129,477 used machines on RESALE, but how to find them? Machine Search
- With lens membrane - With closed press basket - Machine overhauled Technical data : Press basket capacity: 6hl Whole bunch capacity: 420 kg Quantity of crushed grapes: 1200-1800 kg Fermented grape capacity: 1800-2400 kg Total installed power: 1.47 kW Dimensions: Length: 1870 mm Width: 1140 mm Height: 1470 mm
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 120 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 IKZ 40 bar with paper belt filter Chip conveyor 3 D Probe BLUM tool measurement in the work area Signal light 4 colour DMG Automation PH 150/8 16 pallets with Allmatic + Lang vises Coolant Setup BEMA Coolant Nozzle 4 Height Adjustable Machine Shoes Operating Instructions
BAZ lid Maho DMF 250 linear BJ 2002 BAZ Cover Maho DMC 63 H BJ 2002
Bobinindus genset with Deutz engine, very low hours, Power (KVA): 500, Working hours: 51
Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operati ...
Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Un ...
The scope of delivery includes: 01x Footplate, Second Choice Material color: galvanized suitable for the manufacturer: Dexion Type: Speedlock S4 Frame profile: S | M | H Material thickness: approx. 3.00 mm Total width: approx. 88 mm Total depth: approx. 140 mm Drill hole spacing (upstand): approx. 38 mm Number of drill holes (plate): 03 pcs. Drill hole Ø (plate): approx. 13 mm Weight | Pcs.: approx. 0.22 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Presse à injecter DEMAG ERGOTECH 110 T Type : 110/470-430 Année: 2003 Force de fermeture : 110 T / 1100 KN Diamètre vis : 40 mm Volume injectable : 231 cm3 Pression d’injection : 2200 bars Entre colonnes : 470 x 470 mm Dimensions des plateaux : 620 x 670 mm Épaisseur moule min: 200 mm Course d'ouverture: 600 mm Poids : 5600 kg Dimensions : 4,70 x 2,00 x 1,50 m
This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine.
This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a HYBRIDE 10+5 drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine.
Good working Deutz F2L912 17 kW-1800 Rpm runs well, excellently suited as an exchange engine if an overhaul of your current one is no longer possible. Call or email for more information., , Weight: 250 kg, , = More information =, , Year of manufacture: 2008, Colour: Blue, Part suitable for: machines, Technical condition: good, Visual appearance: good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to vis ...
This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine.
x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information.
Dimensions (L/W/H): 8800x2900x2100 mm Weight: 6500 kg Total power requirement: 18-36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Deckel Maho Model: DMU 50 eVo Linear Year of Manufacture: 2007 Machine Type : Milling Machine Installed power: 44 kVA Supply voltage: 400V / 50Hz Machine hours (power on): 24,610 h Spindle hours: 9,820 h Find more here - / Contact us at -
Track width crane: 9.50m width (without stop buffer); 3.77m Cat track width: 1.40m Lifting capacity: 10to according to the hook dismantled
Travel X/Y/Z: 600mm/400mm/500mm, Speed: 8000rpm, Tool holder: SK40, Feed rate: 10m/min, Rapid traverse: 20m/min, Table dimensions X/Y: 1000mm/600mm, max. table load: 500kg. Machine dimensions X/Y/Z: approx. 3560mm/2700mm/2250mm, Weight: approx. 6500kg, Operating hours: approx. 66000h, Spindle hours: approx. 18000h. Including approx. 30 SK40 holders and 2x Allmatic hydraulic vices. Documentation available. An inspection on site is possible. Without IKZ and tool changer.
surface area: 420 800 mm no. of flutes: 9 groove width: 12 / Abstand 45 mm weight of the machine ca.: 110 kg dimensions of the machine ca.: 10,50,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Jrion & Denz longitudinal saw Edging saw longitudinal circular saw Type HMS 15 Cutting length 3400 mm Cutting width 650 mm Cutting height maximum 120 mm Width stop can be adjusted motorically at the touch of a button Saw motor 11 kW Hydraulic pump feed 1.5 kW Saw blade feed speed infinitely variable 1 – 60 m/min. Saw blade return 60 m/min. At full capacity of the maximum cutting height of 120 mm, the maximum cutting length is 3200 mm. Saw blade diameter maximum 450 mm Cutting height for saw blade diameter 400 mm, 105 mm Saw blade bore 30 mm Extraction connection diameter 200 mm was mainly used to cut 80 mm thick planks Saw is activated via footswitch Rated current 23 A, frequency 50 Hz Instruction manual included Saw blades included 2 pieces diameter 400 mm, 4 pieces 450 mm Good, ready-to-use condition Machine Dimensions: 5750 mm x 1700 mm x H 1200 mm
CNC verical machining center Type: DMC 835 V Manufacturer: Deckel Maho Year: 2006 Control: Heidenhain iTNC 530 Total hours: 20,579 Spindle hours: 6,598 X: 835 mm Y: 510 mm Z: 510 mm Tool magazine: 20 positions Spindle cone: SK 40 Chip conveyor Accessories: weldon holders collet clamps, about 40 pcs vihorlat 160 vices 2 pcs other vices, clamps, washers Machine in good condition, under power Find more here - / Contact us at -
Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details.
Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details.
1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,
This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8000 rpm. The machine has a robust weight of 3800 kg and includes a cooling/filtration system from Transor Filter GmbH. If you are looking to get high-quality internal grinding capabilities, consider the Michael Deckel S22 internal grinding machine we have for sale. Contact us for further details.
Various conveyor belts, different lengths and widths, conveying screws, vibration troughs, washing systems,, NIKO trough for flushing, ABL washing system with conveyer belt,, PEACE submachine for apples,, SOLIA G450 large kitchen slicer,, SOEHNLE belt conveyer scale., Destacking for GN shells,, GMS ILPRA - sieve seal for gastro basins,, GÜNTHER Tauchbad,, BAKON glaze application,, Special filling - system for mushrooms,, LOMA metal detector,, NILFISK High-pressure station,, Rotary drum screen for wastewater treatment, WINKLER CORSAR drum dryer,, MAJA ice cream machine,, DIERKS spiral nut, DIOSNA planetary mixer,, NWU Water Cooler,, KAESER compressor,
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC shearing machine manufactured in 2014. This DERATECH Practica CNC features a maximum cutting length of 2500 mm and can handle a maximum sheet thickness of 6 mm. Weighing 6100 kg, this machine is designed for durability and efficiency. If you are looking to get high-quality shearing capabilities, consider the DERATECH Practica CNC machine we have for sale. Contact us for further details.
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4,4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 500 kg throat: 5.000 mm base plate: 0,7 x 0,7 m dimensions of the machine ca.: 5,14 x 0,70 x 4,75 m Crane DEMAG - DC-COM 1/1 H5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: 1020 m³/h engine output: 7,5 kW sound - pressure - turn off level ca. max.: 75 dB suction power: 1013 bar motor speed: 2950 min-1 range L-W-H: 1,25 x 1,35 x 1,5 m weight: 577 kg Electric 400 Volt: UNUSED Delta Blower Generation 5 rotary lobe blower, type GM 15 L, design B3, size 132 S. Efficiency class IE3. Siemens motor with 3 built-in temperature sensors, soundproof enclosure. Suction pressure 1,013 bar. Volume flow in positive pressure operation 1,020 m³/h Volume flow in negative pressure operation 1,080 m³/h The device was unpacked and run for a maximum of one hour before it was discovered that it was too small. A new, larger one was then ordered. Sound enclosure made of galvanized sheet steel with oil drip tray. Painted in RAL 5001 color / front elements in RAL 7047. Segmented design with interior lining and forced ventilation. Fan impeller driven by blower shaf ...
Load capacity 1000 kg Total height – 455 cm (505 cm) Free space under the boom – 360 cm Hook path - 300 cm Column – 455 or 505 cm (to choose from) Flange – 70 x 70 x 3.5 cm Chain hoist GIS 800 kg, year 2020 - with warranty Total weight – 850 kg Colour – RAL 7044 Year of construction – 1987 – after overhaul – Documentation
x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Biete Getrieberegglerkarte Deutz mit der Teilnr. 1240 4590EE for sale.
Key data: 3
Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg
Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -
Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm
x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...
Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional
Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
maximum number of results exceeded
please refine your search
