debur used for sale

max. wheel diameter:30-150 mm max. module:6 total power requirement:36 kW weight of the machine ca.:11 t dimensions of the machine ca.:2,4 x 2,5 x 3,4 m

weight of the machine ca.:4 t

max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg

max. working width: 1500 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2730 mm Width: 1500 mm Height: 1532 mm Machine weight: 2200 kg

max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg

max. working width: 1000 mm workable material thickness: 0,5 - 120 mm Working hours machine: h Total power: 98 A Total current consumption: 45 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3790 kg

Connected load: 8kW, weight: 2.2t, with control cabinet.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Diameter: 250mm, wire thicknesses: 0.20mm/0.27mm/0.35mm/0.38mm/0.50, grit size (RASALON): 80/120/180/320/500. Brush roller: Brush speed: 1500/3000rpm. Dimensions X/Y/Z: 700mm/440mm/1200mm. Including workpiece support and prism guide. Documentation available.

Processing: both sides, dry, max. workpiece width: 1300mm, material thickness: 0.8-100mm, max. passage width: 1300mm, length: 3100mm, width: 2100mm, height: 2400mm, weight: 5.6t, total operating hours/automatic: 11,002/ 5566h, including 2x 2000mm auxiliary conveyors and extensive documentation, without extraction system or abrasives, on-site inspection is possible.

Sheet metal deburring machine Manufacturer: ERNST Type: EM5/N900 Year of construction: 1999 Control type: conventional Working width: 880 mm Workpiece height: 1-70 mm Grinding drum diameter: 420 mm Machine weight approx.: 2,800 kg Dimensions approx.: 2,500 x 1,715 x1,675 mm automatic sheet metal deburring machine working in wet grinding process automatic magnetic filter system Wet sanding device Washing and drying facilities Maglev width: 200 mm Minimum length of small parts: 80 mm

: neu : 2023 : 5535 : prompt, Zwischenverkauf v : Italien : 13600 € : 1 : 1300 mm : 150 mm : 150 mm : 250x350 mm : 945 mm : 0.75 kW : 1400 mm : 1000 mm : 1450 mm : 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: The grin ...

Specifications: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Height adjustable support table with V recesses - Working height 900 mm - Space requirement approx. W 750 x H 1150 x D 5ß0 mm - Weight approx. 200 kg - separate dust extraction - Drive 400 V - Space requirement approx. W 650 x H 1100 x D 650 mm - Weight approx. 50 kg

Deburrer, Deburring device, Deburring device LAMBERT Tool holder: 45 x 12 x 12 mm Adjustment range (horizontal): 35 mm Adjustment range (vertical): 30 mm Base: 135 x 80 mm, Material thickness: 25 mm Slotted hole for fastening: Ø 15 mm, Length: 110 mm used, checked! Dimensions: 285 x 105 x 135 mm

Deburrer, Deburring device, Deburring device LAMBERT Tool holder: 50 x 12 x 12 mm Adjustment range (horizontal): 25 mm Adjustment range (vertical): 55 mm Base: 115 x 60 mm, Material thickness: 20 mm Slotted hole for fastening: Ø 15 mm, Length: 83 mm used, checked! Dimensions: 240 x 75 x 140 mm

Deburrer, deburring device, deburring device LAMBERT Tool holder: 40 x 10 x 10 mm ( 2-fold ) adjustment ( horizontal ): in slotted hole Ø 11 mm, length: 40 mm, 360° rotatable Adjustment range ( vertical ): 65 mm Base: 135 x 80 mm, material thickness: 25 mm slotted hole for fastening: Ø 15 mm, length: 110 mm used, tested ! Dimensions: 285 x 105 x 135 mm

Brush deburring machine, double grinding stand, deburring machine ELBTALWERK SETr2x350 TGL 16570 Disc diameter Ø max 350 mm Disc width max 40 mm 1,5 kW 1500 rpm 380 V with 2 wire brushes Dimensions: 810 x 450 x 1220 mm

Deburring machine, hole deburrer, bore deburrer, deburring device -Drive: 0.30 kW -Countersink -Speed: 585 rpm -Dimensions: 500/300/H460 mm -Weight: 31 kg

Deburring machine PAGUS Table: 550 x 300 mm Working height: 855 mm Speed (tool): approx. 700 rpm Tool holder: 10 x 10 mm Motor: 1,1,6 kW 1430 rpm 220 / 380 V 3AC used, tested ! Dimensions: 750 x 580 x 930 mm

Deburring machine JOHANN STREICHER KG table: 75 x 38 mm Tool diameter: Ø 80 mm Speed (tool): approx. 700 rpm engine: AEG AM 80 K4 0,55 kW 1400 rpm 220 / 380 V 3AC 50 Hz ratio ( belt drive ): 2 : 1 used, checked ! Dimensions: 400 x 275 x 450 mm

Deburring cutter, milling cutter JONGEN WERKZEUGTECHNIK EF-10-82 Diameter: 32 mm Number of cutting edges: 1 Effective depth: 40 mm Shaft diameter: 25 mm Total length: 100 mm Plate seat: L01 New ! Dimensions ( cutter ): Ø 32 x 100 mm Dimensions ( transport box ): 105 x 38 x 34 mm

Deburring machine, hole deburrer, bore deburrer, deburring device -Manufacturer: Grit / Fein, deburring machine type GIE on a mobile base -Model No.: 7 902 07 00 40 3 -Drive: 1.5 kW / 2875 rpm -Brush: Ø 230 x 100 mm -Accessories: incl. see photos -Total dimensions: 930/580/H1250 mm -Total weight: 82 kg

Brush deburring machine, sheet metal deburring machine, deburring machine, -Deburring machine for: punching, laser and nibbling parts -Deburring system for: sheet metal edges with notches -Drive power: 0.71 kW Speed: 4500 rpm -Dimensions: 400/180/H130 mm -Weight: 3.5 kg

Cutter with deburrer Adige TT640 cutter Adige ST660 deburring machine, The machine is in perfect condition and completely serviced. It has a new head motor, new jaw prisms and new ST660 chains among many other changed elements, it is ready for operation. Max cutting length with or without deburring: 1500 mm. Min/max diameter: - Round: 10 to 80 - Square: 10x10 to 70x70 - Rectangular: 15x10 to 80x70. Min/max cutting thickness: full bar 12 to 35 Min/max inlet length: 2500 to 6500 mm Min/max single cut output length: 50 to 1500 mm Cutting and planing output length min/max: 150 to 1500 mm Cutting head motor power: 400V 2V 1400/2800 rpm 3.5 kW

Metal sheets edge processing machine Euro Fintec 845. Used, in working condition. The thickness of the metal sheet is 0.5-30 mm. Integrated vacuum extractor for metal dust. 800x450mm Horizontal Linishing, 50x600mm Vertical Linishing, 150mm Dia Beburring Head. Machine is on mobile bench.

RAUSCH Gratomat 50 W - Gear deburring machine -Workpiece dimensions MODULE 1-10 -Workpiece diameter max. 400mm -Workpiece height max 150mm -Workpiece weight max. 25 kg -2x three-jaw chuck Itv87ta8f Dimensions: LxWxH 1x0.8 x1.3 meters /Weight 110Kg

Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg

Brush burr Weight approx. 65 kg Please inquire with location and postcode. VAT not deductible

CELL COMPOSED OF: 2 MULTICONTACT GRINDING UNITS WITH 3 BELTS fully automatic with intelligent system, capable of maintaining the programmed working pressure constant. 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 2 KAWASAKI RS50N ROBOTS each having a wrist capacity of 50 kg. Each robot is complete with: _ANTI-SPARK PROTECTION on the wrist; _TICKET INSPECTOR; _PNEUMATIC SYSTEM.

Deburring machine Lissamac SBM XL S2B2

Machine in good technical condition, minimally used. Robust and fast deburring for symmetrical and asymmetrical workpieces. De-needling time 1 to 5 seconds (on the front surface). Speeds rpm 1,500 + 3,000 Cross-sections mm 20 x 20 to 120 x 120, 10 x 10 to 120 x 120 Materials: steel, stainless steel, aluminum, non-ferrous metals Power: 4.9 kW Max. thread diameter: 250 mm.

The machine is in good technical condition. Maximum workpiece width: 300 mm Maximum workpiece width and length (double-sided processing): 200 mm Minimum part size: 25 x 25 x 1mm Min. and max. thickness workpiece: 1-15mm Feed speed: 0-2m/min Workpiece thickness setting: electric Tool setting: manual Total machine power: 5kW Total current consumption: 8A Weight: 1400kg Dimensions: 1300 x 2300 x 1900mm 517 engine hours have been worked on the machine. The machine comes with a new set of grinding wheels worth 1700 Euros - they have not been installed yet. By prior arrangement, the possibility of a tour in progress.

Inv. Num. : 6870 Type: M950 Producer: SCM Created: 2017 Parameters: Weight: 2200 kg

Description: Machine number: 7070 Operating voltage: 230 V Frequency: 50 Hz Table dimensions: approx. 750 mm Approx. Onsite Dimension. (l x w x h): 800 x 500 x 200 mm, weight approx.: 70 kg

Description: Machine number: 01206M42 Operating voltage: 400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions: 550 x 100 mm Approx. Onsite Dimension. (l x w x h): 530 x 530 x 1,200 mm, weight approx.: 100 kg

Deburring machine, hole deburrer, hole deburrer, deburring device, brush deburring machine -Manufacturer: Wedge, deburring machine Keil-Single with base frame -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Total dimensions: 800/800/H1210 mm -Total weight: 110 kg

Inv. Num. : 7417 Type: BSM 1300 RRDB Producer: RWT Created: 2015 Parameters: Vacuum belt width: 1300 mm Diameter of grinding rollers: 180 mm Feed roller diameter: 50 mm The thickness of the workpiece: 0.5-160 mm Abrasive belt speed: 18 m/s Weight: 2840 kg

Description: Minimal Sheet Dimension: 300 x 300 x 1 mm Maximum Sheet Dimension: n/a x 1300 x 100 mm Maximum Sheet Weight: 100 kg Complete with manuals and all original documentaion. Includes ,extraction system Approx. Onsite Dimension. (l x w x h): 1,930 x 1,492 x 1,951 mm, weight approx.: 2,200 kg

Description: 2,860 rpm Approx. Onsite Dimension. (l x w x h): 330 x 330 x 1,160 mm, weight approx.: 24 kg

: neu : 2024 : 5551 : Mai 2024, Zwischenverkauf : Italien : 57800 € : 1161.78 € : 1 : 650 mm : 0,5 - 170 mm : 670 x 2200 mm : 4000 m³/h : 120 mm : 6 bar : 78 (+/-2) dB : 1045 mm : 1735 mm : 2090 mm : 930 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on req ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 145200 € : 2889.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1487.4 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable  ...

Description: Dual-tube cutting machine DCH70M with deburrer BEWO DB 70 No. 9811463 Specifications: - Workable diameter: 12 - 76 mm - Range of workable lengths: 35 - 4000 mm - Range of brushable lengths: 140 - 4000 mm , - Rated power of cutting unit: 5.5 kW - Range of cutting unit speed: 20 - 120 m/min Equipment: - Bar loader with beam magazine - Control panel containing Siemens 57 PLC - Packing table - Air-channelized tube cleaning system - User and maintenance manual - CE conformity Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 6000x2300mm - 2650 Kg Cutting unit: 6800 x 1300mm - 3200 Kg weight approx.: 7,100 kg, Approx. Onsite Dimension. (l x w x h): 18,400 x 2,300 x 1,800 mm

Description: Two-pipe cutting machine DCH76M with BEWO DB 90 deburring machine Suitable for cutting two pipes at the same time and deburring them. N° 0711598 Specification: , Machinable diameter: 8 - 76 mm Workable length range: 40 - 2000 mm Brushable length range: 140 - 2000 mm , Rated power of cut-off unit: 5.5 kW Cut-off unit speed range: 30 -180 m/min Machine equipped with: , Bar feeder with bundle magazine with 5 guides Control panel containing PLC SIEMENS 57 Packing change table Ducted air tube cleaning system Use and maintenance manual Harmonisation of CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 4600x2300mm - 2200 Kg Cutting unit: 4500x1300mm - 2800 Kg weight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 5,600 x 2,300 x 1,800 mm

Description: SAMPUTENSILI SU-SM 2TA Gear Tooth Deburring Machine weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,000 mm

Description: Drum capacity: 400L Average filling weight: 600 kg Width of inner drum: 920 mm Max working dimension: 850x200 mm Max piece weight: 30 kg Motor: 400v, 50 hz, 3kW Rotation drum: 4-18 rpm Applications: Deburring, Degreasing, De-oiling, Decalcifying, Rust removal, Polishing Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 2,000 mm, weight approx.: 1,800 kg

Description: Machine with 1,2 or 3 units Useful width: 600mm Parts up to 150mm high can be passed through. As an option (extra charge), the machine can be fitted with a 300 mm high feeder. Brush dimensions: Ext. diam. 300mm and int. diam. 146 or 70mm, length = working width Belt dimensions L x W, mm: 1900 x630 Main motors HP/kW: 15/11 Feed speed variators, m/min: 6-24 or 3-18 Feed motors HP/kW: 1.5/1.1 Brush oscillation, c/m: 60 or 110 Suction per unit below 125 mm w.c. (wet separator recommended for aluminium) 1 Strip-deburring unit, m3/h. min. : 1500 1 Strip deburring unit, m3/h. max. : 2500 1 Brush unit -m3/h. min.: 1000 Approx. Onsite Dimension. (l x w x h): 2,400 x 2,000 x 2,470 mm, weight approx.: 7,000 kg, plate thickness: 150 mm

Description: Two-pipe cutting machine DCH76M with BEWO DB 90 deburring machine Suitable for cutting two pipes at the same time and deburring them. N° 0611655 Specification: , Machinable diameter: 8 - 76 mm Workable length range: 40 - 2000 mm Brushable length range: 140 - 2000 mm , Rated power of cut-off unit: 5.5 kW Cut-off unit speed range: 30 -180 m/min Machine equipped with: , Bar feeder with bundle magazine with 5 guides Control panel containing PLC SIEMENS 57 Packing change table Ducted air tube cleaning system Use and maintenance manual Harmonisation of CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 4600x2300mm - 2200 Kg Cutting unit: 4500 x 1300mm - 2800 Kg weight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 14,700 x 2,300 x 1,800 mm

Description: DCH70M twin tube cutting machine with BEWO DB 70 deburring machine N° 0012419 Specification: , Machinable diameter: 12 - 70 mm Machinable length range: 35 - 2000 mm Brushable length range: 140 - 1500 mm , Rated power of cut-off unit: 5.5 kW Log saw unit speed range: 20 -120 m/min Machine equipped with: , Bar feeder with bundle magazine with 5 guides Ducted air tube cleaning system Operation and maintenance manual Harmonisation to CE standards Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 3800x2300mm - 1950 Kg Cutting unit: 4500 x 1300mm - 2800 Kg weight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 13,900 x 2,300 x 1,800 mm

Description: Dual-tube cutting machine DCH70M with deburrer BEWO DB 70 No. 0212157 Specifications: - Workable diameter: 12 - 70 mm - Range of workable lengths: 35 - 2000 mm - Range of brushable lengths: 140 - 2000 mm - Rated power of cutting unit: 5.5 kW - Range of cutting unit speed: 20 -120 m/min Equipment: - Bar loader with beam magazine with 5 guides - Air-channelized tube cleaning system - User and maintenance manual - CE conformity Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 4600x2300mm - 2200 Kg Cutting unit: 4500x1300mm - 2800 Kg weight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 14,700 x 2,300 x 1,800 mm