136,876 used machines on RESALE, but how to find them? Machine Search
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 120 x 50 mm Truss type: BX 120|50|13 Agraffe: 5 HK Clear width: 2,700 mm max. load per pair of trusses 3,150 kg, with the same. distributed load. (Note bay load) 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator
Key data: 50 KW, 420 V
Make: Deutz Engine Design made under license in China. Model: LH50GFTD Fuel: Syngas HZ: 50 Scope of supply: Engine, Alternator, Woodward Engine Control System, Control Panel Smartgen HGM9510, Synchronizer, Heat exchangers, Container, Radiator, Oil System, Batteries, Documentation. Price: € 20,000 each Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|13 Agraffe: 5 HK Clear width: 2,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Standard Features 2 roller system for thorough depilation Head scratcher also for the difficult to access head area Mobile on 4 castors Newly developed, reinforced transmission Special rubber racket (also on the back wall) Electric heating in an oil bath Integrated control and operating unit in the machine housing Swing-out rollers for cleaning the machine
Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement
CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...
Merck Hitachi 7490 Ri/Refractive Index Detector Merck Hitachi 7490 Ri Detector Flow cell 8 ul Flow rate 10ml/min Ri range 1.0 to 1.75
Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 36,910 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 03 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: sendzimir galvanised Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 6,000 mm high 1,100 mm deep 54x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 147 x 50 mm Truss type: SLB 147|18 Agraffe: 5 HK Clear width: 3,990 mm Max. load per pair of trusses 3,900 kg, with the same weight. Distributed load 108x Locking pin, used Material colour: sendzimir galvanised For securing the longitu ...
Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Power-operated tool clamps horizontally and vertically - Automatic speed manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual ...
Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 147 x 50 mm Truss type: SLB 147|18 Agraffe: 5 HK Clear width: 3,990 mm Max. load per pair of trusses 3,900 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: 28,000 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 04 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: sendzimir galvanised Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 6,000 mm high 1,100 mm deep 72x Pallet rack crossbar, used Material colour: orange I-profile: 120 x 50 mm Truss type: SLI 120 |14 S 350 Agraffe: 5 HK Clear width: 3,000 mm max. load per pair of trusses 1,800 kg, with the same. distributed load. 144x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members aga ...
DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157 ...
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mm B-axis: 0 - 161,955 ° C-axis: 360 ° spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/min spindle power: max. 35 kW max. torque on the spindle: max. 130 Nm feeds -stepless-: bis 20.000 mm/min rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min rapid traverse B-axis: 40 U/min C-axis rapid feed: 50 U/min no. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 40 bar total power requirement: 52 kVA weight of the machine ca.: 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device The data for this ad was created with ModulMWS - the ...
turning speed range - grinding spindle: 4500 U/min max diameter of the vice bore: 17,5 mm max. radius to grind: max. 10 mm max. lateral adjust. of milling cutter: 10 max. longitudinal adjust. of milling cutter: 40 max. angle for relief grinding: 45 Grad weight of the machine ca.: 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 40 - 2000 U/min feeds: 5 - 500 mm/min rapid traverse: 1,2 m/min total power requirement: 1,9 kW weight of the machine ca.: 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code: 0001 Brand: DAN - LIST - DENMARK Model: MORSO Pedal-operated guillotine saw for 45° cutting of both sides of frames Technical data: Max width of the rod to be cut cm 10 Max height of the rod cm 16 Length of the right supporting table cm 80 Pair of steel blades Height of support surface from ground cm 83 Measuring system with 3 millimetre scales Overall dimensions of assembled machine mm 1750 x 550 x 950 h Overall dimensions for transport mm 650 x 550 x 950 h Weight kg 90
Deglazing Machine Electrically heated 1000mm belt width Make: Sharp Built 2019
Depositor Make: Rademaker Model: Spot Depositor Built 2003 4 heads Ex pie production, at 170 pies min Siemens touch screen control
The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid-sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the box are first closed, only then is the box glued. Carton formats: Length 150 – 600 mm Width 115 – 490 mm Height: 110 – 510 mm Specifications: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: In addition to our VOGEL carton seamer range, we offer track rollers, leading and trailing tables, roller conveyors.
Feeding Technology / Feeding System / Vibratory Conveyor / Sorting Device / Spiral Conveyor Vibrating Cup, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System DEPRAG Type: 0622-P/0,75-1SNr: 1183884 2011 - 2012The system was used for feeding electrical plug contact pins. Product dimensions: 4 mm, length 26 mmThe pins are stored in the material hopper, the feed belt conveys the pins into the spiral conveyor as required.
Electric Chain Hoist Crane DEMAG Type PK1N-FFabr. No. 5533406 Year of construction 1983Load capacity 125 kgHook travel 3.8 metersLifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length operating bottle approx. 1.2 meters1 load string = 125 kgPower supply 380 volts, 50 HzWeight: 25 kggood condition; used
AVERY DENNISON LABEL, ALX 720 print head., Elec: 400 V / 50 Hz , Maximum format (width) mm: Less than 60 mm , Maximum cadence / minutes: about 60 products / minute , Pressure: 4-6 bars , Print speed: 2 to 30 m/min , Conveyor dimensions (mm): length: 2000 mm / Width: 82 mm
E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63314301 Year of construction: 1992Load capacity 1000 kgHook travel 4.1 metersDistance suspension to load hook 480 mmMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length of operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz.2 load trains = 1000 kg- emergency stopWeight 43 kggood condition; used
Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...
X-axis: 650mm, Y-axis: 500mm, Z-axis: 500mm, feed and rapid traverse: 60m/min, tool changer: 30-position, control: Heidenhain 430, length: 3400mm, width: 4300mm, height: 3100mm, weight: approx. 10t, spindle operating hours: 3,600h, with documentation, without clamping systems or tools, original tool changer no longer available, an on-site inspection is possible.
Controls: Heidenhain 3-axis digital readout, without clamping systems, tools and large table, with small table, machine makes noticeable operating noises, an on-site inspection is possible.
x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...
Controls: Heidenhain 2-axis digital readout, without clamping systems or tools, with large table, an on-site inspection is possible.
Rated current: 25A, control voltage: 24V, operating voltage: 380V, control: DECKEL Dialog 2, weight: approx. 1.8t, without clamping systems or tools, Z-axis scale defective, screen display partially incorrect, not operational, an on-site inspection is possible.
x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 660 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: SIEMENS 840 C total power requirement: 12 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm Control: CNC total power requirement: 13 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 800 mm z-travel: 700 mm Control: HEIDENHAIN iTNC 530 total power requirement: 50 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deltapilot level meter from Endress + Hauser. for hydrostatic level measurement in rod design made of stainless steel
x-travel: 300 mm y-travel: 450 mm z-travel: 150 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm Column drilling machine with: automatic feed Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 2 - 13 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 10 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: external data input station for use with Vollmer ND brand saw blade handling systems. Serves for individual input of the various processing steps of a saw blade. The data input station with integrated router takes over the interface between the machines, to the customers own server or PC
A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.
Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: 15,600 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 03 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 6,000 mm high 1,100 mm deep 30x Pallet rack crossbar, used Material colour: orange Truss type: SLI 120|14 S 350 I - Profile: 120 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,000 mm Max. load per pair of trusses 1,800 kg, with the same weight. Distributed load 60x Locking pin, used Material colour: sendzimir galvanised For securing the longitudin ...
Digital Travel paths X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Vise, hydraulic Refurbished in 2019
Dreher Delta 20/40 granulator for the size reduction of injection mouldings or hollow plastic bodies with a medium cross-section, rotor diameter 200 mm, working width 400 mm, 3 rotor blades and 2 stator blades, infeed opening 200 x 400 mm, cyclone and bagging opening with a diameter of 304 mm, capacity 40-180 kg/h, electrical connection 400V/50Hz, connected load of granulator 7.5 kW, connected load of extraction 0.75 kW, connected load of control unit 1.0 kW, machine floor space approx. 2500 x 950 mm (WxD), machine height approx. 1950 mm, machine net weight approx. 800 kg
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO 089 | 2 Agraffe: 5 HK Clear width: 1,445 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
maximum number of results exceeded
please refine your search
