de used for sale

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm Control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 9,4 t dimensions of the machine ca.: m Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Y-axis 610 mm Z-axis 760 mm Spindle speed 10.000 rpm Tool holder HSK 80 Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DMG DECKEL MAHO DMU 105 V Linear was manufactured in 2004. It features a robust CNC control system, HEIDENHAIN iTNC 530, and has a machine weight of approximately 12,200 kg. The required installation space is 5,700 × 4,700 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 105 V Linear vertical machining centre we have for sale. Contact us for further details.

General SKUCY002 LocationBarneveld CEcheck MakeFlottweg Main Features MaterialStainless steel Capacity1500 Ltr./Hr. Motor7.5 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter250 mm Screw length750 mm Inlet25 mm Liquid outlet15 mm Solids outlet120 x 300 mm Motor7.5 kW (460 V, 60 Hz) Max. rotor speed6000 rpm MaterialStainless steel 1.4462 (318LN) General TypeZ23-3/401 No.002.100.07 Year of construction2002 With switchcheck With switchgear( as is) Floor space1,4 m x 1,5 m Total height1,9 m Weight900 kgStarchBiotechnologyAgrochemicalsPlastic & polymersDecantersCatalysts & fillersOrganicsPaper & otherE-waste & metalAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteFlottwegIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plas ...

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Control: Dialog 11 total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3 x 4 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4200 , 70

DEMAG 420 T type 800-1450 Commande : NC4 Année : 2001 Force de fermeture : 420 T? Diamètre vis : 70 mm? Volume injectable : 1039 cm³? Pression d'injection : 1 450 bars Entre colonnes : 810 x 710 mm? Dimensions des plateaux : 1200 x 1100 mm? Épaisseur du moule min : 380 mm Quantité d’huile: 760 L Poids : 20 200 kg? Dimensions : 7,90 x 2,40 x 2,20 m

BAZ Cover Maho DMC 635V ecoline BJ 2013

Key data: 640 mm, 600 mm, 500 mm

Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions

Manufacturer/ Type: Deckel Maho, DMU 60 P hi-dyn, 5 Axis Milling Machine Year of Make: 2002 Information: Tool changer for 60 SK 40 holders, Mill Plus control, Current condition: The Y axis is out of round by 0.03mm, the machine is not working at the moment because the hard drive has to be replaced Availability: Immediately Accessories: 3D probe, machine manual

Key data: 770 KW, 1500 1/min

a used power generator MWM/DEUTZ 604 with AVK generator price engine euro 6.000,= AVK generator price euro 3.500,= ex stock LEENDE - Ned. Tel 0031 653 160178

Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg

Control Heidenhain TNC 124 Travel X/Y/Z: 500 x 400 x 400 mm Spindle speed 4,500 min-1 Tool holder SK 40 Manual rotary table with swivel axis 700 x 500 mm

As good as new ! Only 82 hours Emergency generator 410 Kva. Engine : Deutz Generator : Marelli

x-travel: 885 mm y-travel: 600 mm z-travel: 450 mm b-axis: +20/-110 ° c-axis: 360 ° spindle speed:: 18.000 U/min spindle drive: 15 kW Tool adapter: HSK-A63 table diameter: 600 mm Tools changer: 30 fach/tools chip conveyor: kW Internal cooling system: 401 bar Control: HEIDENHAIN iTNC 640 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m DMG HSC 70 – 5-Axis Machining Centre - 5-axis machining centre with linear motors - HEIDENHAIN iTNC 640 - Portal-type construction - Electrospindle with 18,000 rpm - 30-tool automatic tool changer - Probes included for tool and workpiece measurement - Internal coolant supply at 40 bar pressure - BLUM laser tool measurement system - DMG TS649 workpiece measuring probe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm control: TNC 426 table-size: 900 x 550 mm taper ISO: SK 40 speeds: 18000 U/min total power requirement: 50 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3,3 x 2,43 x 2,98 m DECKEL MAHO DMC 70 V Hi-dyn machining center featuring: 30-station tool changer Chip conveyor Oil mist filtration system Transport dimensions: 650 x 243 x 297 cm, 8 tonnes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamping - Automatic manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Working Range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual transmission with clockwise/cou ...

Key data: 640 mm, 640 mm, 640 mm

Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...

CNC Universal – Machining Center DECKEL MAHO DMU 40 eVo NEW DMG Design with track control Heidenhain iTNC 530 HSCI Year of Make: 2012 Travel: X 400 Y 400 Z 375 Speed range: 20 – 18,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 30-fold tool changer with double gripper 3 D probe Renishaw PP 60 optical Electronic handwheel Operating mode 4 Heidenhain Table Pushbutton TD 110 ( Length Measurement ) IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Direct displacement measuring system Rinsing gun for chip rinsing Rotoclear Oil mist extraction 3-Piece Height Adjustable Machine Shoes Operating Instructions Signal light 4 colour

Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, wall-mounted jib crane, lifting capacity 1000 kg -Projection: 5070 mm -Swivel range: 270° -Chain hoist: DEMAG type PK5NF -Main stroke: 5.0 m/min -Fine stroke: 1.25 m/min -Hook travel: 4300 mm -Transport dimensions: 5300/1310/H400 mm -Weight: 316 kg

Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details.

Key data: 1000 kN, 150 g/PS, 35 mm

1.0 pcs. Injection moulding machine with robot, safety fence and conveyor belt Manufacturer: DEMAG Type: ERGOTECH100/420- 430System Year of Make: 2001 Clamping force: 100 tons Spar spacing: 400 x 400 mm Screws DN: 35 mm Max. displacement: 168 cc Moulded part weight 150 g/hp Control: NC4 Equipment: -Robot, Angel, Type: W711-0174, Year of Make: 2009 -Protective fence -Conveyor belt -2 x Core Pull -Blow-out valve

Year of construction: 2007 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0º/190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Max. workpiece weight kg: 2000 Table rotation speed rpm: 500 max. torque Nm: 5600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 28/19(40/100%DC) Spindle torque Nm: 727/492(40/100%DC) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Chip-to-chip time s: 5 Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Mi ...

Tractor (Oldtimer) Deutz D30 First registration 01.07.1964 2006 Gearbox lock gone 6km/h approval (can be removed again) with cutter bar good, ready-to-use condition Rear wheels are renewed Net price ex location € 4,800,-- + VAT Sale from location D - BL Saxony-Anhalt Code No. Q67

2-deck screening machine SBM 4.8 x 1.3 m 2 Deck Heavy Duty Screening Machine 4.8 x 1.3 m  Upper deck 2x square mesh 70 mm & 2x square mesh 32 mm, clamped Lower deck plastic screens square perforation 55 mm, clamped Electric motor Base frame with tub Take-off conveyor belt (without motor!) operational condition Net price ex location 10,900,-- € + VAT Sale from location BL Thuringia Code No. Q59

New dual-sensor conveyor metal detector. Detects ferrous and non-ferrous metals (stainless steel, aluminium, copper, brass) on 1000 mm conveyor belts before they reach crushers, mills, granulators or shredders. - Upper and lower sensor, separable design for easy installation on existing conveyors - Adjustable sensitivity and interference settings - LCD control unit, dry-contact relay outputs for conveyor stop, alarm or diverter - PLC integration, optional rivet sensor, beacon and siren - Mechanical design adapted to the conveyor on site Made in Türkiye. Delivery FCA Ankara.

Key data: 1250 mm, 1000 mm, 1000 mm

Refurbished by DMG in 2011 Control: HEIDENHAIN iTNC 530 Tool holder SK50 with tool storage for 60 tools Max. spindle speed: 8,000 1/min 30kW spindle with swivelling milling head (B-axis) Infrared probes NC rotary table with pallet change Total weight: 24,000 kg Table load: 2,000 kg

x-travel: 1035 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain iTNC530 total power requirement: siehe Dok. kW weight of the machine ca.: ca.5,2 t dimensions of the machine ca.: siehe Dok. m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 pieces 2-deck screening machine Ruthemeyer 2 Pieces 2-Deck Shaker Screen Machines Longitudinal clamps Upper deck 1.2 x 1.1 m + baffle plate Lower deck 1.2 x 2.4 m Electric motor (5.5 kW ?) Base frame  1 piece with fine fraction lanyard operational condition Sale against bid from the Bavaria location Code Q23

Key data: 935 mm, 850 mm, 650 mm

Commissioning 2013 with RS 3 rotary storage tank (3 pallets) Control: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Total weight: 14,000 kg Spindle speed (max.): 18,000 rpm Number of slots in tool magazine: 60 Table load: 1,000 kg Heidenhain Infrared Probes Blum Laser Measurement 3D Quickset Air Cleaner electric handwheel

Year of construction: 2004 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Maximum workpiece size (D x H) mm: H=1600 Max. workpiece weight kg: 2000 Table rotation speed rpm: 400 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool measuring arm Mist collector Machine running times Under power: 92687 Spindle Working: 40245 Basic machine dimensions / weigh ...

A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTM ...

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, monorail trolley -Manufacturer: Demag, running gear chassis -Type: unfortunately without a type designation -Beam width: up to 155 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 250/195/H180 mm -Weight: 9.5 kg

clamping length: 170 mm centre height: 110 mm : . 3-jaw-chuck diameter: 170 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Technical specifications are based on information provided by the manufacturer or previous operator and are therefore non-binding for us. Subject to prior sale, our standard terms and conditions of business and sale apply exclusively. About us Over 400 machines in stock Over 15,000 m² of warehouse space, 70-tonne crane capacity Over 10,000 accessory items for your workshop If you are looking to sell machines, production lines, or your entire facility, please get in touch with us. You can find further offers on our website. Viewings are possible by appointment. We look forward to your visit. The Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine / DECKEL FP 33 incl. Heidenhain digital display & accessories - COMPLETE SPECIFICATIONS YOU PHOTO -Heidenhain digital display -Miscellaneous Accessories -Documentation -Crane Dimensions: LxWxH 2.5x2x2 meters / Weight 5000 KG

Ref. -No.: 10468 Manufacturer: DECKEL MAHO Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabine ...

Ref. -No.: 10659 Manufacturer: DECKEL MAHO Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

The GM 90 S unit can be adjusted to your performance data. The blower stage has been completely overhauled. If you have any questions, please feel free to contact us.

Add-on module for chocolate pouring lines. Automatic insertion of calibrated and peeled whole nuts (such as hazelnuts or almonds), biscuit pieces, waffles or decorative elements directly into the cavities of the moulds. The modules have a modular design and can be integrated into existing chocolate lines (such as the AWEMA Multi Line). Connection: 400 V, 50 Hz Power: 4000 VA Condition: well-maintained, fully functional Availability: immediately

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool lemmung, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works

Ref. -No.: 10544 Manufacturer: DECKEL Year of construction: 1990 Type of control: N/A Control: N/A Storage location: Halberstadt Country of origin: Germany Power Capacity: 1,6 / 2,0 kW Tool Taper: 20 mm Ø Space requirements: 1600 x 1350 LxWxH (mm) Feed rate: 0-350 mm / min Vertical portal passage, clamping table - lower beam cross member: 300 mm Distance table - spindle nose with vertical milling spindle: 50 mm Distance table - spindle nose with horizontal milling spindle: 450 mm Machine Height: 1950 mm Weight: 2,1 t Pre-milling spindle: 80...1000 min-1 Collets: 20 O taper bushing: Morse 1 Touch lift: 12 O Speed of the milling motor: 1400 RPM Further information: - Optical testing device - Pre-milling spindle - Model milling device - Rotary table - Inclined spindle - Mirror image milling device - Reduction and enlargement device - Roller engraving devices - Machine vice hydraulic clamps ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 kW Torque: 130 Nm tool taper: BT 40 DIN 69872 work table:: table surface area: 1.250 x 700 mm max. table load: ca. 500 kg table diameter: 700 mm T-slots: 11x 14 x 63 mm max. table speed: 15 min/-1 tool magazin:: number of toolpositions: 32 (2x 16) pos. tool taper: BT 40 max. tool diameter: 80 / 130 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8,0 kg feeds:: feed speeds: 20 - 15.000 mm/min rapid traverse: 12 m/min total power requirement: 30 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 4,0 x 3,0 x 2,5 m Documents: swarf management system: Coolantsystem: NC-rotary table: elektr. hand wheel: Automatic Tool Changer: tool setting: CNC - M ...

x-travel: 980 mm y-travel: 630 mm z-travel: 630 mm Control: iTNC 530 total power requirement: 10 / 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 442,5 m Equipment: Electronic handwheel Operating mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-position tool magazine Rigid table 1250 x 700 mm Chip conveyor Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: Heidenhain iTNC 530 tool taper: SK 40 total power requirement: 34 kVA weight of the machine ca.: 4810 kg dimensions of the machine ca.: m Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 280 mm

Various tables for DECKEL milling machines and others

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

Key data: 900 mm, 500 mm

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

Machine : Vert. Milling head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

Used compressed air refrigeration dryer MTA DE225 for drying compressed air in industrial compressed air systems. Manufacturer: MTA S.p.A. Type: DE225 Year of Make: 2006 Serial Number: 2200091067 Voltage: 400 V Phases: 3 Frequency: 50 Hz Installed power: 6.0 kW Maximum current consumption: 11.0 A Degree of protection: IP22 Refrigerant: R134a Refrigerant capacity: 4.72 kg Maximum permissible refrigerant pressure low pressure side: 22.6 bar Maximum permissible refrigerant pressure high-pressure side: 26.0 bar Maximum operating pressure compressed air: 16 bar Maximum operating temperature compressed air: 70 °C Ambient temperature: +5 to +50 °C Sound pressure level:

Offer 26195 Operating hours 63733 h - Operating pressure 8 bar - Delivery rate 5.93 m³/min - Drive 400 V / 37 kW - Motor speed 3000 rpm - Suction pressure 1 bar - Space requirement approx. W 1000 x H 1450 x D 1300 mm - Weight approx. 560 kg