de walt used for sale

Filter hose chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose -Ventilation hose: Exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved -Length: 3500 mm -Number: 20 hoses available -Price: per piece -Weight: 1.6 kg/piece

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -Manufacturer: Debus, industrial vacuum cleaner type DDS 605 7 31 M -Operating pressure: 6 bar -Air requirement: 2.6 m³/h -Suction performance: 7.8 m³/h -Dust container: volume approx. 110 liters -Dimensions of container total: Ø 640 x 730 mm -Dimension aggregate: 1330/620/H1360 mm -Total weight: 153 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Demag, electric chain hoist with chassis -Type: PK1N load capacity 250 kg -Main stroke: 4 m/min -Fine stroke: 2 m/min -Transport dimensions: 600/500/H230 mm -Weight: 23 kg

Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as inspected -Housing damaged, cable without connector, see photos -Manufacturer: Demag, crane remote control control unit -Cable length: 2.0 m / 5-core -Dimensions: 500/300/H100 mm -Weight: 1.9 kg

Rotary union, rotary union, rotary distributor, rotor-borne rotary union -Condition: the rotary union is unused -Design: Brass housing and stainless steel rotor -External thread: 1 inch left -Internal thread: 1 inch -Passage: Ø 22 mm -Number: 2x rotary unions available -Price: piece -Dimensions: 83/83/H160 mm -Weight: 3 kg

Standard base for welding table, table base, table base for welding tableWelding and assembly tables -Manufacturer: Demmeler, standard foot for welding table 2 pieces -Type: 3-D -Pendulum feet: finely adjustable -Mounting countersunk screw: M24 -Price/Delivery: complete -Total dimensions: Ø 90 / 635 mm -Weight: 8.1 kg/piece

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump -Manufacturer: Vogel, oil central lubrication pump from milling machine Deckel FP4L -Type: MFE 5/S3 -Motor: Type DM 6 60 W -Dimensions: 185/130/H250mm -Total weight: 5 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 -Drive: 220 V / 370 W -Connection input: Ø 32 mm -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, glass scale from milling machine Deckel FP4L -Type: LS 803 ML 1240 mm -Quantity: 1x glass scale available -Dimensions: 1345/200/H50 mm -Weight: 1.2 kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

CPU module, electronic modules, PLC module, plug-in card circuit board, circuit board, board, digital input module, -Printed circuit board: Electronic module from screw compressor Demag type 350WS -Type designations: CPU-MK1 V1.1 MK1-ADU V1.1 MK1 Digital-Input V1.1 MK1 REMIX V1 0205 00111 -Dimensions: 270/170/H130 mm -Weight: 2.6 kg

Gear motor, electric motor, electric gear motor, worm gear motor -Engine manufacturer: HEW type DEX100L/4K -Manufacturer gearbox: KEB type G22A EX-04-2007/14431801.001 -Speed: 350 rpm -Power: 2.2 kW -Shaft: Ø 25 x 50 mm -Protection class: IP55 EX -Dimensions: 700/250/H310 mm -Weight: 60 kg

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: ZBF80A8/2B020 -Manufacturer gearbox DEMAG Type: AMK20DD -Power: 0.13/0.50 kW -Speed: 45/131 rpm -Design: M0-30-1/16.4 -Hollow shaft diameter: toothed Ø 28/30 mm -Protection class: IP54 -Dimensions: 505/210/H220 mm -Weight: 42.3 kg

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece

Friction wheel, running wheel for bridge crane, bridge crane, overhead crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, Wheel block for crane chassis -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/pc.

Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Flat geared motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Defan, geared motor with drive shaft -Speed: 186 rpm -Transmission: Type NMRY090 i= 7.5 -Engine: Type YS100L2-4 -Power: 3 kW -Hollow shaft/shaft: Ø 35 mm / Motor shaft Ø 25 mm Dimensions see photos Protection rating: IP55 -Dimensions: 600/250/H330 mm -Weight: 38.2 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granulate dryer type GDM -Dosing system: GDM650-2 -Tank: 1010/770/H600 mm -Individual components: see photos -Quantity: 1 device available -Dimensions: 1170/800/H2780 mm -Weight: 521 kg

Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

winch, lifting winch, construction winch, anchor winch -mechanical winch -Loading force switchable: 1,250 kg / 5,000 kg -with freewheel and mechanical brake -Drum: Ø 300 mm -Side windows: Ø 600 mm -Drum length: 800 mm -Operation: via hand lever Quantity: 3 pieces available, 1 piece winch with Ø 12 mm rope Price: per piece -Dimensions: 1200/1200/H950 mm -Weight: 684 kg/piece

General SKU225Y106 MakeDeltafilter Serial5454 Year of construction2003 LocationBarneveld Floor space120 x 85 x 175 cm/ 200 kgTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicOintmentsGeneric medicinesPowdered foodsPaints & coatingsConsumer wasteOils & fatMiscellaneous filtersDeltafilterIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > Agro ...

Manufacturer: Fraxinus - Desco , Year: 2008, Superordinate control: yes, Cycle performance units/min: 5, Work piece width min-max mm: 155-1070, Min.-max. workpiece length in mm: 482-3000, Min.-max. workpiece height in mm: 18-250, Vorschub der Montage m/min: regelbar, Roboterbeschickung für Pappe: yes, Stacking locations: 3, Ausrichtlineal Montagelinie: yes, Length of wrapping belt mm: 25000, Roboteraufstapelanlage: yes, Stacking locations: 3, Carton at pallet: yes, Stacking patterns possible: yes, Discharge station: 1, Einschleussstation: yes, Packing belts: 1, Automatic carton sealer: yes, Folieneischlagstation : yes, Folienbreite max mm: 1500, Foleinschrumpfanlage: yes, Stacking robot: yes, Stacking locations: 2, Pallet buffer: yes, Automatic pallet wrapper: no, Pallet buffer: yes, Feeding speed adjustable: yes, Feed out conveyor for pallets: yes, Sice - euro-pallet: yes, Belt width m ...

Manufacturer: Delle Vedove, Type: SPL /7/200, Year: 1995, Sanding width mm: ca.10-100, Sanding hight mm: 80, Sanding belts horizontal/bottom: 1, Bandschleifaggregate Stk.: 1, Bürstenaggregate Stck.: 3 links+3 rechts, Right side units Qty.: Band, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: Bürste, Aggregat 2 kW: ca.1,2, Unit 3 slewable: Bürste, Aggregat 3 kW: ca.1,2, Unit 4 slewable: Bürste, Aggregat 4 kW: ca.1,2, Unit 5 slewable: Bürste, Aggregat 5 kW: ca.1,2, Unit 6 slewable: Bürste, Aggregat 6 kW: ca.1,2, Unit 7 slewable: Bürste, Aggregat 7 kW: ca.1,2, Transport chain mm: yes, Feeding speed min-max m/min: 5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Brushing unit: yes, machine ready for demonstration: yes, FREE TEXT: mit automatischer Schleifscheiben Zustellvorrichtung für Schleifscheibenaggregate/inkl Siko Apstapelanlage, Year :1995

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Demag 1000kg 13/3PF4, Electr. Trolley + C Rail Cable Cable Trolley Chain Hoist Total weight approx. 80 to 120 kg. Good used condition, full function. The cover caps on the hand control unit are missing. Ride back and forth at one speed each. Lifting and lowering at two speeds each. There are 3 C rails with associated connectors. Total length approx. 14m. Including flat cables and sufficient cable trolleys that run in the C rails. Except for the H-beam, the system is then complete.

Key data: 800 mm, 650 , 650

We have various spare parts in stock for the following machine. Please inquire! DMU 80E Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410

x-travel: 1200 mm y-travel: 600 mm z-travel: 500 mm Control: Dialog 11 turning speed range: 0 - 6.300 U/min spindle taper ISO: 40 total power requirement: 10 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4 x 3 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Speckschneider Treif Derby 100S-CE , Typ 2740, Würfelschneider, with a pair of gates for sausage salad 4x42mm, 4-bladed knife for cutting vegetables, instruction manual, Connection 400V, built in 1999, Dimensions LxWxH approx. 137x80x117cm, weight approx. 325kg, good used condition, fully functional

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain NC-Swivle milling head:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 10 / 15 kW max. Torque: 130 / 87 Nm tool taper: HSK-A 63 swivellable: NC: +30 / -120 ° NC-Rotary table:: table surface area: 1.000 x 600 mm table diameter: Ø 600 mm T-slots: 1x 14 x H7, 8x 14 H12 max. table load: 500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 2x12 (24) pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 8,0 kg max. tool length: 315 mm total power requirement: 45 kVA weight of the machine ca.: 6,8 t dimensions of the machine ca.: 4,5 x 4,5 x 2,5 m Documents: Chip conveyor: Coolantsystem: turning milling head: elektr. hand wheel: Spray gun: exhaust fan: Showa CRD-1500R Operation mode 4: test prob ...

x-travel: 7000 mm y-travel: 3000 mm z-travel: 1200 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 150 mm quill:: 380 x 380 mm Plate dimensions: 4x 5000 x 2000 mm powered rotary table: 1600 x 1600 table load of rotary table max.: 10 t travel on the bed: 1500 mm tool taper: SK 50 turning speeds: 2,5 - 1000 U/min power capacity - milling spindle: 30 kW dimensions: m weight of the machine ca.: 62 t used manual horizontal borer with plate field - digital scale - tailstock - moveable vertical milling head - movable turn table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual + 95 / - 10 ° Table area Ø 700 x 500 mm Inclination range of table (manually) +95 / -10 ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 210 – 610 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Fee ...

Key data: 750 mm, 600 mm, 520 mm

CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm

SCREW COMPRESSOR ✔️ Brand: Gardner Denver ✔️ Model: L110RS-13A ✔️ Year: 05/2014 ✔️ Version: V3 ✔️ Fluid: Air ✔️ Power supply: 400V – Three-phase – 50 Hz ⚙️ Key features: Flow rate: ≈ 20.8 m³/min Engine power: 110 kW Speed: ≈ 2980 rpm Weight: ≈ 2770 kg

Description used goes for all Herzog & Heymann machine with 30mm core

Description Paper rolls suitable for Palamides Delta parcel bundle delivery

Description automatic 5-fold bundle delivery Palamides delta 705 with MBO interface Year of construction 2015 Operating hours 5599 Cycle counter 231.636 Format range max. 760x305mm, min. 110x95mm Working width 760 mm Banding with 5-fold 30mm banding According to the invoice, the machine has the following equipment items: 01 M1151-04 Automatic delivery delta 705 02 01.00145 Parcel lift 700 03 01.00263 Blowing air device 705 04 01.00080 Small format device 705 05 01.00059 Stacking level 70 mm / 38 mm 06 15.10000 EN Language package german 20210916081818151

Inv. Num. : 9073 Type: FP 4 MA Producer: DECKEL Created: 1998, GO 2003 Parameters: Control system: HEIDENHAIN Work table length: 800 mm Work table width: 465 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 465 mm Y-axis travel: 370 mm Z-axis travel: 380 mm Machine height: 1734 mm Machine length: 2000 mm Machine width: 1600 mm Machine weight: 1720 kg

Casemaker DE Pack QYKM-1400x2900, Year 2023, Max.Size: 1400x2600 mm, Skip feeding area: 2180x4000 mm, Min.Size: 350x750 mm, Max.Speed: 200 pcs/min., 4 Color Flexo, Rotary Diecutting, vibration, Stacker