de walt used for sale

The Doka Alu-Framax pallet is the smart storage and transport solution for your Alu-Framax formwork elements . ✔ robust & galvanised †built for maximum durability ✔ stackable & space-saving †perfect for warehouse & jobsite ✔ delivered folded †easy handling & compact storage ✔ available in 3-star and 1-star quality 👉 Minimum order: 3 pcs = 1 packaging unit 🚛 On request, we deliver your pallets directly †or you simply pick them up yourself and get started right away.   Get your pallets now †before stock runs out! 🚀 Perfect for everyone who values quality, efficiency and order on site. Price: from € 215,00 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to us ...

Powerful. Proven. Ready to work. 💪 This Doka Superdek complete package is designed for 10,000 sqft of slab formwork with a 10 slab thickness , making it the ideal solution for projects with high loads, large spans, and tight construction cycles across the US market 🇺🇸 Superdek stands out with its large grid spacing , reduced number of props , and the drop head system that enables fast and efficient stripping. Installation is carried out mainly from below , increasing productivity while significantly improving jobsite safety. 🚀 Key benefits Designed for 10,000 sqft with a 10 slab Large system grid → fewer props, more freedom on the jobsite Drop head system for fast cycle times and early striking High load capacity for commercial and residential construction Doka Superdek †a proven slab formwork solution o ...

Looking for used slab formwork to speed up your construction project? This Faresin Alufort formwork package offers approx. 292 m² of aluminium slab formwork , ideal for efficient concrete floor and ceiling formwork in residential and commercial construction. The Alufort system is designed for lightweight handling , high reusability, and fast installation on site. Perfect if you want to buy used aluminium formwork while still relying on proven quality. 🏗️ 💡 Key benefits: ✔ Robust aluminium slab formwork system †strong and lightweight ✔ Large 292 m² formwork package for slab and ceiling areas ✔ Used formwork with excellent value for money ✔ Including transport and storage pallets for easy logistics 📦 ⚠ Accessories are not included in this package, but available on request . Large slab formwor ...

Radius grinding device for DECKEL S11 grinding machine – ISOG ref: 2601X00

This package includes all currently available Dokadek panels in 1-star condition †the smart solution if you want to buy used slab formwork that still gets the job done. Functional, ready to go, and optimized for practical use. 💡 Dokadek 30 is a frame-based slab formwork system without beams †lightweight, quick to assemble and ideal for covering large areas. Aluminium frames provide stability, while the plastic panel surfaces are smooth and easy to clean. 💪 Looking for Dokadek used panels with reliable functionality at a great price? You’ve just found them. 🎯 ✅ What’s in it for you: ✔ Frame-based Dokadek panels in solid working condition ✔ Lightweight components †aluminium and plastic combo ✔ Ground-level assembly †fast and efficient ✔ Perfect for simple, budget-focused site app ...

Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor, gas pressure regulator, electrohydraulic drive, rotary actuator -Manufacturer: Deufra, electric actuator, rotary actuator -Type: AS 25 -Voltage: 400 V / 0.1 kW -Mounting: Bolt circle Ø 101 mm M10 / Ø 70 mm M8 -Dimensions: 460/310/H190 mm -Weight: 19.7 kg

🚧 High demand for 5.50 m props †secure availability now! The Doka Eurex 20 550 prop is one of the most requested formwork props for slab formwork and high floor heights . Especially 5.50 m props are currently in strong demand across the market, making available quantities limited. Companies planning upcoming formwork, concrete and construction projects should secure their required Doka Eurex 20 550 props early. ⚠   This package includes the classic original version of the Doka Eurex prop , meaning not the Eco and not the Top version . The first generation of the Doka Eurex 20 550 formwork prop is well known on construction sites for its robust design, reliable mechanics and exceptionally long service life . Thanks to its durable construction and proven performance, the Doka Eurex 20 550 prop remains a trusted solution for slab formwork, formwork systems ...

A Deckel CNC universal milling machine is offered. Travel X/Y/Z: 700mm/600mm/550mm, quill stroke: 80mm, milling head swivel range: +/-90°, spindle power: 12kW, max. spindle speed: 6300rpm, feed torque X/Y/Z: 13Nm/13Nm/21Nm, feed rate X/Y/Z: 6m/min, rapid traverse X/Y/Z: 6m/min, tool holder: SK40, measuring resolution: 0.001mm, 4th axis resolution: 0.001°, max. slide load: 1000kg, number of T-slots: 1, T-slot width: 14H7mm, mounting holes for table accessories: M12, control: Deckel Dialog 11. Machine weight: approx. 3900kg, electrical cabinet weight: approx. 475kg, 5110mm/4654mm/2335mm, floor space X/Y: approx. 6200mm/5700mm, floor load: 3500kg/m². Documentation available. Inspection by appointment possible.

Demag 10 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 10 ton (1AM) Span: 30 000 mm Tackle speed: 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: radio control Numbre of riggers : double girder

X-axis: 880 mm, Y-axis: 630 mm, Z-axis: 630 mm, table dimensions: 1250 × 700 mm, table load capacity: approx. 500 kg, B-axis (milling head): manually or NC swiveling up to 103°, maximum spindle speed: 12,000 rpm, power: 15 kW, torque: 130 Nm, tool holder: SK 40, tool magazine capacity: 32 positions, control system: Heidenhain TNC 430 MillPlus, length: 4073 mm, width: 3323 mm, height: 2375 mm, weight: approx. 9.5 t. An on-site inspection is possible.

Takel type: EZDH 1032 H24 Klasse 3M - 5 ton Kind of: overhead travelling crane Capacity: 10 ton (2M) Span: 30 000 mm Tackle speed: 12,5 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: radio control Numbre of riggers : double girder

x-travel: 1350 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain iTNC 530 total power requirement: 13 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demag 10 ton x 28 470 mm Kind of: overhead travelling crane Capacity: 10 ton (2M) Span: 28 470 mm Tackle speed: 0,8 & 8 m/min Rotationspeed: 6,25 & 25 m/min Displacementspeed: 63 m/min Radiocontrol: radio control Numbre of riggers : double girder

This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details.

AFM DEFUM BACA R-1000 CNC vertical machining center was built in 2013 in Poland by Andrychowska Fabryka Maszyn S.A. The machine is designed for the precision machining of workpieces with a maximum weight of 500 kg. The combination of a stable design and high-quality components guarantees the best machining results. This makes the CNC milling machine ideal for use in production plants, both for unit and series production. Workpieces are machined in three axes X, Y and Z with feeds of 1000 mm, 510 mm and 560 mm respectively. To ensure excellent dynamics and repeatability of feeds, all linear axes are driven by efficient servo drives. The spindle, operating at a maximum speed of 8000 rpm, features a BT40 taper, which enables the use of a wide range of cutting tools designed for various machining operations. The work table with a length of 1200 mm and a width of 500 mm is equipped with T- ...

Takel type EZLDH 525 H20 klasse 1AM - 10 ton Kind of: overhead travelling crane Capacity: 10 ton (1AM) Span: 28 465 mm Tackle speed: 0,6 & 6,3 m/min Rotationspeed: 6,3 & 25 m/min Displacementspeed: 10 & 40 m/min Weight: 15 ton Radiocontrol: radio control Numbre of riggers : double girder

This 3-axis ETALON Derby 454 was manufactured in 2001. It features a travel of 457 mm in the X-axis, 508 mm in the Y-axis, and 483 mm in the Z-axis. The machine includes a table size of 750 x 550 mm, providing ample workspace for precision measurements. If you are looking to get high-quality measurement capabilities, consider the ETALON Derby 454 CMM machine we have for sale. Contact us for further details.

This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details.

Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PKF 12/4 -Power: 0.05/0.17 kW -Speed: 450/1440 rpm -Shaft: Ø 14 mm -Protection rating: IP54 -Number: 2 geared motors available -Price: per piece -Dimensions: 270/210/H220 mm -Weight: 12.8 kg

Crane control unit, controller, safety control unit, safety switch, safety sensor, control unit, overload release power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46953144 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.4 kg

Crane control system, controller, safety control system, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, gear limit switch, contact evaluator, frequency evaluator -Manufacturer: DEMAG, crane control contact evaluator, original packaging -Type: Dematik MKA-2 -Item No.: 46967044 -Cardboard dimensions: 175/115/H60 mm -Weight: 0.3 kg

Crane control, controller, safety control, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, auxiliary switch block, auxiliary switch, contactor, solid-state contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: DEMAG, Schütz reversing Schütz, unused, original packaging -Type: DSW 3TF 8133 -Item No.: 87535044 -Cardboard dimensions: 165/105/H75 mm -Weight: 0.5 kg

Degen FSM 300 Surface Grinding Machine High-quality precision surface grinding machine from the German quality manufacturer Willy Degen, model FSM 300. The machine is characterized by its compact design and extreme precision in tool and mold making. It is ideal for workshops with limited space that do not want to compromise on accuracy. Extensive accessories & highlights including: Digital position display (DRO): For precise work and error-free delivery. Original Suction & Wet Grinding Unit: Ready to connect directly for clean work and optimal workpiece cooling. Magnetic Clamping Plate: Already assembled for immediate starting. Technical data (according to nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Year of Make: 2000 Connection: 400 V / 50 Hz (high current) Power: 2.7 kVA / 5.6 A Control voltage: 24 V sec. "Everything f ...

- Basket capacity: 1200l - Elastic membrane new, 2026 - Machine with integrated compressor - With central filling, ball valve NW 80 - Feet: H: 300 mm - Probes in the juice vat for cider pump control - With tester emptying trolley - Machine in very good condition, little used

Crane remote control, crane control, crane control, pendant switch, control switch, control unit, empty housing for pendant switch, lower housing part for crane remote control -Manufacturer: Demag, lower housing part for crane remote control, original packaging -Type: DST6/7 -Item No.: 87402533 -Quantity: 2x lower housing parts included -Price: per piece -Cardboard dimensions: 445/85/H85 mm -Weight: 0.6 kg/pc.

- Elastic membrane in good condition - Diaphragm in very good condition - Machine with integrated compressor - With central filling, ball valve NW 80 - With Pressostat and alarm siren - Feet: H: 500 mm - Probes in the juice vat for cider pump control - Machine in good condition

RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year.; Gross weight [kg]: 11481; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000

RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year., Images shown might not reflect actual configuration.; Gross weight [kg]: 7436; Engine: Caterpillar C32; Accessories: Tanker, Control Panel, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000

Injection moulding machine Demag 1000 to BJ 2019

surface area: 420 800 mm no. of flutes: 9 groove width: 12 / Abstand 45 mm weight of the machine ca.: 110 kg dimensions of the machine ca.: 10,50,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,,2 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: - mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,20,81,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 7,5 kW weight of the machine ca.: 5,5 t Working range: Longitudinal stroke X axis 600 mm Vertical stroke Y axis 500 mm Cross stroke Z axis 500 mm Clamping size of angle table 530 x 900 mm Max. weight of workpiece on table 450 kg Distance from table to vertical spindle, min./max. 120 / 620 mm Distance from table to horizontal spindle, min./max. 156 / 656 mm Tool taper SK 40 Spindle speeds 0 - 6,300 rpm Feeds X, Y and Z Axes, max. 2 - 10,000 mm/min Quick feed X, Y and Z Axes 10,000 mm/min Spindle drive 8 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 5,500 kg Accessories / Special Features DIALOG 11 CNC Control in 4 axes with all the usual options, cycles, and subprograms. Graphic display and electronic hand wheel. Vertical milling head can be pushed up manually so that the  ...

x-travel: 5500 mm y-travel: 2750 mm z-travel: 1500 mm total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 8x4,5x4,2 m Measuring column, longitudinal movement, X Axis 5,500 mm Measuring slide, cross, as Y Axis (measuring head) 2,750 mm Measuring slide, vertical, as Z Axis (vertical) 1,000 mm Adjustment of measuring head, roll axis 360 ° Measuring table 5,000 x 2,500 x 350 mm Weight, approx. 20,000 kg Space required 8,000 x 4,500 x 4,200 mm Accessories / Special Features : o RENISHAW 3D probe head with rotating-tilting device, operating depending on orientation. o Universal 3D Measuring Software, CHOROS Version 5.2 with DEC Software, OPEN VMS Alpha ADL, Version 6.1 with various additional SEC Software, OVMS Base, NAS 150, Cluster, OPEN 3 D, Version 2.5, etc. for manual or automatic measuring of ruled geometry and freeform surfaces, ideally  ...

x-travel: 4070 mm y-travel: 1185 mm z-travel: 1985 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6000 x 4500 x 4000 m Consisting of: Working Range: Measuring column, longitudinal movement, X Axis 4,070 mm Measuring slide, cross, as Y Axis (measuring head) 1,185 mm Measuring slide, vertical, as Z Axis (vertical) 1,985 mm Adjustment of measuring head, roll axis 360 ° pitch axis 220 ° Measuring table 5,000 x 2,000 mm Weight, approx. 15,000 kg Space required 6,000 x 4,500 x 4,000 mm Accessories / Special Features : o 3D tracer head, with turning/swivelling device. o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and  ...

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm weight of the machine ca.: 6,5 t CNC Steuerung Heidenhain TNC 426 Kühlmitteleinrichtung Spänewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2050 mm y-travel: 520 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain TNC 430 2x 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are  ...

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm turning speeds: 12000 1 U/min : control: Heidenhain total power requirement: 59 kW weight of the machine ca.: 10,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: DEMAG : . : 20 Euro . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2,5 t weight of the machine ca.: 80 kg : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t weight max. in kg: 1000 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain TNC 355 x-travel: 1.000 mm y-travel: 400 mm z-travel: 450 mm surface area: 1.300 x 400 mm feed range: 1 - 6.000 mm/min number of spindle speeds: 60 - 3.600 U/min vertikal number of spindle speeds: 30 - 1.800 U/min horizonta spindle taper: SK50 vertical and horizontal milling possible: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10000 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2003 Type: 1000/1400 - 8000 NC4 Clamping Force: 1000 T Screw Diameter: 110 mm Theoretical Injection Volume: 4372 cm³ Injection weight. : 3930 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Oil Capacity: 1300 L Dimensions: 11,90 x 3,20 x 2,90 m Weight: 63 tons

Vacuum well point dewatering filters, In 50mm and 60mm div length sizes., , = More information =, , Year of construction: 2022, , = More information =, , Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, yo ...

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2024, Model year: 2022, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dril ...

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2025, Model year: 2022, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dril ...

Good working Deutz F3L912 27 kW-1500 Rpm runs well, excellently suited as an exchange engine if an overhaul of your current one is no longer possible. Call or email for more information., , Weight: 350 kg, , = More information =, , Year of manufacture: 2009, Colour: Blue, Part suitable for: machines, Technical condition: good, Visual appearance: good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to vis ...