de walt used for sale

RECON Part number: 0401 6678 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 0215 4713 / 0215 5198 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 0215 4709 = 0215 5197 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Used Machine

2 pieces of crane bottles

Gardner Denver Gas Booster Hours: 0 Year: 2014 Includes Danfoss Frequency Regulator Lovely Little Unit.

Complete engine Deutz BF6M Diesel Type BF6M1013EC 153KW /1500rpm Complete motor with water cooler and intercooler, turbocharger, air filter, starter, flywheel, regulator etc. New condition with approx. 400 operating hours from an emergency generator Motor is built on a console and can be introduced. BF6M 1013 EC BF6M 1013EC BF6 M1013EC BF6 M 1013EC BF6 M 1013 EC BF 6M1013EC BF 6M 1013EC BF 6M1013 EC BF6M1013 EC Special price

Frame Engine I With L-ringen

Fine drilling head for lid fraes machine, probably FP2, SK40, little used condition. Special price

Special charging device with pulse device. Weight approx. 250kg! 48Volt 150 ampere. With this loader, you can regenerate old batteries. Charging for forklift battery suitable for 24 cells 48 Volt 150 Ampere very good condition First picture similar! second and third picture of the original! More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please please ask. Varta Belatron Deta Special price

In very good condition

Ready to ship

24Volt 120 Ampere! Very strong charging for large batteries! Charging for forklift battery suitable for 12 cells 24 Volt 120 Ampere good condition More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price

RECON ON USED IN STOCK

Ready to ship

ready to ship

Immediate delivery

Roller conveyors, 50 and 58cm wide, - used - : Price / meter (net) from location: 65.-€, dismantled and loaded Matching curves 90 degrees: price 450.-€ (net) / piece Curves: approx. 40cm wide 90 degrees: price 350.-€ (net) / piece Price per foot: 50.-€ (net)! Manufacturer: Siemens Dematic Year built: unknown Type 1. approx. 50 to 100m Elementbriete: approx. 50cm Roll length approx. 43cm Roll width: approx. 5cm Roller spacing: approx. 6cm Element length: mainly 3m - but also some shorter pieces Type 2: - approx. 40m Elementbriete: approx. 58cm Roll length approx. 53cm Roll width: approx. 5cm Roller spacing: approx. 2cm Element length: 2m / 2.56m / 3m Condition: good Available: now Location: Frankenberg Camp (Saxony)

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 80/190 Power connection 380Volt Power 80 Volt 190 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 131cm Width 55cm Depth 40cm Weight 180kg Ready to use Special price

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 50/80 Power connection 380Volt Power 80 Volt 50 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 110cm Width 55cm Depth 40cm Weight 80kg Ready to use Special price

CRANKSHAFT ARE STANDARD

READY TO SHIP

Lid FP 2 NC Used machine (good condition) Control type NC Built in 1987 Operating hours n/a Price 9,900 € net plus VAT Dimensions 1325 x 1315x 1845 Weight 1450 kg Location 35708 Haiger The machine was part of a training workshop, it is made of 1st hand and has few hours of operation. Travel routes; x = 300, Y = 300, Z = 400 mm Speed range: 31.5 - 3150 rpm DESCRIPTION CNC milling machine lid FP 2 NC year: 1987 Control: 3-D web control dialog 4 Can also be operated manually via handwheels Travel paths; x = 300, Y = 300, Z = 400 mm Voltage: 380 volts Speed range: 31.5 - 3150 rpm power, 1.6/ 2.0 kW WZ recording, SK 40 Hydraulic Tool Clamping Rigid Angular Table Table Size: 620 x 390 mm Electronic handwheel Coolant device Machine light Spray protection cabin Accessories: operating and programing instructions, electrical circuit diagrams, WZ-holders Weight: 1450 kg Dimensions: L  ...

CNC toolmill cover FP 3 NC Dialog 11 Used machine (very good) Control type Cnc Built 1990 Hours K.a. Dimensions 1800x1700x2000 Weight 2000 kg Location Haiger Description Universal tool milling machine of the brand lid suitable for tooling, fixture construction, training as well as mold making • Travel distances: 400x400x400mm • Control: Dialog 11 Technical data • Control CNC Dialog 11 • Table 600x400mm • Longitudinal path (X,Y,Z axis) 400x400x400mm • Tool changer no • Tool holder: ISO 40 • Vertical spindle speeds: 31.5-3150rpm • Feeds 2-3600mm/min • Connection 50 Hz 3x 380V • Spindle motor 3.4KW

Ready to ship

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

Lid FP 1 in very nice condition x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Digital display Z-502 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Manufacturer: Deltax Holder: Hydraulic holder Dimensions (L x W x H): 2010 x 902 x 1500 mm Knife length: 610 mm Number of strokes at 1/4 opening: 40 cuts at quarter opening Number of strokes at full opening: 12 cuts at full opening Measuring opening: 330 mm Cutting force: 206 tons Drive: 11 kw/32 CEE plug Weight: approx. 2250 kg Deltax_DTX600S with hydraulic holder (New machine) The DTX 600S has 20% more cutting power than the standard Deltax DTX600. This was achieved by installing a larger cylinder and using a smaller second pump. A larger first pump is used to maintain the same cutting speed. All other modifications are used to amplify the machine to handle the additional power. The weight gain due to the reinforcement modifications and the larger pestle is about 250 kg. Alternatively: Deltax DTX600 Difference Cutting force: 172 tons | Weight: 2000Kg | All othe ...

with (wide) swivelling vertical head table size 300 x 1,430 mm table paths: laengs (X-axis) 1,000 mm persive (Z-axis) 520 mm quer (Y-axis) 360 mm installation height under fraes spindle approx. 500 mm Extension of the fraesspindle min./max. 350 mm spindle holder SK 40 spindle speeds 25 - 1,200 rpm feed/rapid speed 12-900 mm/min spindle drive approx. 3 kW Total drive 3.4 kW - 380 V - 50 Hz weight 2,400 as kg;

Wire diameter range: 8.0 - 16.0 mm section sections: up to 14,500 mm feed speed: up to 50 mtr/min machine has been repaired, repainted, repainted + new electrics; ready for use

wire diameter range: 8,0 - 16,0 mm cutting length: up to 14.500 mm wire feeding speed: up to 50 mtr./min. Machine is been repaired, tested, new painted, + new Electric ; ready for operation

Carrying ability: max. 2,000 kg. Coil Inner Drm. max. 1,000 mm Coil Outdoor Drm. max. 1,200 mm Coil Width: max. 500 mm; ready for use

Wire rod range: 2.0 - 6.0 mm mesh width: 15 - 80 mm Web width: max. 2,000 mm; ready for use

wire diameter range: 2,0 - 6,0 mm mesh width: 15 - 80 mm working width: max. 2.000 mm; ready for operation

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Used dough extruder / noodle machine DEA, Type: Troffiatrice 4.F. - for Troffie and Strozzapreti - several product sizes - easy handling - frame in stainless steel - condition: good, ready for operation El. Connection: 380 / 220 V, 50 Hz Capacity: 45 kg / h The machine is in a good condition and ready for operation. Inspection and test run are possible at every time.

Dosing system / filling plant Make Derichs in a very good used and functional condition. Fully automatic filling system, completely stainless steel, 200 L hopper, digitally controlled (Siemens OP7), programmable, integrated scale system, filling by weight input. The system is dismantled and ready for dispatch.

2 pallets, 108 wkzg., BJ 1988, interior cooling, with PS8, various clamping means - see pictures

1 pallet with various geared motors - see picture type BG10-11/D06LA4-TF BAUER Danfoss BG10-11/D06LA4-TF Gearboxnord SK33F-90L/4Bre16 (2 stu)

DECKEL GK21 Engraving frause machine More: DECKEL G1L Engraving fraese

To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . . Control repair needed! Details on sale!

Mannesmann Demag compressor General repair 2004 Flow rate: 39.5 M ³/min, 2150 m ³/h Suction pressure: 1 bar Max pressure: 10 bar Speed: 1500 rpm Engine power: 250kW Pressure: 8.5 bar

Dear's Sale, used 2 complete engine Deutz SBA8M528 Also, cover, piston, liner, conrod new/used, fuel pump, 8cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

DEAR'S SALE, DEUTZ 6M540 2 CRANKSAFT STD 1 BLOCK COVER, LINER, CONROD, PISTON ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

various rope seam from 2 to 10 t; 2 pcs. hook bottles 25 t Next: cat SOWITSCH 2 t Steel Elektus R 12