de used for sale

Engine number: 6 902 653 Power: 23 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 7 805 371 Power: 39 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Durchlauf - Schneidegatter, Fabr. Delta

Engine number: 017 5 241 Power: 57 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 2 472 863/64 Power: 22 HP Speed: 2000 1/min overhauled, no generator, starter Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 8 069 531 Power: 45 kW Speed: 3000 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Engine number: 4-139-190-193 Power: 51 HP Speed: 2500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

Engine number: 5 066 973 Power: 38 HP Speed: 2300 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

Engine number: 6 567 130 Output: 44 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

Engine number: 4 392 859/60 Power: 20 HP Speed: 1800 1/min overhauled, no generator, starter, with alternator Price Excl. VAT, subject to prior sale Photos on request

Used in stock

Used rummage guide

Available Recon

Engine number: 5 478 583 Power: 486 HP Speed: 1650 1/min overhauled, no generator, no alternator, with injection timing Price Excl. VAT, subject to prior sale Photos on request

Engine number: 6 217 155 Power: 220 kW Speed: 1500 1/min overhauled, no generator, no starter, no intercooler Price Excl. VAT, subject to prior sale Photos on request

Sorfort available used

Immediately available used connecting rods.

Immediately available used connecting rod rods

100L stainless hopper, adjustable fill size on mobile stainless frame

Cooling water pump overtook 716 V12 in Exchange for Deutz

Cylinder heads for Deutz 716 in Exchange

Cylinder heads for Deutz 716 on an exchange basis

Immediately available used

Immediately available used pistons

Sorfort available used

Element welding Turntable werkstueck drehvorrichtung

Sorfort available used crankcases

Key data: 1027 KW, 1805 1/min

TO WHOM IT MAY CONCERN ; WE VE 2 PCS USED PROPULSUION ENGINES DEUTZ MWM TBD 620V8 AT OUR STOCK. ENGINES WERE DISMANTLED FROM SUPER YACHT . ENGINES ARE FULL ORIGINAL MARINE ENGINES. ENGINES ARE IN GOOD WORKING CONDATIONS . ENGINE DETAILS ON BELOW TYPE. : DEUTZ MWM TBD 620V8 YOB. : 2002 KW. : 1027 RPM. : 1805 ENGINES NO. : 2203455 & 2203456 ENGINES READY TO INSECTIONS AT OUR WARE HOUSE AND READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. ENGINES HAS ALSO ZF GEAR BOXES ( THOSE CAN SELL SEPERATLEY ) ZF 4600 NR CAP. AYHAN UGURLUBAY With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Recon Part number: 0400 6046 Cast: 0215 9704 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 0400 5186 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Stove new lamps, rear door new gasket. Oven cleaned and tested. The in-store baking oven "MINI 8 RD" works with a moving baking atmosphere. A rotating axial fan mounted in the underside of the oven directs the air evenly to the baked goods via the heating rods. The special feature of the in-store oven "MINI 8 RD" lies in the second transparent baking chamber door at the back of the oven. This makes it possible to integrate the in-store baking oven into a sales counter and to enable the customer to directly observe the baking process via the glass back wall. The oven is also equipped with a fully electronic pictogram control system, which is particularly distinguished by its simplicity of operation. All functions of the furnace are taken over by this control system, and the necessary operating procedures are thus reduced to a minimum. It enables automatic baking according to programme ...

RECON Part number: 0400 5187 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 0401 6678 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Immediately available used crankcases

RECON Part number: 0215 4713 / 0215 5198 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Immediately available used turbo

RECON Part number: 0215 4709 = 0215 5197 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

- Please note! Price per piece! - Suitable for several motors - LS-4000 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes int ...

- Please note! Price per piece! - Suitable for TCG 2020 V12 - 12304116 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...

Immediately available used compressor

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

Special charging device with pulse device. Weight approx. 250kg! 48Volt 150 ampere. With this loader, you can regenerate old batteries. Charging for forklift battery suitable for 24 cells 48 Volt 150 Ampere very good condition First picture similar! second and third picture of the original! More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please please ask. Varta Belatron Deta Special price

; Gross weight [kg]: 532; Registration Number: 1; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

320 pieces Multishuttle Dematic DMS2 STATIC Used goods built in 2019, very good condition, see pictures Load capacity: 31.5kg Load types: plastic containers, cartons, trays, containers How it works: Dematic Multishuttle 2 Overview - YouTube Negotiation price: € 2.900,- net ex stock Negotiation price: 1 piece € 5.900,- net/piece from 5 pieces € 4.900,- net/piece from 10 pieces € 3.900,- net/piece from 50 pieces € 2.900,- net/piece Very few hours of operation! Steel construction, rails, etc. available. Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVE ...

24Volt 120 Ampere! Very strong charging for large batteries! Charging for forklift battery suitable for 12 cells 24 Volt 120 Ampere good condition More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price

Dematic EPRE Vertical Lift Used goods built in 2019, very good condition, see pictures Transport height: 11 m Maximum speed 4 m/s Suitable for Multishuttle Dematic DMS2STATIC 34 pieces available. Negotiation price: from € 3.500,-/ piece net ex location Depending on the design and purchase quantity Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The following products of the plant are also available for sale: 300 x Dematic Multishuttle Strain Gauge 2 - 31.5 kg 350 m Dematic Sorter Flex Sort Crossbelt  ...

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 80/190 Power connection 380Volt Power 80 Volt 190 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 131cm Width 55cm Depth 40cm Weight 180kg Ready to use Special price