de walt used for sale

Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details.

Decoiler of construction steel coils up to 5tons. Machines worked just less than one year.

Tool milling machine Deckel FP 2 / 3-axis digital display Heidenhain ND 780 -Travel paths X/Y/Z: 450 x 200 x 400 mm -Table clamping surface 700 x 350/tilt-swivel rotary table -Speed range: 40–2000 rpm -Feeds & rapid traverses in all three axes -Tool holder: ISO 40 -Vertical/horizontal milling device with vertical sliding head -Coolant device -3-axis digital display: Heidenhain ND 780 -Documentation -Chip tray -Various tool holders -Collets Dimensions: LxW xH 1.5x1.7x1.8 meters / Weight 1600Kg

Defects: - 1 Brake defective

Key data: 1000 KW, 1500 1/min

Deutz/MWM TBG 620 V12k Maker: MWM/Deutz Type: TBG620 V12k Fuel: Natural gas Power rating: 1000 kW Year of manufacturing: 2000 Alternator: (0,4 kV, 1175 KVA 50HZ, 1500 RPM) Running hours: 40 000 Turbocharger: ABB TPS 52 Engine control system: TEM-EVO-1 SCOPE OF DELIVERY: Engine Alternator Base frame Heat exchanger Transformer (1250KVA, 20/0,4kV) Control panel Gas street History: Well maintained set, good condition. All regular service has been done by local OEM company. Engine stopped since 2022 , April.

Hours: 1,596 h Power: 138 hp (103 kW) 4-cylinder engine Continuously variable transmission (Vario/IVT) Maximum speed: 40 km/h Electrical control units (hydraulics) Weight: 4,750 kg Tyres: Front Tyre: 540/65 R28 BKT Rear Tyre: 580/70 R38 BKT

Additional title: Slewing crane, Maximum load: 2000 kg, Reach: 4 m , Lifting height: 3 m, Length: 4,00 m, Height: 4,61 m

Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...

Engine Brand: DEUTZ, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 999999 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 762 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 738 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 1065.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-a05i450710-generator- 738-kva-used/612, , = More information =, , Empty weight: 9.500 kg, Type number: A05I450710 Generator 738 KVA

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

- Technical data: Engine power: 88 kW / 118 hp Operating hours: only 1,566 Maximum speed: 40 km/h PTO speeds: 540 / 540E / 1000 Weight: 4,800 kg - Tyres: Front: 420/85 R24 Rear: 460/85 R38 - Equipment & Extras: All-wheel drive On-board computer Electronic Hoist Control (ELC) Front loader Front loader attachment frame Front axle suspension Hydraulic trailer brake Comfort cab Cab suspension Air conditioning Powershift shuttle (clutchless) Radio Rotating beacon Towbar

x-travel: 400 mm y-travel: 400 mm z-travel: 375 mm total power requirement: kW weight of the machine ca.: 7150 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm control: Heidenhain TNC 430 spindle speed:: 10000 U/min power capacity - milling spindle: 13/9 kW feed: 30 m/min rapid traverse: 30 m/min no. of workpieces in the magazine: 24 Stück tool taper: SK 40 table surface area: 800 x 500 mm table load: 0,5 t Overall size: 1,9 x 3,3 x 2,6 mm weight of the machine ca.: 4500 kg Used vertical machining centre in good condition. - external eletronic hand wheel - coolant system - servo tool magazin The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used MTA DEIT165 Refrigeration Dryer 16.50 m3/min 16 bar Year of construction 2016

Offer 25348 Technical data: - 15 pieces 300 x 200 x 100 mm - left + right versions - Total weight approx. 250 kg

Drycooler Cabero -Type: S-GC/DED 095 KA/2X4E -Cooling capacity: 350-400 kW -Number of fans: 8 x 910 mm -RPM: 510 -Dimensions: 6100 x 2360 x 2450 mm -Volume: 127.15 L -Quantity in stock: 6 -Condition: Used in very good condition, ready to work

Year: 2020 Operating hours: 8,000h Reference : DE388-E1700C Screw diameter: 65 mm L/D ratio: 20 Injectable volume: 929 cm3 Injectable weight in PS: 846 g Injection pressure: 1890 bar Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 kW Distance between tie bar: 750 x 750 mm Mold thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores 3 blow guns EUROMAP 67

Year: 2021 Working hours : 250h Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 g Injection pressure: 1890 bar Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 kW Distance between tie bar: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67

General SKU283W442 MakeKrämer LocationBarneveld CEcheck TypeE5000S-Wipc-1200/CEIA Main Features MaterialStainless steel Dia/Width40 mm Specified Features - Metal detector Vibro sieve80000-6300000 tablets/hour Inlet471 mm Metal detectors MaterialStainless steel 1.4404 (316L) Metal detectorcheck Inlet471 mm Capacity80000-6300000 tablets/hour Information No.8.1165 Year of construction2013 Mounted on wheelscheck With switchcheck Floorspace2,0x1,20 m Total height2,20 m Weight370 kg ATEX compatiblecheck Extra SpecificationsDeduster: Outlet height 1334 mm. inlet height 471 mm. conveyor height 863 mm. min/max diameter tablet 3-35 mm. min/max capsule size 14,3-26 mm. dedusting path 15.5 m. Allen Bradley touchscreen control. diverter and inspection window, Helix with integral highly efficient washing nozzles, Ceia metal detector, type THS/PH21N dimensions 100x40 Other p ...

General SKU256W336 MakeDeller Type40m2 No.39588/2 Year of construction2017 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface40 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Verticalcheck Heating surface40 m2 Tube capacity550 l. Tube diameter25 mm Tube length2535 mm Max. temperature0°C/+200°C Shell capacity265 l. Shell diameter600 mm Shell length2750 mm Max. temperature0°C/+200°C Shell connectionsDN250 Information Floorspace0,80x0,80 m Total height3,10 m Weight1150 kg CEcheck Extra Specifications- multi-pass systemCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other p ...

General SKU283W443 MakeKrämer LocationBarneveld CEcheck TypeKD7075CEIA Main Features MaterialStainless steel Dia/Width40 mm Specified Features - Metal detector MaterialStainless steel 1.4404 (316L) Metal detectorcheck Electric capacity100-240 volt Tunnel sizes100x40 mm Inletcheck Capacity816000-6300000 tablets/hour Information No.KD7075-0004 Year of construction2015 Mounted on wheelscheck With switchcheck Floorspace1,70x0,70 m Total height2,0 m Weight370 kg ATEX compatiblecheck Extra SpecificationsDeduster: Outlet height 1334 mm. inlet height 471 mm. conveyor height 863 mm. min/max diameter tablet 3-35 mm. min/max capsule size 14,3-26 mm. dedusting path 15 m. touchscreen control. diverterand inspection window. Helix with integral highly efficient washing nozzles, Ceia metal detector, type THS/PH21N-X3D-0002, dimensions 100x40 Other pharmaceuticsMetal detectorsS ...

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) Information Floor space1,7x0,7 m Total height1,2 m Weight800 KgDiscountHammer MillsEngelsmannDiscountMills > Hammer MillsBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU319N469 LocationBarneveld MakeDVA Deutsche Vakuum Apparate TypeRWN 1200-Z Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Motor2.5 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface1,0 m² Capacity500 l (750 l brutt) Vessel sizesø 1300 x 700 mm Plate sizesø 1300 mm Solids outletScrew ø100mm Liquid outlet50 mm With jacketcheck (15 l) Max. temperature120 °C With stirrercheck Motor2,5 kW (380 V, 1415 rpm (Ex)) Stirrer speed± 30 rpm Stirrer can be liftedcheck hydraulic MaterialStainless steel 1.4581 (348) Information Mach.No.132 527 10 Year of construction1983/94 Mounted on framecheck Floorspace2,5 x 2,5 m Total height3,5 m Weight2500 kg ATEX compatiblecheckCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleo ...

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDiscountDecantersGEA WestfaliaDiscountCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2022, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whiche ...

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2023, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whiche ...

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2023, Model year: 2024, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, o ...

x-travel: 500 mm y-travel: 500 mm z-travel: 420 mm Control: Heidenhain / Millplus total power requirement: 35 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of Make: 2010 Engine power: 70 kW / 94 hp Operating hours: only 1,050 hours Maximum speed: 40 km/h Equipment & Technical Data: PTO speeds: 540 / 540E / 1000 4-cylinder engine All-wheel drive ELC electronic hitch control Front loader Sprung front axle Hydraulic trailer brake Comfort cab with air conditioning Powershift shuttle (clutch-free forward/reverse gear) Radio Rotating beacon Tyres: Front Tyre: 420/70R24 Rear Tyre: 480/70R38 Net weight: 4,390 kg

Year of Make: 2004 Engine power: 88.4 hp / 65 kW Hours: 2,266 hours Transmission: 40 km/h manual transmission Engine: 4-cylinder turbo diesel engine Facilities & Highlights: Four-wheel drive tractor 2 mechanical control units Sauermann towing jaw with height-adjustable hitch PTO: 540 / 1000 rpm Radio Air conditioning Tyres: Front Tyre: Firestone 280/85R28 Rear Tyre: Firestone 13.6R38 Net weight: 3,620 kg

Year of Make: 2013 Operating hours: only 1,238 hours Engine power: 139 kW / approx. 190 hp Transmission: Powershift Maximum speed: 40 km/h Technical equipment: 6-cylinder engine All-wheel drive On-board computer Pneumatic system ELC electronic hitch control Load-Sensing Hydraulics Hydraulic steering Clutchless shuttle Comfort & features: Comfort cab Cab suspension Air conditioning Radio Sprung front axle Front equipment: Front linkage Front loader Front loader mount PTO: 540 / 540E / 1000 / 1000E rpm Tyres: Front Tyre: 540/65R30 Rear Tyre: 650/65R42

Width approx. 68cm Height approx. 64cm Depth approx. 72 cm Seat height approx. 43cm Seat depth approx. 50cm Leather Cream Auction-ID: A7-46320-96

Width approx. 68cm Height approx. 64cm Depth approx. 72 cm Seat height approx. 43cm Seat depth approx. 50cm Leather Cream Auction-ID: A7-46320-95

Width approx. 68cm Height approx. 64cm Depth approx. 72 cm Seat height approx. 43cm Seat depth approx. 50cm Leather Cream Auction-ID: A7-46320-93

Width approx. 68cm Height approx. 64cm Depth approx. 72 cm Seat height approx. 43cm Seat depth approx. 50cm Leather Cream Auction-ID: A7-46320-94

Width approx. 135cm Height approx. 64cm Depth approx. 72 cm Seat height approx. 43cm Seat depth approx. 50cm Leather Cream Auction-ID: A7-46320-97

Te Coop: Endress & Hauser Walter Contacters HTA 423

Te Coop: Endress & Hauser Walter Contacters HTA 380

According to photos, weight estimated Auction-ID: A1-45666-29

According to photos, weight estimated Auction-ID: A1-45666-30

Auction-ID: A1-40418-474

Vibratory dryers See pictures Tank outer diameter 1500 mm Container diameter/ container height 1500 / 500 mm Speed range 1500 rpm Operating voltage 380 V Drive power 18 kW Volume 300 litres Machine weight approx. 1.2 t Dimensions L x W x H 1.5 x 1.6 x 1.6 m

Walter Knoll Cantilever Chair Jason Leather Black Auction-ID: A7-46320-47

Walter Knoll Cantilever Chair Jason Leather Black Auction-ID: A7-46320-46

Walter Knoll Cantilever Chair Jason Leather Black Auction-ID: A7-46320-48

Lot of inserts consisting of a mixed stock of different inserts in original packaging. Included are different manufacturers, geometries and ISO grades. Partly unopened, partly opened packaging. The item is handed over in its entirety as shown. Content (excerpt from visible brands/types): Sandvik Coromant – numerous ISO plates (PMKNSH), various geometries and grades (e.g. 1044, 12055164, 880-05 06 05H-C-LM, etc.) Walter – ISO plates, including WXP45 and other grades Wohlhaupter – inserts for fine boring tools (XOMT12T308, WHC102 and others) Korloy – various milling and turning inserts Wetec / JD-Tools – ISO plates of various geometries Other manufacturers such as Innotec, Nine9 etc. General features: mixed stock of indexable inserts many original packaging available partly full, partly opened packs Manufacturer mix, mainly branded goods Condition: mostly unused (visible), indiv ...

Pressure vessel / material pressure vessel Walther MDG 60 – Lot of 4 units consisting of 4 material pressure vessels with agitator for coating and painting applications. Manufacturer Walther Pilot, type MDG 60 or similar. The tanks are equipped with an electric agitator, pressure control, pressure gauge and connections for material and compressed air supply. Typically used in paint shops, coating systems or dosing systems. The four tanks are identical in construction, but some with slightly different fitting designs. Condition Machines from production plant. Sale as shown. Type: MDG 60 Manufacturer: Walther Spritz- und Lackiersysteme GmbH Year of construction: 2011 Operating pressure: 6 bar Container volume: 63.6 l Net capacity max.: 58.6 l Temperature range: +10 to +50 °C Material: Galvanized steel / Perbunan Ex marking: II 2G Fluid group: 1 Auction-ID: A7-46417-382

Vibratory dryers See pictures Tank outer diameter 1500 mm Container diameter/ container height 1500 / 500 mm Speed range 1500 rpm Operating voltage 380 V Drive power 18 kW Volume 300 litres Machine weight approx. 1.2 t Dimensions L x W x H 1.5 x 1.6 x 1.6 m Auction-ID: A7-46460-427

Lot of inserts consisting of a mixed stock of different inserts in original packaging. Included are different manufacturers, geometries and ISO grades. Partly unopened, partly opened packaging. The item is handed over in its entirety as shown. Content (excerpt from visible brands/types): Sandvik Coromant – numerous ISO plates (PMKNSH), various geometries and grades (e.g. 1044, 12055164, 880-05 06 05H-C-LM, etc.) Walter – ISO plates, including WXP45 and other grades Wohlhaupter – inserts for fine boring tools (XOMT12T308, WHC102 and others) Korloy – various milling and turning inserts Wetec / JD-Tools – ISO plates of various geometries Other manufacturers such as Innotec, Nine9 etc. General features: mixed stock of indexable inserts many original packaging available partly full, partly opened packs Manufacturer mix, mainly branded goods Condition: mostly unused (visible), indiv ...