 1600 mm Height: 1250 mm Various accessories: Control box Timer

Includes lid and settling tank Only 1437 hours

Machine Type: Press Brake Manufacturer: HACO Type: ERM36250 Year of construction: 2011 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-1 DESCRIPTION We offer you a used press brake from the manufacturer HACO. Press force 250t Bending length 3600mm further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

Escofier I300V Gear Rolling Machine CNC Thread Roller & Polishing Machine Fabr. Escofier, type Flex 40 Syncroll, YOC 2011 Siemens control system, type Sinumerik

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Brush spindle RPM:1500 / 3000 1/min Brush diameter:250 mm max. workpiece diameter:90 mm Dimensions (L/W/H):720 x 1150 x 450 mm connected load:3,1 kVA connected load frequency:400 V

max. wheel diameter:30-150 mm max. module:6 total power requirement:36 kW weight of the machine ca.:11 t dimensions of the machine ca.:2,4 x 2,5 x 3,4 m

weight of the machine ca.:4 t

max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg

max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg

max. working width: 1500 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2730 mm Width: 1500 mm Height: 1532 mm Machine weight: 2200 kg

max. working width: 1000 mm workable material thickness: 0,5 - 120 mm Working hours machine: h Total power: 98 A Total current consumption: 45 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3790 kg

Connected load: 8kW, weight: 2.2t, with control cabinet.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Diameter: 250mm, wire thicknesses: 0.20mm/0.27mm/0.35mm/0.38mm/0.50, grit size (RASALON): 80/120/180/320/500. Brush roller: Brush speed: 1500/3000rpm. Dimensions X/Y/Z: 700mm/440mm/1200mm. Including workpiece support and prism guide. Documentation available.

Processing: both sides, dry, max. workpiece width: 1300mm, material thickness: 0.8-100mm, max. passage width: 1300mm, length: 3100mm, width: 2100mm, height: 2400mm, weight: 5.6t, total operating hours/automatic: 11,002/ 5566h, including 2x 2000mm auxiliary conveyors and extensive documentation, without extraction system or abrasives, on-site inspection is possible.

Specifications: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Height adjustable support table with V recesses - Working height 900 mm - Space requirement approx. W 750 x H 1150 x D 5ß0 mm - Weight approx. 200 kg - separate dust extraction - Drive 400 V - Space requirement approx. W 650 x H 1100 x D 650 mm - Weight approx. 50 kg

Metal sheets edge processing machine Euro Fintec 845. Used, in working condition. The thickness of the metal sheet is 0.5-30 mm. Integrated vacuum extractor for metal dust. 800x450mm Horizontal Linishing, 50x600mm Vertical Linishing, 150mm Dia Beburring Head. Machine is on mobile bench.

Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg

Brush burr Weight approx. 65 kg Please inquire with location and postcode. VAT not deductible

CELL COMPOSED OF: 2 MULTICONTACT GRINDING UNITS WITH 3 BELTS fully automatic with intelligent system, capable of maintaining the programmed working pressure constant. 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 2 KAWASAKI RS50N ROBOTS each having a wrist capacity of 50 kg. Each robot is complete with: _ANTI-SPARK PROTECTION on the wrist; _TICKET INSPECTOR; _PNEUMATIC SYSTEM.

The machine is in good technical condition. Maximum workpiece width: 300 mm Maximum workpiece width and length (double-sided processing): 200 mm Minimum part size: 25 x 25 x 1mm Min. and max. thickness workpiece: 1-15mm Feed speed: 0-2m/min Workpiece thickness setting: electric Tool setting: manual Total machine power: 5kW Total current consumption: 8A Weight: 1400kg Dimensions: 1300 x 2300 x 1900mm 517 engine hours have been worked on the machine. The machine comes with a new set of grinding wheels worth 1700 Euros - they have not been installed yet. By prior arrangement, the possibility of a tour in progress.

Inv. Num. : 6870 Type: M950 Producer: SCM Created: 2017 Parameters: Weight: 2200 kg

Description: Machine number: 7070 Operating voltage: 230 V Frequency: 50 Hz Table dimensions: approx. 750 mm Approx. Onsite Dimension. (l x w x h): 800 x 500 x 200 mm, weight approx.: 70 kg

Description: Machine number: 01206M42 Operating voltage: 400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions: 550 x 100 mm Approx. Onsite Dimension. (l x w x h): 530 x 530 x 1,200 mm, weight approx.: 100 kg

Inv. Num. : 7417 Type: BSM 1300 RRDB Producer: RWT Created: 2015 Parameters: Vacuum belt width: 1300 mm Diameter of grinding rollers: 180 mm Feed roller diameter: 50 mm The thickness of the workpiece: 0.5-160 mm Abrasive belt speed: 18 m/s Weight: 2840 kg

Description: Minimal Sheet Dimension: 300 x 300 x 1 mm Maximum Sheet Dimension: n/a x 1300 x 100 mm Maximum Sheet Weight: 100 kg Complete with manuals and all original documentaion. Includes ,extraction system Approx. Onsite Dimension. (l x w x h): 1,930 x 1,492 x 1,951 mm, weight approx.: 2,200 kg

Description: 2,860 rpm Approx. Onsite Dimension. (l x w x h): 330 x 330 x 1,160 mm, weight approx.: 24 kg

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 290 mm   automatic feed with belt conveyor: yes   number of brushing station: 2   demagnetizer: yes BRUSHING UNIT   number of brushes: 5   drive power: 4 kW ELECTRICAL SPECIFICATIONS   total power consumption: 8 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3250 mm   space requirements -front/back-: 1040 mm   total height: 2500 mm   total weight approx.: 2750 kg Workpiece width: max. 290 mm Workpiece height: max. 180 mm Height adjustment: 200 mm Tools per unit: 5 Tool diameter: 150 mm Pitch circle diameter: 280 mm Housing speed: max. 260 /min Spindle speed: max. 3000 /min

6 Drum Deburring Machine Fabr. HARTMANNYear 1984Number of drums: 6Inside size of the drums: 110 x 110 x 230 mmExternal dimensions: 950 x 1000 x 1600 mmWith- Separate control cabinet- Jogging mode- Timer- Remove and load the drums outside- Soundproof cabinused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

plate thickness: 5,0 mm turning speed range: 1500 / 3000 U/min diameter of brush: 250 mm width of brush: 80 mm voltage: 380 Volt total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 700 x 460 x 1200 mm Description : RASAMAX DUO was specially developed for the fast and reliable developed for deburring straight sheet metal. The deburring machine has two counter-rotating deburring brushes that two offset levels. With this principle, upper and Lower edge of sheet metal deburred simultaneously in one operation. This means up to 50% time savings compared to other methods! RASAMAX DUO is suitable for deburring individual pieces and small series and designed with its robust construction for continuous use. Furnishing: - efficient deburring of straight sheets - for steel, stainless steel, non-ferrous metals The data for this ad was created with  ...

Chamfering and deburring machine for gears, type: zea-4, manufactured by gleason hurth, germany, 2009. Siemens cnc control. Technical condition - like new! The Gleason-Hurth ZEA-4 rotary deburring machine is designed for dry deburring of disc details up to 280mm in diameter and shafts up to 400mm in length, max. module 5. There is a set for the deburring machine. DTR.