de smet used for sale

This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 130 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 700 mm   thickness of bolster plate: 80 mm SLIDE   table surface (left-right): 750 mm   table surface (front-back): 550 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm   stroke min.: 19 mm   stroke max.: 165 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 525 mm ELECTRICAL SPECIFICATIONS   total power consumption: 11 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1685 mm   space requirements -front/back-: 1910 mm   total height: 3340 mm   total weight approx.: 11000 kg

Required air-pressure: 7 bar weight: 3 kg dimensions of the machine ca.: 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2 BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Tempera ...

Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible.

Key data: 500 mm, 400 mm, 400 mm

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 310 Year of Make: 2001 Travel: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard cabin Machine Light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions

Dosing and mixing plant Dekumed Unidos 300-3K. More information on request. Immediately available.

Key data: 333 KW, 1500 1/min

Was used as a power generator. The generator broke, the customer bought a new one! Built in 2015. Hours : 4600 Normal state No sardines ! More pictures by mail.

Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg

General SKU079B442 MakeLytzen Denmark TypeC No.891139 Year of construction1989 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Max.temp.300 °C Specified Features - Drying oven Drying oven(1x) Max. temperature300 Degr. C. Number of compartments:1 Capacity1000 Ltr Internal width820mm Internal depth840mm Internal height1500mm Electric heatingcheck Electric capacity18 KW, 380 Volt Number of doors:1 With fancheck Motor1,5 KW, 220/380 Volt With rack mounted on wheelsMobile rack (11 slots 700x790mm) MaterialStainless steel Information With switchgearcheck Floorspace1,4x1,4 M Total height2,5 M Weight700 KG Extra Specificationsweek program is not programmable. DiscountDrying ovensLytzen DenmarkDiscountDryers > Drying ovensBrand > Lytzen Denmark What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared ...

This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details.

Decoiler of construction steel coils up to 5tons. Machines worked just less than one year.

Tool milling machine Deckel FP 2 / 3-axis digital display Heidenhain ND 780 -Travel paths X/Y/Z: 450 x 200 x 400 mm -Table clamping surface 700 x 350/tilt-swivel rotary table -Speed range: 40–2000 rpm -Feeds & rapid traverses in all three axes -Tool holder: ISO 40 -Vertical/horizontal milling device with vertical sliding head -Coolant device -3-axis digital display: Heidenhain ND 780 -Documentation -Chip tray -Various tool holders -Collets Dimensions: LxW xH 1.5x1.7x1.8 meters / Weight 1600Kg

Defects: - 1 Brake defective

Key data: 1000 KW, 1500 1/min

Deutz/MWM TBG 620 V12k Maker: MWM/Deutz Type: TBG620 V12k Fuel: Natural gas Power rating: 1000 kW Year of manufacturing: 2000 Alternator: (0,4 kV, 1175 KVA 50HZ, 1500 RPM) Running hours: 40 000 Turbocharger: ABB TPS 52 Engine control system: TEM-EVO-1 SCOPE OF DELIVERY: Engine Alternator Base frame Heat exchanger Transformer (1250KVA, 20/0,4kV) Control panel Gas street History: Well maintained set, good condition. All regular service has been done by local OEM company. Engine stopped since 2022 , April.

Hours: 1,596 h Power: 138 hp (103 kW) 4-cylinder engine Continuously variable transmission (Vario/IVT) Maximum speed: 40 km/h Electrical control units (hydraulics) Weight: 4,750 kg Tyres: Front Tyre: 540/65 R28 BKT Rear Tyre: 580/70 R38 BKT

Additional title: Slewing crane, Maximum load: 2000 kg, Reach: 4 m , Lifting height: 3 m, Length: 4,00 m, Height: 4,61 m

Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...

Engine Brand: DEUTZ, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 999999 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 762 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 738 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 1065.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-a05i450710-generator- 738-kva-used/612, , = More information =, , Empty weight: 9.500 kg, Type number: A05I450710 Generator 738 KVA

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

- Technical data: Engine power: 88 kW / 118 hp Operating hours: only 1,566 Maximum speed: 40 km/h PTO speeds: 540 / 540E / 1000 Weight: 4,800 kg - Tyres: Front: 420/85 R24 Rear: 460/85 R38 - Equipment & Extras: All-wheel drive On-board computer Electronic Hoist Control (ELC) Front loader Front loader attachment frame Front axle suspension Hydraulic trailer brake Comfort cab Cab suspension Air conditioning Powershift shuttle (clutchless) Radio Rotating beacon Towbar

Overview  This solo cork capper was manufactured in 2000 by Italian company BERTOLASO. The machine was used for capping glass bottles with corks in a cider production line and is immediately available. Production at the original facility ceased in 2022. Technical data  Capacity: From 9,000 bph to 12,000 bph Formats: 75 cl glass bottles Application: Cork caps for cider bottles Scope of Delivery BERTOLASO DELTA 512 S solo capper

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm control: Heidenhain TNC 430 spindle speed:: 10000 U/min power capacity - milling spindle: 13/9 kW feed: 30 m/min rapid traverse: 30 m/min no. of workpieces in the magazine: 24 Stück tool taper: SK 40 table surface area: 800 x 500 mm table load: 0,5 t Overall size: 1,9 x 3,3 x 2,6 mm weight of the machine ca.: 4500 kg Used vertical machining centre in good condition. - external eletronic hand wheel - coolant system - servo tool magazin The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used MTA DEIT165 Refrigeration Dryer 16.50 m3/min 16 bar Year of construction 2016

Offer 25348 Technical data: - 15 pieces 300 x 200 x 100 mm - left + right versions - Total weight approx. 250 kg

x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis

x-travel:780 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:10 t Number of axles:5 St. spindle turning speed range:20-12.000 U/min numbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mm Round Table B-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

x-travel:600 mm y-travel:450 mm z-travel:400 mm Table area:700 x 480 mm spindle turning speed range:10 - 3150 U/min spindle taper ISO:40 quill stroke:80 mm dimensions of the machine ca.:1,8 x 2,1 x 1,9 m total power requirement:8 kW weight of the machine ca.:3,5 t Machine with universal turn, sviwel and tilting table - CNC control DIALOG II - splash guards - misc. parts

x-travel:1000 mm y-travel:600 mm z-travel:550 mm fixed clamping table:1200 x 600 mm spindle drive motor:9 kW spindle taper ISO:40 spindle turning speed range:10 - 5000 U/min feed range:2 - 6000 mm/min total power requirement:15 kW weight of the machine ca.:6 t

x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.

x-travel:630 mm y-travel:560 mm z-travel:560 mm total power requirement:10 /15 kW weight of the machine ca.:6500 kg dimensions of the machine ca.: 4,4 x 5,4 x 2,9 m Table dimensions:1000 x 610 mm Loading:400 kg rapid traverse::X 26, Y 26, Z 20 m/min speeds::20 - 12.000 min -1 tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St. control:CNC MillPlus/TNC430 Documents:vorhanden

x-travel:560 mm y-travel:500 mm z-travel:450 mm total power requirement:16,5 kVA weight of the machine ca.:2700 kg dimensions of the machine ca.:2,30 x 3,0 x 1,90 m control:Grundig quill stroke:80 mm tool taper:SK 40 spindle speeds::40..4000 1/min feed:2 .3600 mm/min rapid traverse:4000 mm/min Documents:vorhanden

x-travel:1250 mm y-travel:880 mm z-travel:800 mm control: Heidenhain TNC 430 tool change unit:60 Pos. Tool bore:SK 50 turning speeds:8000 1/min size of pallet:1000 x 800 mm total power requirement:56 kVA weight of the machine ca.:14,3 t dimensions of the machine ca.:5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020

x-travel:700 mm y-travel:700 mm z-travel:700 mm turning speeds:18.000 1/min max. torque on the spindle:110 / 84 Nm tool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fach size of pallet:500 x 500 mm mm max. workpiece weight:600 kg spindle:34 / 28 kW rapid traverse:60 m/min total power requirement:68 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:9,5 x 7,5 x 3,4 m dimensions for transport:4,3 x 2,4 x 2,6 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyo ...

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:12.000 1/min tool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fach size of pallet:630 x 630mm mm spindle:52 kW / 430Nm total power requirement:87 kVA weight of the machine ca.:15 t dimensions for transport:4,6 x 2,95 x 2,7 m horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours

x-travel:1.250 mm y-travel:710 mm z-travel:710 mm table surface area:1500 x 800 mm table load capacity:800 kg turning speeds:12000 1/min spindle drive:15 / 10 kW control:MILLPLUS iT HEIDENHAIN spindle taper:SK 40 tool change unit:60 Pos. capacity:44 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

x-travel:800 mm y-travel:700 mm z-travel:600 mm table load capacity:800 kg control:SIEMENS 840D shopmill turning speeds:12.000 1/min tool adaptor:HSK 63 rapid traverse:50 m/min tool change unit:30 Pos. electr. connected load with add. coolant:56 kVA weight of the machine ca.:9,5 t transport measurements machine:4 x 2,5 x 2,75 m 5 Axis simultaneously machining center, Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm, internal cooling device 40 bar, 600l prepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe), prepared for el. handwheel (without handwheel), mode 4, approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h)

x-travel:750 mm y-travel:600 mm z-travel:520 mm table surface area:D 700 x 500 mm turning speeds:30000 1/min tool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos. rapid traverse:50 m/min table load capacity - central/maximum:350 kg total power requirement:50 kVA weight of the machine ca.:9 t dimensions of the machine ca.:3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, spindle chiller, no internal coolant supply, approx. 124.200 hours "machine on", approx. 60.600 hours "spindle on" in total

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill MaterialStainless steel 2.4602 (Hastelloy C-22) Hammer Mills Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Information Floor space1,7x0,7 m Total height1,2 m Weight800 KgHammer MillsDiscountEngelsmannMills > Hammer MillsDiscountBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU283W442 MakeKrämer LocationBarneveld CEcheck TypeE5000S-Wipc-1200/CEIA Main Features MaterialStainless steel Dia/Width40 mm Specified Features - Metal detector Vibro sieve80000-6300000 tablets/hour Inlet471 mm Metal detectors MaterialStainless steel 1.4404 (316L) Metal detectorcheck Inlet471 mm Capacity80000-6300000 tablets/hour Information No.8.1165 Year of construction2013 Mounted on wheelscheck With switchcheck Floorspace2,0x1,20 m Total height2,20 m Weight370 kg ATEX compatiblecheck Extra SpecificationsDeduster: Outlet height 1334 mm. inlet height 471 mm. conveyor height 863 mm. min/max diameter tablet 3-35 mm. min/max capsule size 14,3-26 mm. dedusting path 15.5 m. Allen Bradley touchscreen control. diverter and inspection window, Helix with integral highly efficient washing nozzles, Ceia metal detector, type THS/PH21N dimensions 100x40 Generic ...

General SKU256W336 MakeDeller LocationBarneveld CEcheck Type40m2 Pressure Vacuum possiblecheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface40 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Verticalcheck Heating surface40 m2 Tube capacity550 l. Tube diameter25 mm Tube length2535 mm Max. temperature0°C/+200°C Shell capacity265 l. Shell diameter600 mm Shell length2750 mm Max. temperature0°C/+200°C Shell connectionsDN250 Information No.39588/2 Year of construction2017 Floorspace0,80x0,80 m Total height3,10 m Weight1150 kg Extra Specifications- multi-pass systemPowdered foodsGeneric medicinesShell and tube heat exchangersOintmentsTea, herbs & coffeeFine chemicalsStarc ...

General SKU283W443 MakeKrämer TypeKD7075CEIA No.KD7075-0004 Year of construction2015 LocationBarneveld Main Features MaterialStainless steel Dia/Width40 mm Specified Features - Metal detector MaterialStainless steel 1.4404 (316L) Metal detectorcheck Electric capacity100-240 volt Tunnel sizes100x40 mm Inletcheck Capacity816000-6300000 tablets/hour Information Mounted on wheelscheck With switchcheck Floorspace1,70x0,70 m Total height2,0 m Weight370 kg CEcheck ATEX compatiblecheck Extra SpecificationsDeduster: Outlet height 1334 mm. inlet height 471 mm. conveyor height 863 mm. min/max diameter tablet 3-35 mm. min/max capsule size 14,3-26 mm. dedusting path 15 m. touchscreen control. diverterand inspection window. Helix with integral highly efficient washing nozzles, Ceia metal detector, type THS/PH21N-X3D-0002, dimensions 100x40 Generic medicinesOintmentsFine chem ...

General SKU319N469 LocationBarneveld MakeDVA Deutsche Vakuum Apparate TypeRWN 1200-Z Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Motor2.5 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface1,0 m² Capacity500 l (750 l brutt) Vessel sizesø 1300 x 700 mm Plate sizesø 1300 mm Solids outletScrew ø100mm Liquid outlet50 mm With jacketcheck (15 l) Max. temperature120 °C With stirrercheck Motor2,5 kW (380 V, 1415 rpm (Ex)) Stirrer speed± 30 rpm Stirrer can be liftedcheck hydraulic MaterialStainless steel 1.4581 (348) Information Mach.No.132 527 10 Year of construction1983/94 Mounted on framecheck Floorspace2,5 x 2,5 m Total height3,5 m Weight2500 kg ATEX compatiblecheckPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCat ...

Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2022, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whiche ...

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2023, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whiche ...

New Deutz engine Type TD2011L04W, 68 Kw -- 2600 RPM, Applicable in many machines., If you have a defective engine, please do not hesitate to contact us., Reconditioning is a more expensive option like this., , Weight: 450 kg, , = More information =, , Year of manufacture: 2023, Model year: 2024, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, o ...

Decoiler, Reversible Decoiler GSW SCHWABE Type LHD 50/800 SondDouble Decoiler, Double DecoilerFabr. No. 5775 Year of construction approx. 1995Coil weight 50 kg per sideCoil width max. 130 mmCoil inner diameter 155 - 445 mmCoil outer diameter 850 mmFeed washers 850 mmThrust rings 850Middle reel shaft to reel foot 980 mm- Reel structure manually rotatable by 180 with locking steps- central spread via rotary lever adjustment- mechanical disc brake, adjustable brake shoes via knurled screwSpace requirement

Langguth V 81 Bucket Destapler,Destapler for unpalpping buckets Bucket size from 2.5 - 20 l automatic handle alignment Very good condition, directly from production!

Auction-ID: A1-46031-5