de used for sale

Used complete powder plant existing out of evaporator (4-effect, TVR), high pressure pump (homogeniser) and spray dryer., Previously used for whole milk powder (WMP). Line was running an input of ± 280.000 liters whole milk per day and an output of ± 28.000 kg of WMP per day., Still mounted inside the factory., The main components of the line:, - Evaporator, 4-effect, TVR, Manufacturer: Tebel - Van der Ploeg, Type: Falling film evaporator, Stages: 4-effect (stage 3 and 4 are later on divided in 2 different stages for a better heat transfer, 1-2-3ab-4ab), Tube diameter of all stages: 35 mm, Pre-heater, Year: 1975, Long and short holding tube, Capacity input for whole milk: ± 13.000 liter per hour (± 11,2% TS), Capacity output for whole milk: ± 3.000 kg per hour (± 48% TS), Capacity input for skim milk: ± 14.500 liter per hour (± 8,8% TS), Capacity output for skim milk: 3.000 ± li ...

5-axis Vertical machining center DMG DECKEL MAHO, ready for refurbishment, ellectrical issuee, not working

x-travel: 2600 mm y-travel: 1100 mm z-travel: 900 mm control: Heidenhain iTNC530 spindle turning speed range: 0-10.000 U/min tool taper: SK 50 Tool magazine slots: 30 St./pcs. table surface area: 3200 x 1100 mm max. table load: 1200 kg rotary table dia.: 1050 mm weight of the machine ca.: 25550 kg Features/Accessories: -IKZ 40 bar -electric handwheel -technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour - 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Control: Dialog 2 total power requirement: 1,6 / 2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m No. 5290 Universal tool milling machine DECKEL FP 2 NC / 2801 Working area: 300 x 220 x 400 Drive: 1.6/2 kW Control: Dialog 2 contouring control Fixed table with chip tray Spindle SK 40 Speed range up to 3150 min-1 Quill stroke 65 + 60 mm Space requirement c.3 x 3.5 m Transport dimensions approx. 2 loading meters Weight approx. 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis

x-travel:780 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:10 t Number of axles:5 St. spindle turning speed range:20-12.000 U/min numbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mm Round Table B-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t

x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.

x-travel:630 mm y-travel:560 mm z-travel:560 mm total power requirement:10 /15 kW weight of the machine ca.:6500 kg dimensions of the machine ca.: 4,4 x 5,4 x 2,9 m Table dimensions:1000 x 610 mm Loading:400 kg rapid traverse::X 26, Y 26, Z 20 m/min speeds::20 - 12.000 min -1 tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St. control:CNC MillPlus/TNC430 Documents:vorhanden

x-travel:560 mm y-travel:500 mm z-travel:450 mm total power requirement:16,5 kVA weight of the machine ca.:2700 kg dimensions of the machine ca.:2,30 x 3,0 x 1,90 m control:Grundig quill stroke:80 mm tool taper:SK 40 spindle speeds::40..4000 1/min feed:2 .3600 mm/min rapid traverse:4000 mm/min Documents:vorhanden

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2022, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whiche ...

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2023, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whiche ...

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2023, Model year: 2024, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, o ...

Decoiler, Reversible Decoiler GSW SCHWABE Type LHD 50/800 SondDouble Decoiler, Double DecoilerFabr. No. 5775 Year of construction approx. 1995Coil weight 50 kg per sideCoil width max. 130 mmCoil inner diameter 155 - 445 mmCoil outer diameter 850 mmFeed washers 850 mmThrust rings 850Middle reel shaft to reel foot 980 mm- Reel structure manually rotatable by 180 with locking steps- central spread via rotary lever adjustment- mechanical disc brake, adjustable brake shoes via knurled screwSpace requirement

Langguth V 81 Bucket Destapler,Destapler for unpalpping buckets Bucket size from 2.5 - 20 l automatic handle alignment Very good condition, directly from production!

230 volts, including 1 ditto defect Auction-ID: A1-50889-49

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Without roller board Auction-ID: A7-51473-18

Power 580-800 W, without rolling table Auction-ID: A7-51473-19

Auction-ID: A7-51473-21

Vaporetta VDG 1404 delaminator for separating 3 films connected to each other (carrier film, useful film and protective film). Material width max. 400 mm The still connected foils are passed from a roller through 2 sheets, at the rear edge of which they are separated from each other. The separation is achieved by pulling the foils in different directions. The protective film and the carrier film are rolled up on spindles via slip clutches and disposed of later. The usable film runs through a silicone-coated pair of printing rollers and then into the cutter via various deflections and a dancer that coordinates the laminator with the cutter. The machine can also be used as a sheeter for roll stock to produce sheets from roll stock. With documentation.

Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 29-0520 Year of construction 1992Brush diameter 250 mmBrush width 25 - 55 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNerg connection 380 Volt, 50 Hz- Material supportSpace requirement L x W x H 500 x 450 x 440 mmWeight 45 kgGood condition; used

Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 05-72025 Year of construction 2005Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brushSpace requirement L x W x H 550 x 450 x 440 mmWeight 65 kgGood condition; used

Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used

Writing desk, rolling desk, shelf trolley, logistics trolley, shelf trolleyTransport trolley, platform trolley, workshop trolleyFETRA Type 5834Writing surface height: 1100 / 1190 mmWriting surface: 605 x 585 mmStorage shelves: 600 x 495Load capacity per shelf: 50 kgTotal load capacity: 100 kg- Rolling desk made of tubular steel and profiled steel screw construction, powder-coated, blue RAL 5007- Writing surface on wooden board with stop rail, approx. 10 inclined- 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces Swivel fixed castors (125 mm) with plastic rim and

With a robust 1700W motor, this breaker is built to deliver excellent performance. It generates a staggering 65J of impact force, making it your first choice for high-speed chiseling and material removal tasks. This tool is a versatile workhorse that can handle a wide range of heavy materials, including brick, blocks, asphalt, and concrete. The 30mm Hex Chuck provides a firm grip on your chisels and bits, allowing for precise and efficient work. pointed chisel 30hex x 410mm - flat chisel 30hex x 410mm Model 21-DH1700 Voltage 230V 50Hz Power 1700W Hammer impact frequency 0-1900 blows per minute Hammer impact force 65J Claw 30mm hexagon Shift type Tractor with lock on Cable length 3m Product type Power tools (accessories) EAN 5056485700589 In the box 1x JCB 1700W demolition hammer, 1 x side handle, 1 x pointed chisel 30hex x 410mm, 1 x flat chisel 30hex x 410mm, 1 x spare pair of carbon br ...

LICENSE TO BE RENEWED Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-51471-150

FRIEDRICH DECKEL SOE – Optical Single-Lip Tool & Cutter Grinder Manufacturer: Deckel Model: SOE Machine Type: Optical Single-Lip Tool & Cutter Grinding Machine Country of Origin: Germany Condition: Used Year of Manufacture: Not specified Technical Specifications Specification Details Grinding Spindle Speed 4,500 rpm Grinding Motor Power 0.55 kW / 0.75 HP Motor Speed 2,800 rpm Grinding Wheel Dimensions 100 × 50 × 20 mm Tool Clamping Diameter 0.5 – 18 mm Maximum Tool Diameter with Special Holder 25 mm Lateral Adjustment 10 mm in both directions Longitudinal Adjustment 40 mm Maximum Relief Angle 45° Indexing Head Fine Adjustment 15 mm Indexing Positions 12 Compatible Taper Collets MT1, MT2, GA Compatible Taper Adapters MT1, MT2, MT3 Optical Projector Magnification 8× (optional equipment) Microscope Magnification 20× (optional equipment) Machine Dimensions (L × W × H) 660 × 570 ...

DEBOTEC A-50 professional mixer/mixer for butchery, delicatessen and food processing applications. Functional machine, entirely designed for professional use and equipped with a large stainless steel tank with mechanical mixing system. Features: • Brand: DEBOTEC • Model: A-50 • Year: 1997 • Manufacturing number: 1059 • Capacity: approx. 50 kg • Stainless steel construction • Large stainless steel mixing tank • Tilting tank for easy loading, working and unloading • Heavy-duty mixing blades/arms • Transparent safety protection • Locking and retaining protection system • Power supply: 220–380 V • Three-phase • Frequency: 50 Hz • Power: 0.37 kW • Amperage: 1.2–0.67 A • CE marking • Professional Spanish manufacturing • Functional machine Ideal for the homogeneous mixing of meat, stuffings and preparations for the manufacture of sausages and sau ...

Combination lot consisting of 2 classic Fordson diesel tractors: 1x Dexta and 1x Super Dexta. Both tractors are rear-wheel drive and equipped with a manual gearbox, rear PTO and hydraulic linkage. The Super Dexta has a reading of 3,677.1 hours; The accuracy of this was not checked. Both tractors do not start and could therefore not be further tested for their operation. They are offered in their current state as restoration objects, ideal for enthusiasts, collectors or as a source of parts. There are clear signs of age, use, weather and rust. Condition and completeness as visible in the photos. When picking up, take into account the non-starting condition of both tractors. Offered together exclusively as one combination ticket. Auction-ID: A3-46114-22035

John Deere 6310 agricultural tractor with John Deere 640A front loader and hydraulic manure fork/grab attachment. Registration no.: AIBV-714. Identification no.: L06310V359043. Permissible gross weight: 8,000 kg. 4WD tractor with enclosed air-conditioned cab, rear three-point linkage and hydraulic connections. Used condition with age- and use-related wear. Offered in its current condition as shown in the photographs. Functionality, hours and completeness have not been independently verified. Auction-ID: A1-51215-10

ATLAS VON DER WEHL WEHL ZA 18 K two-axle drawbar tipper trailer, year 2007. Serial no.: W090072187LW03289. Permissible gross weight: 18,000 kg; permissible axle load: 9,000 kg per axle. High-sided tipping body, pneumatic braking system and drawbar coupling. Body and chassis show signs of use, weathering and surface corrosion. Offered in its current condition as shown in the photographs. Functionality, roadworthiness and completeness have not been independently verified. Auction-ID: A1-51215-13

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Cat. No. 11-3015 in very good condition Two-phase decanters, also known as sewage decanters, are used for the continuous separation of solids from liquids with a high solid content. Due to the high speed of the drum, the solid particles settle on the drum wall and are continuously transported by the built-in conveyor screw to the solid discharge. The almost solid-free, clarified liquid leaves the separation space via openings at the opposite end of the drum. Built: 1973, Max speed 5000 rpm Power: approx.3000 Ltr/h Specific weight of the solid in the medium slingshot max. 2.3 kg HxWxD: 95 x 220 x 130 cm Weight: 745 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scop ...

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Small blasting machine for cryogenic deburring - MEWO 42

REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact  ...

Centrimax provides used, but reconditioned centrifugal decanters (by Flottweg also as full coat screw centrifuge GEA Westfalia Separator as centrifugal decanter - or by Alfa Laval also de decanter centrifuge or decanter centrifuge known as) makes Flottweg, GEA Westfalia Separator, Alfa Laval, Sharples, Andritz etc. Thanks to a comprehensive overhaul and delivery with a mechanical warranty, you meet the highest standards of quality from supplied decanter (full coat screw centrifuge, Zentrifugaldekanter). The new SPS controls supplied with the decanter enable easy integration into the existing production process and lead to a new machine character. Centrimax provides almost all de decanter types available on the market:

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm

35 cm x 20 cm

Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type choice: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our sepa ...

; ready for operation

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.