129,507 used machines on RESALE, but how to find them? Machine Search
Gravimetry ConPro for Processing of up to 4 components Total capacity: approx. 300 kg/h GraviCon Type PP45-400/l – Basic Version Control terminal with 5'' colour screen (touch screen) Desk housing with stand Dimensions: H 430 mm x D 235 mm x W 245/340 mm 2 x hopper scale I-KTW F36 for components 1 + 2 Throughput: up to 250 kg/h (especially for fibrous materials and poorly free-flowing materials) Base frame Hopper without viewing window Load cell holder with platform load cell 2 x hopper scale I-KTW P3 for components 3 + 4 Throughput: up to 70 kg/h (for paint or aditive in powder form) Base frame Hopper without viewing window Load cell holder with platform load cell 2 x dosing unit type CP22 for components 3 + 4 with 1 set of screws and barrels each – version: 10/18 (min. 1 to max. 20 kg/h) incl. 2 x spec. Neckpiece incl. 2 x storage container type: VB1 ...
• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board
Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48700 watts very good condition with operating instructions LWH: 1600 x 600 x 1400 mm
Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min
Debarking machine Bar Gar Bg 90 min 140/ max 900mm motor 22 kw with cententic table block pull with ejection
Entrideting machine Bar Gar BG90 min 140/ max 900mm moror 22kw with cententic table block pull with ejection after renovation with warranty
Entrideting machine Bar Gar Bg9a min130mm/ max 900mm motor 30 kw Rotor on ball or raderlager, rotor with 5 or 6 Formwork knives, switchboard mi control panel
10 chisels to hydraulic dismantling hammer Sandvik Rammer size G100 and G120. 3 chisels are new 7 chisels are freshly forged.
approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 1600-105 Nominal angle: 45 degrees Nominal briete / belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW Engine Condition: good Available: now Location: Camp Frankenberg
Hydraulic Owner: Mahle Pressure capacity: 110 bar Flow rate: 32 L/min 160 l/min at 2 mWS 160L Tank
We sell 200 x Fujitsu Esprimo Q558 Mini PC's, desktops In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from al ...
weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping capacity: max. 500 bar diameter of piston: 100 mm range L-W-H: 190 x 150 x 200 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
RBP BAUER DEBLISTERING MACHINE, MODEL D3600 Built in 2003, this machine is equipped with speed control, magazine level monitoring, counter and product-specific tool for ensuring GMP-compliant recovery of pharmaceuticals that can be returned to the production cycle. Can be plugged to a central vacuum system. With manuals, maintenance file, electrical diagram, pneumatic diagram. CE compliant. Output: up to 60 blisters/min Format range: 150 mm x 120 mm Tooling changeover: 3 min (approx) DIMENSIONS Size: 550 x 1100 x 1530 mm Weight: 100 kg (approx) ENERGY CONSUMPTION Supply voltage: 110/230 V AC / 50-60 Hz Control voltage: 24 V DC
clamping capacity: max. 500 bar diameter of piston: 40 mm : M16 range L-W-H: 140 x 65 x 85 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm
Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm
Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm
Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)
Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm
Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar
Vertical tank made of stainless steel with a total volume of 100 liters (80 useful liters) Top bottom klopper screwed to the body with peephole, 3 male thread connections and one female thread connection. Bottom klopper with discharge from the bottom On structure with wheels and rails for hitch with bull or pallet truck. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 liters total (80 useful liters) Background type Klopper Envelope Structure with wheels Upper bottom tubulatures x4 Lower bottom tubulatures x1 Peepholes x1 Outer diameter body 400 mm Body height 700 mm Body height + backgrounds TOTAL: 1600 MM
Vertical tank made of stainless steel with an approximate capacity of 100 liters. Removable klopper type top bottom. With handles for extraction, with pressure gauge. In the body there are 2 electric resistors to heat the product, and 3 threaded connections (male) Conical bottom with discharge from the bottom. The discharge is blind to be able to empty the tank with the submersible pump that is inside it. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters approx Background type Conical Envelope 4 legs Outer diameter body 500 mm Body height 450 mm Body height + backgrounds (TOTAL: 1100 mm)
Key data: 300 , 1 , 1300
Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control
Volume measuring device incl. weight recording for master data entry, Bosche – used - : Price from location: 8.500.-€ (net)! Manufacturer: Bosche Wägetechnik Type: zippcube Should be size M S/No.: Z201900158 Year of construction: should be 2019 Max. 50kg 16-20 V/DC Weight scale: 110kg With HMI 12 display Combined volume and weight detection in a single pass Ideal for master data acquisition with space measurement Original price: approx. 20.000.-€ (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells and intuitive software for efficient logistics. Condition: good Available: immediately Location: Biberach
Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...
Suction conveyors with 3 kW side channel compressor various capacities available
Suction conveyors with side channel compressor and time control various capacities available
Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg
Specifications: - Total payload driven + running unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Center distance of the support rollers mot. adjustable - Roll diameter 500 mm - Roll width 470 mm - infinitely adjustable rotation speed 100 - 1500 mm/min - Torque 5132 Nm - Handheld remote control for re- and li.-run - Drive 400 V - Both units are mounted on guide rails and - can be moved manually in parallel - Space requirements Unit approx. W 2800 x H 1200 x D 1600 mm - Platzb. with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight applied. Unit approx. 4800 kg - Weight with running unit approx. 3800 kg
Both filling stations are in good condition, little in use.
Plant number 701-246; medium used radionuclide Krypton 85 Type: X1114 Specifications: Connection voltage: 40V +/- 10%, 3 phases, 50 Hz, N, PE Basis weight measurement: measuring range 30-600 μm PA; Measurement accuracy +/- 2; Sigma range (+/-0.4% but maximum +/- 0.4 μm), Measuring gap 10 mm Traverse: maximum useful width 1970 mm, traverse speed 0-10 m/min Ambient temperature: sensors 0-50°C, traverse 0-50°C, control cabinet (control) 10-35°C Humidity max. 90% without condensation
BUHLER impacts dehulling machines suitable for oats, sunflower, spelt, soya and some others.. Almost not used since it was in a store Very nice conception , 18 cm impact ring hence hight output till 3 tonnes per hour according to Handbook manufacturer with an integrated diaphram to set the material flow input With an integrated device to set the speed by hand ... but also be set with speed electronical variator Many other Buhler machines available for dehulling lines : scourer MHXF, paddy table enquiries welcome Shipping to any destination possible
with compressed air with lift to the top Stainless steel version medium sized funnels Manufacturer: Unknown
used lift-tilt device Manufacturer: L&M Type: HKV Year of construction: 2016 Net weight: 800 kg Total weight: 1,600 kg with transport castors
used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW
Construction 1976 Capacity 150 l , all Complete , ready for immediate use
M. No: 32781 Size: 300 x 560 mm Speed: 44.000 c/h
Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14
CONVEYOR STATION LORANDI / OLI / SIPA 30/15
Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.
Machine table for laser marking, stable design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm
Machine table for laser marking, lightweight design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm
Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good
maximum number of results exceeded
please refine your search
