134,861 used machines on RESALE, but how to find them? Machine Search
Key data: 1000 kN
Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors ...
Key data: 800 kN
Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 2100 kN
Sumitomo Demag Systec 210/580-430 with the Sepro Success 22 robot / hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 153 g Spray pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Handlebar spacing: 580x580 mm Size of the clamping plates: 860x860 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Air Valve x 9 Hydraulic, needle-core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air Core Pull x 5 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection un ...
Key data: 800 kN
Sumitomo Demag Systec 80/420-310 with the Wittmann W818 robot Year of Make: 2015 Injection unit: Screw diameter: 30 mm Injection weight: 103 g Spray pressure: 2755 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Parallel movements Built-in printer Robot Wittmann W818 Year of Make: 2013 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4000 kg Length/Width/Height: 4.10x ...
Key data: 3500 kN
Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4- ...
Parallel Gear Brake Motor Geared motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12/4 Gear motor: Type: AUK60TL OEL: 5,0l Design: B14.2-65-0/178 More information can be found on the manufacturer's website, see pictures. Condition : New, may show traces of storage, comes from stock. Scope of delivery : see the pictures.
Clamping force: 2700kN, injection volume: 500cm³, injection pressure: 3500bar, EUROMAP size: 2700-1750, rated power: 22kW, weight: approx. 10.7t, nozzle contact force: 58kN, total current: 138A, upstream fuse: 160A, max. short-circuit current: 10kA, enclosure type (UL): 1, hydraulic motor operating hours: 730h, hydraulic pump (clamping force): 65h, operating system active: 3,360h, was regularly maintained, is in well-maintained condition, an on-site inspection is possible.
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 889; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE50GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 103
Riggs 1000 Series Depositer A fantastic opportunity to purchase a high-quality Riggs 1000 Series Depositer in excellent working order. Ideal for food and beverage manufacturers looking for a robust, accurate and dependable depositing/filling machine. Specification Riggs 1000 Series Depositer Manufactured in 2010 40-litre stainless steel hopper included Heat-resistant reinforced product feed hose included Fill range: 25ml to 400ml Excellent operating condition Very well maintained Ready to go straight into production
Manufacturer: Tornos Model: Deco Sigma 8 Year: 2007 Condition: Used Stock number: 9554 Control system: FANUC Series 32i-MODEL A Operating hours: 15200 h Maximum spindle speed: 15000 1/min Max. rod diameter: 10 mm Length: 1670 mm Width: 870 mm Height: 1650 mm Weight: 1600 kg
Op maat gemaakte, zware kraan, ideaal voor lage gebouwen, maar ook om de maximale hijshoogte binnen het gebouw maximaal te benutten.nbsp;Dit komt doordat de twee takels tussen de twee hoofdbalken zijn geplaatst (in plaats van erbovenop te rijden). Kind of: overhead travelling crane Capacity: 16 + 16 ton Span: 22 000 mm Drop: 8 meter Tackle speed: 0,6 > 4 m/min Weight: 26 ton Radiocontrol: radio control
Key data: 1000 mm, 800 mm, 500 mm
Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg
Key data: 500 mm, 420 mm, 380 mm
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions
DELTA LC 400 - Rotary Table Grinding Machine -Magnetic clamping plate (rotary table) 300mm -Max. grinding diameter 400mm -Grinding height (distance table - grinding wheel) approx. 230mm -Spindle speed 2850 rpm -Fine adjustment 0.01 mm -Distance column - grinding wheel axle approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant device -Documentation Dimensions: LxWxH 1.2x0.8x1.8 meters / weight approx. 700Kg
Key data: 850 mm, 520 mm, 475 mm
CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions
x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm control: 810 D 3D ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 8.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 DIN 69871 work table:: table surface area: 1.200 x 560 mm max. table load: 1.000 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change time: 1,6 sec change-time chip to chip: 7,0 sec feeds:: rapid traverse: 25 m/min total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Chip conveyor: Automatic Tool Changer: Coolantsystem: Spray gun: elektr. hand wheel: Signal-Light: CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours ...
Stock No.: 4012 CNC LATHE SWISS TYPE Manufacturer: TORNOS Swiss Type, Type: Delta 38/5 Serial No.: 38510126, Year of manufacture: 2013 Specifications: Size capacity 38 mm Ø Max. threading force of the main spindle M12 Max. speed drilling capacity 13 Main Spindle Speeds: 200-6000 Main Spindle Effect 7.5/11 Sub-spindle Sub Spindle Speeds: 200-7000 Spindle bore 38 Driven tool handling 200-5000 - 1 kW Sub-spindle max dia. 38 Subspindle effect 3.7/5.5 C Axis Headspindle 0.001 C acshen sub-spindle 15 X-1 axis X2 Ashes Z1 Ash Z2-Acshe Y- 1 Axis Control Fanuc 0i-TD A ...
General SKULY011 CEcheck MakeAlfa Laval Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Liquid outletcheck Solids outletcheck Motor15kW, 400/690V, 2945 rpm and 7,5kW, 400/690V, 2920rpm With variable speed drivewith frequency controller Max. rotor speed4400 rpm MaterialStainless steel General TypeFoodec 219 No.5132324-2022 Year of construction2022 Mounted on framecheck With switchgear(as is) Extra SpecificationsThis Maxine has logged a maximum of 1000 hours runningtime. Material of product-contact parts: Stainless steel (sanitary grade) Max. solid-phase density: 3.0 kg/dm³ Min/max. product temperature: 0 °C/90 °C Model: Horizontal sanitary decanter centrifuge Estimated G-force: approx. 3000 G Drum diameter: approx. 280 mm Drum length: approx. 1260 mmStarchBiotechnologyAgrochemicalsPlastic & polyme ...
Technical data for the pallet racking system: Shelving system: Jungheinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 13,980 mm Number of fields / row of shelves: 05 pcs á 2,700 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 55 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( welded truss ) Height: 4,600 mm Depth: 1,050 mm 20x Pallet rack crossbar, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN 120x30 Agraffe: 3 HK (hook) Clear width: 2,700 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 24x bolt anchors, new M ...
Technical data for the pallet racking system: Shelving system: Jungheinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 2,860 mm Number of fields / row of shelves: 01 pcs. á 2,700 mm Number of levels plus ground level: 03 pcs. The scope of delivery includes: 02x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 55 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( welded truss ) Height: 3,800 mm Depth: 1,050 mm 06x Pallet rack crossbar, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN 120x30 Agraffe: 3 HK (hook) Clear width: 2,700 mm 12x Locking Pin, Used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 08x Bolt Anchors, new ...
Technical data of the pallet rack stand: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: M Profile size: P 90 x 75 x 1.80 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,000 mm Depth: 1,100 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light
with 2-axis digital display, Fabr. HEIDENHAIN, with angle milling head, 2 dividing heads, additional clamping table, counter holder, 3-jaw chuck, various interchangeable wheels, machine light and steel transport trolley
with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device, machine light, angle milling head and counter holder
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 63 to nominal work capacity: 630 kNm PRESS TABLE table surface (left-right): 900 mm table surface (front-back): 560 mm thickness of bolster plate: 250 mm SLIDE table surface (left-right): 450 mm table surface (front-back): 310 mm spigot hole diameter: 50 mm stroke: 100 mm stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 17.5 mm stroke max.: 100 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 340 mm distance table - slide max.: 440 mm ELECTRICAL SPECIFICATIONS total power consumption: 5.5 kW mains voltage: 380 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1310 mm space requirements -front/back-: 1500 mm total height: 2900 mm ...
x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...
Key data: 61 V, 76 , 400
For sale is a new Deutz EQ-D7661 diesel generator set with 76 kVA / 61 kW power (PRP), powered by a Deutz BF4M2012C engine. Highlights: Made in the EU · 30 Months Warranty · Stamford Generator · ComAp Control. PERFORMANCE DATA • Type: EQ-D7661 • Continuous power (PRP): 76 kVA / 61 kW • Emergency power (ESP): 81 kVA / 65 kW • Output: 400/230V, 50 Hz, 3-phase • Rated speed: 1500 rpm ENGINE • Manufacturer / Type: Deutz BF4M2012C • Displacement (l): 4.04 • Charging: Turbocharger with intercooler • Injection: in-line engine • Speed Control: Mechanical • Cylinders: 4 DIMENSIONS & WEIGHT • L × W × H: 2950 × 1056 × 1900 mm (soundproofed hood) • Weight: 1500 kg • Fuel tank: 268 l • Sound level: 65 dB INCLUDED 4-stroke industrial diesel engine, 1500 rpm, water-cooled, Stamford generator, ABB circuit breaker, Manual protection sy ...
Key data: 32 V, 40 , 400
Deutz EQ-D4032: new diesel generator set in the 40 kVA / 32 kW class with Deutz BF4M2011 engine – suitable for continuous and emergency power operation. Highlights: Made in the EU · 30 months warranty. PERFORMANCE DATA • Type: EQ-D4032 • Continuous power (PRP): 40 kVA / 32 kW • Emergency power (ESP): 44 kVA / 35 kW • Output: 400/230V, 50 Hz, 3-phase • Rated speed: 1500 rpm ENGINE • Manufacturer / Type: Deutz BF4M2011 • Displacement (l): 3.11 • Charging: Turbocharged & Intercooler • Injection: In-line Injection Pump • Speed Control: Mechanical • Cylinders: 4 DIMENSIONS & WEIGHT • L × W × H: 2220 × 960 × 1258 mm (soundproofed hood) • Weight: 960 kg • Fuel tank: 98 l • Sound level: 70 dB INCLUDED 4-stroke, 1500 rpm, high-performance water-cooled diesel engine, Stamford Alternator, ABB circuit breaker, Manual protection sy ...
Key data: 24 V, 30 , 400
We offer a new Deutz EQ-D3024 generator set, power: 30 kVA / 24 kW (PRP), engine: Deutz F4M2011. Highlights: Made in the EU · 30 months warranty. PERFORMANCE DATA • Type: EQ-D3024 • Continuous power (PRP): 30 kVA / 24 kW • Emergency power (ESP): 33 kVA / 26 kW • Output: 400/230V, 50 Hz, 3-phase • Rated speed: 1500 rpm ENGINE • Manufacturer / Type: Deutz F4M2011 • Displacement (l): 3.11 • Charging: Turbocharged & Intercooler • Injection: In-line Injection Pump • Speed Control: Mechanical • Cylinders: 4 DIMENSIONS & WEIGHT • L × W × H: 2220 × 960 × 1258 mm (soundproofed hood) • Weight: 905 kg • Fuel tank: 98 l • Sound level: 70 dB INCLUDED 4-stroke, 1500 rpm, high-performance water-cooled diesel engine, Stamford Alternator, ABB circuit breaker, Manual protection system, Flexible oil lines and oil drain valve, Preheater, Lu ...
Key data: 2000 KW, 1000 1/min
MWM Deutz TBDG 441 BV16, dual fuel, Gas, Diesel, Year 1993, also spare parts for sale, turbocharger, injection pump, cylinder heads, crankshaft, ec. ec. Price per piece
sliding headstock CNC lathe, year 2006, CNC 31i - model B5. Used machine. More info & price on IndustrialBuyer.
Technical data of the pallet rack stand: Shelving system: Dexion Type: P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: hot-dip galvanised Frame profile: 100|25 Profile dimensions: 100x90x2.50 mm Adjustment grid: 50|50 mm incl. transverse and diagonal struts, Foot plates, stand protectors The stands are pre-assembled ( bolted truss ) Height: 6,010 mm Depth: 1,450 mm Note: Hot-dip galvanised surface – ideal for outdoor use Thanks to the high-quality hot-dip galvanized surface, the pallet rack racks Optimally protected against corrosion and therefore excellent for use suitable for outdoor use. The zinc coating ensures high weather resistance and a long service life – even in demanding weather conditions. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information ...
suction capacity: 150 l / sec voltage: 400 V total power requirement: 5,5 kW weight of the machine ca.: 150 kg dimensions of the machine ca.: 1,50,81,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 used injection molding machines are for sale. Enclosed are the desired photos of our used 280t and 650t Demag machines, Robot, conveyor belt and enclosure. The machines are still involved in series production and can be viewed during operation. The costs and organization for dismantling, transport from the hall to the truck, loading and transport to your location are borne by the buyer. The used 650t machine, robot, conveyor belt and enclosure The used 280t machine, robot, conveyor belt and enclosure
sliding headstock CNC lathe, year 2012, 16311 operating hours, CNC 31i-MODEL B5. Used machine. More info & price on IndustrialBuyer.
x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...
x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 950 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Infinitely variable feeds and rapid traverse in all 3 axes Fixed angle table Coolant equipment Tailstock with counter bearing Several toolholders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; it can be tested by prior arrangement.
Key data: 1040 mm, 600 mm, 500 mm
CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions
Key data: 800 mm, 700 mm, 600 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 700 Z 600 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface Automatic Swivel Milling Head ( HORIZONTAL + VERTICAL ) Universal tool changer with 30 magazine positions as double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel IKZ – 40 bar Chip conveyor Rotoclear Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Swarf Spray Gun Operating Instructions
x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis
x-travel:780 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:10 t Number of axles:5 St. spindle turning speed range:20-12.000 U/min numbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mm Round Table B-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.
x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t
x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.
x-travel:630 mm y-travel:560 mm z-travel:560 mm total power requirement:10 /15 kW weight of the machine ca.:6500 kg dimensions of the machine ca.: 4,4 x 5,4 x 2,9 m Table dimensions:1000 x 610 mm Loading:400 kg rapid traverse::X 26, Y 26, Z 20 m/min speeds::20 - 12.000 min -1 tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St. control:CNC MillPlus/TNC430 Documents:vorhanden
x-travel:560 mm y-travel:500 mm z-travel:450 mm total power requirement:16,5 kVA weight of the machine ca.:2700 kg dimensions of the machine ca.:2,30 x 3,0 x 1,90 m control:Grundig quill stroke:80 mm tool taper:SK 40 spindle speeds::40..4000 1/min feed:2 .3600 mm/min rapid traverse:4000 mm/min Documents:vorhanden
spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
CONTROLS CNC controls GRUNDIG DIALOG 12 WORKING RANGE -CUBIC- X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm SPINDLE / HEAD spindle revolutions (max): 5000 /min tool fixture: ISO SK 40 DIMENSIONS / WEIGHTS total weight approx.: 4500 kg The machine needs a new control card (price €2,000).
Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.
New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2023, Model year: 2024, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, o ...
maximum number of results exceeded
please refine your search
2.000 € 
