de used for sale

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information.

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

This DENSO RC8A was manufactured in 2018. It features a robotic cell with two SCARA robots, each capable of a maximum reach of 550 mm and a Z-axis stroke of 320 mm. The system includes a controller RC8A, offline programming software, and self-diagnostic functions. Ideal for applications requiring high-speed robotic manipulation. Contact us for more information about this machine.

This 5-axis TORNOS DELTA 20/4 was manufactured in 2010. It features a FANUC control system, a 3m ROBOBAR bar feeder, and a chip conveyor. Capable of handling a max diameter of 20mm and a length up to 170mm, with spindle speeds up to 10000 rpm. Ideal for precision turning, consider the opportunity to buy this TORNOS DELTA 20/4 horizontal turning machine. Contact us for more information about this machine.

On behalf of the customer, we offer an EOS M280. The system is in good overall condition; the laser has been replaced and currently operates at 367.6W at 100% output (measurement from January 2026, Primes laser power meter). In terms of performance, only conditionally suitable for aluminum and copper materials., - Laser hours approx. 34,000 h (February 2026), - Machine hours approx. 45,700 (February 2026), - PSW version 3.7, - Machine comes with parameter editor for freely setting the parametersOther material licenses on the machine:, - GP1 Surface (20µm), - In718 40µm, - MP1 50µm, - MS1 40µm, - MS1 50µm, - GP1 Start 40µm, - 200° heating installed, - no leaks (low gas consumption and low O2 content during the process

This TORNOS DECO 20A was manufactured in 2006. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can accommodate up to 21 fixed and 15 rotating tools. It includes an IEMCA BOSS 332 E/R loader and a CONVEYORS IND. ASS. TMTPF 2294 conveyor, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 20A Swiss type turning machine. Contact us for more information about this machine.

Number of boring spindles: 6 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DECKEL MAHO DMU 60 E vertical machining center was manufactured in 1999. It features a chip conveyor and travels of 600 mm in the X-axis, 525 mm in the Y-axis, and 500 mm in the Z-axis. Ideal for those looking to buy this DECKEL MAHO DMU 60 E vertical machining center. Contact us for further details regarding this vertical machining center.

This 4-axis DECKEL MAHO DMC 63 H was manufactured in 2002. A robust horizontal machining center, it features an installation weight of 18 tons and dimensions of 6.6m x 6m x 3.2m. Currently, the system does not boot up, displaying an error message with no other known damage. Consider the opportunity to buy this DECKEL MAHO DMC 63 H horizontal machining center. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DC 100V was manufactured in 1995. It features a Siemens 840D control, a machine table of 1250 x 800mm, and travels of 970 x 755 x 490mm in X, Y, Z axes. With a maximum speed of 18,000 rpm and 24 tool positions, this vertical machining centre is still in production. Consider the opportunity to buy this DECKEL MAHO DC 100V vertical machining centre. Contact us for more information.

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Condition: good, demo machine: Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information.

This 5-axis DECKEL MAHO DMC 60T was manufactured in 2004, featuring a Heidenhain iTNC 530 control unit and a spindle speed of up to 12,000 rpm. It includes a pallet changer with 2 pallets, a chip conveyor, and external workpiece cooling. Ideal for complex machining tasks, the DECKEL MAHO DMC 60T machine we have for sale is a robust addition to any workshop. Contact us for further details regarding this Machining Center.

This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine.

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions

This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information.

Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26 ...

Milling machine Deckel FP 4 BJ 1985

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible.

General SKU225P206 LocationBarneveld MakeGlatt Process Technology GmbH (DE) TypeTR 80 No.4945 Main Features MaterialStainless steel Motor0.5 KW Specified Features - Sieve granulator MaterialStainless steel Granulating sievecheck Rotor sizesdia.75mm Sieve sizesdia.80mm Sieve perforationraps 0,8 mm With hopperdia.300mm Inletdia.80mm Outletdia.100mm Motor+/- 0,5 KW (ex) With variable speed drivecheck Speed(675/2890 rpm) Information Year of construction1988 Mounted on stainl. st. framecheck Floor space1,2x1,0 M Total height1,8 M Weight400KG ATEX compatiblecheckSieve granulatorsGlattSieves > Sieve granulatorsBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

x-travel: 660 mm y-travel: 500 mm z-travel: 600 mm table surface area: 630 x 500 mm spindle taper: SK 40 spindle turning speed range: 20 - 6.300 U/min feeds: 30 m/min control: PHILIPS CNC 532 internal coolant system feed: 40 bar total power requirement: 50 kW weight of the machine ca.: 13,3 t with rotary pallet changer and hydr. swivelling head (horiz./vert.) Accessories: chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 650 mm, 550 mm

Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little

gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2

General SKU900WP080 MakeDeltatherm (D) TypeWP 412/15 Year of construction2001 LocationBarneveld Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:Water Electric capacity12 kW With coolingcheck TemperatureMax 150 grd With pump40 ltr/min Information Extra Specificationselectrical power 12,8 kW , medium: Water, SN 7/8032Temperature control unitsDeltathermHeat exchangers > Temperature control unitsBrand > Deltatherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU252T444 MakeAerzen LocationBarneveld CEcheck TypeDelta Hybrid D 62 S/DN 200 Pressure Pressure buildup0.6 Bar Main Features Capacity51.06 m3/Min Motor75 KW Pressure0.6 Bar Specified Features - Blower Blowercheck Capacity51,06 m³/min Motor75 kW InletDN 200 OutletDN 200 Information No.61-359839-00 Year of construction2012 Floorspace1,7x2,1 m Total height2,1 m Extra SpecificationsIntake temperature: 20 °C Final temperature: 82 °C Compressor speed: 7054 rpm Motor speed: 2980 rpm Pressure difference: 0,600 bar Oil quantity: 8,70 Ltr. BlowersAerzenBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

General SKUR0449 MakeAZO GmbH & Co KG (D) LocationBarneveld TypeD128/D350 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel Information No.1097198 Year of construction2012 Floorspace1,0x0,8 M Total height0,6 M Weight100 Kg Extra SpecificationsThis docking device creates a connection with low dust levels between two system components Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2003 Control: Heidenhain TNC 530 X: 810 mm Y: 650 mm Z: 650 mm Table: 1250 x 710 mm Magazine for 30 tools SK40 clamping and tools Internal cooling through the spindle center 40bar External emulsion tank with separator 600l. Max spindle speed 12000 rpm Ethernet interface for networking the machine Internal/external air pressure cooling New motherboard with SSD - the machine loads programs quickly and can use rapid traverse machining New spindle in 8/2023, from exchange 300 hours Find more here - / Contact us at -

CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2002 Control: Heidenhain TNC 430 X: 900 mm Y: 650 mm Z: 600 mm Spindle speed: 8000 rpm Spindle taper: SK40 Tilting spindle, can be folded and used as a horizontal boring machine Table: 1100 x 650 mm Tool magazine: 24 positions Through spindle cooling 40 bar Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - / Contact us at -

Tool milling machine DECKEL FP 2 LB 3 axis digital display maintained original condition - 3-axis digital display - Travel X/Y/Z: 795 × 300 × 400 mm - Automatic feeds and rapid traverses in all 3 axes (18 stages) - Spindle speeds: 40–2000 rpm (18 steps) - Horizontal and vertical milling equipment - ISO 40 tool holders - Table clamping surface: 1000 × 440 mm - Swivelling vertical head with drilling quill - Coolant device - Various tool holders - Documentation available L×W×H 2.5×2.4×1.8 meters / Weight 2200Kg

Tool milling machine DECKEL FP 2 LB from university in well-maintained original condition -3 - Axis digital display "ACURITE" -Travel X/Y/Z 795x300x400mm -Automatic feeds / rapid traverses in all 3 axes (18 pieces) -Spindle speeds 40-2000 rpm (18 pieces) -Horizontal + vertical milling device - ISO 40 - Tool holders -Table clamping surface 1000x440mm -Table clamping surface with additional table 1000x700mm -Vertical head swivel with drilling quill -Coolant device -Various tool holders -Machine light -Documentation Dimensions: LxWxH 2.5x2.4x1.8 meters / Weight 2200Kg

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible.

Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement.

An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible.

This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine.

General SKU212T524 MakeGallzeiner LocationBarneveld CEcheck TypeDekanter Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity177 Ltr. (netto: 160 Ltr.) Used onfluid InletDN25 Liquid outletDN25 (3x) Mounted on stainl. steel framecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.8819-M Year of construction2016 Floorspace1,8x0,9 m Total height1,6 m Weight350 kg Extra SpecificationsSuitable for liquid group: 1 Max temp. : 100°C Working pressure: -1/1 Bar Test pressure 1.6 Bar/ 20°C SeparatorsGallzeinerCentrifuges > SeparatorsBrand > Gallzeiner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information.

There are two used DEBAG Monsun 672 ovens (year 02/2019) for sale on behalf of a customer. The ovens are functional and will be available from April 2026. Fuel Type: Natural Gas Price on request.

This 5-axis DECKEL MAHO DMP60S was manufactured in 2003, featuring a vertical machining center with X, Y, Z travels of 760 mm, 460 mm, and 560 mm respectively. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine.

This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It features a Heidenhain iTNC 530 control, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine offers a tool magazine with 32 positions and a robust coolant system with a 280-liter capacity. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 70 eVo machine we have for sale. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information.