de smet used for sale

Electric Autoclave Manuf.: Desfor Internal dims: 1.5m diam. x 7m long Max. working pressure 8 bar Temperature rating max. 175deg C 220/380 volts Year 2007

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm table surface area: 790 x 560 mm spindle taper: SK 40 spindle turning speed - stepless: 20 - 12.000 U/min spindle drive: 13 kW max. torque on the spindle: 83 Nm feeds x/y/z -stepless: bis 20.000 mm/min rapid traverse: 30 m/min ATC: 20 Pos. tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 12 bar control: HEIDENHAIN, TNC 620 total power requirement: 17 kVA weight of the machine ca.: 3,9 t dimensions of machine L x W x H: 3,0 x 1,92 x 2,35 m Accessories: probe HEIDENHAIN, TS 460, electron. hand panel, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Bread slicer bread gate - Manufacturer: Treif Maschinenbau GmbH - Model: Delfin - Year of construction: 2005 - Operating voltage: 230 volts - Rated current of the machine: 2.5 - Nominal power: 0.9 kW - Weight: 175 kg

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motors from various manufacturers are available. 1) Bauer DK94V13V/231. 2) Siemens 1LA2778-4AA21. 3) Magnetic VPD6010-002. 4) SEW RF77/A. 5) GK 830-200LW. 6) Bauer DO740-200L. 7) RKF 27/28/2057R. 8) Lenze DERAXX071-32. An on-site inspection is possible.

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: White , Engine Condition: Used , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 75 Kw, Rated Speed: 1800 Rpm, Generator KVA: 75 , Generator Hz: 60 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/john-deere-4045tf120-generator -60-kva-used/42277, , = More information =, , Type number: 4045TF120 GENERATOR 60 KVA

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Heidenhain LS 623 ML: 220 mm iD nr 228 861 04 + signal decode

sheet width: 3,5 mm cutting width: 3050 mm weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: SIN840D spindle turning speed - stepless: 5 - 10.000 U/min power capacity at 40 % load: 38,00 KW power capacity at 100 % load: 25,00 kW max. torque at 40% / 100% load: 288 / 187 kW spindle diameter in front bearing: mm spindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed capacity X/Y/Z: 12,00 kN B - axis: 180 x 0,001 ° rapid travel B-axis: 10,00 U/min size of pallet: 800 x 630 mm table load: 0,80 t C-axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 800 U/min power capacity - table: 13,85 kW max. torque on the faceplate: 1.550 Nm toolpiece magazine: chain magazine: 60 Stück tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 230 mm tool length - max.: 450 mm weight of tools max.: 30,00 kg total power requirement: 80,00 kW weight of the machine ca.: 18,0 ...

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

Key data: 275 KW, 380 kVA, 400 V

Deutz MWM Gas-CHP TBG 234 V12 Gas Electricity and Heat Generator from 1990, AC Generator from 2019 with unknown operating hours. 252 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2S5 C 6/4, 380 KVA Deutz MWM TBG 234 V12 Manufacturer: Deutz MWM Model: TBG 234 V12 Type: Gas Engine Serial number: 234.12.02457 Power [KW]: 275 Year of Make: 1990 Operating hours: unknown Weight [kg]: 5,000 Dimensions LxWxH [cm]: 3.6 x 1.75 x 2.6 AC Generator Leroy Somer LSA 47.2S5 C 6/4 Manufacturer: Leroy Somer Model: LSA 47.2S5 C 6/4 Type: AC Synchronous Generator Serial Number: 36572000001 Power [KVA]: 380 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 548 Speed [1/min]: 1,500 Year of Make: 2019 Weight [kg]: 1.126

We offer a DERMOPAN 2 radiotherapy device including a 1-year warranty. We also have all spare parts for these devices in stock. If you have any further questions, please contact us. Here we offer a fully functional DERMOPAN 2 device for radiation therapy, including 1 Year warranty. We also have all spare parts for these devices in stock. If you have any questions, we will be happy to send you further information.

Key data: 360 KW, 600 kVA, 400 V

Deutz MWM Gas-CHP TBG 616 V12 Gas electricity and heat generator from 2002 with unknown operating hours, with control. 360 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I 534 E2, 600 KVA Manufacturer: Deutz MWM Model: TBG 616 V12 Type: Gas Engine Serial Number: 2203625 Power [KW]: 360 Year of Make: 2002 Operating hours: unknown Weight [kg]: 5,000 Dimensions LxWxH [m]: 3.5 x 1.25 x 2.2 AC Generator Stamford HC I 534 E2 Manufacturer: Stamford Model: HC I 534 E2 Type: AC Synchronous Generator Serial number: 02324690 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 2002 Weight [kg]: 1.625

Key data: 1100 KW, 983 kVA, 10000 V

Deutz / MWM Landfill Gas CHP Plant TBG 604 CV16 Landfill gas electricity and heat generator from 1998, unknown operating hours, with control, radiator and silencer 983 KWel x 1,500 rpm, 10,000 V/50 Hz. AC Generator: Stamford HVSI814C2, 983 KVA Manufacturer: Deutz / MWM Model / Engine: TBG 604 CV16 Type: Gas Engine (Landfill Gas) Serial number: G 808288 Power [KWel]: 983 Engine power [KW]: 1,100 Year of Make: 1993 Operating hours: unknown Weight gene set [kg]: 12,180 Dimensions LxWxH [m]: 5.1 x 1.7 x 2.1 AC Generator Stamford HVSI814C2 Manufacturer: Stamford Model No.: HVSI814C2 Type: AC Synchronous Generator Serial Number: C850153701 Power [KVA]: 983 Voltage [V]: 10,000 Frequency [Hz]: 50 Current [A]: 56.75 Speed [1/min]: 1,500 Year of Make: 1997 Weight [kg]: 4.600

serial number: 10970000633 control: 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control: 67 10.221.661 x-travel: 600 mm y-travel: 700 mm z-travel: 550 mm spindle: SK40 - neu - 380 Std. : spindle speed:: 12.000 U/min automatic swivel milling head: tool change unit: 30 Plätze : Infrarot-Taster : : : : 600 L : : : : 40 bar : mode of operation: 3 + 4 : : MillPlus IT flushing gun: mit Pumpe : Durchmesser 630 mm T-slots: 9 T-Nuten 14 H7 / 63 mm capacity: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max load capacity 10,000 kg Dimensions LxWxH: 2700 x 2000 x 2300 mm

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: iTNC 530 Heidenhain Main spindle:: power capacity - main spindel: 13 / 9 kW turning speed range - main spindle: 20 - 10.000 min/-1 Torque: 83 / 57 Nm tool taper: SK 40 tension force: 10 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min Feed force: 5 kN input unit: 0,01 mm rapid traverse: 30 m/min total power requirement: 20 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Coolantsystem: high pressur ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 2x16 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 8,0 kg max. tool length: 315 mm feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,6 m Documents: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: Rotary screen: Signal lamp - 4 ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 2x16 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 8,0 kg max. tool length: 315 mm feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,6 m Documents: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: 5 Axis CNC - MachiningCenter Un ...

Key data: 990 mm, 390 mm, 590 mm

For sale is a robust and powerful universal milling machine of the brand DECKEL, type FP33. The machine impresses with its high stability, generous travel distances and SK50 tool holder – ideal for workshops, maintenance or manufacturing companies with high requirements. Technical data: Manufacturer: DECKEL Type: FP33 Tool holder: SK 50 Travels:  • X = 990 mm  • Y = 390 mm  • Z = 590 mm Table size (L x W): 1200 mm x 1000 mm Spindle speed: 31.5 – 1600 rpm Motor power: 5.5 kW Machine weight: approx. 4,500 kg Dimensions (L x W x H): 3300 x 2500 x 2000 mm ⚙️ Condition & Notes: Good general condition (more details on request) Delivery: Loading on truck possible Viewing possible by appointment

Milling machine Manufacturer: Reckermann TYPE: Delta 1300 Year of Make: 1990 Working distances: 1000x400x450 Spindle speed 4500 rpm Feed speed 1000/min. Power 27kW Weight 5,000KG Automation No Accessories Paper Filters Works flawlessly

Cleaning and disinfection station ARJO Tornado 241x60x90 cm Cleaning and sanitizing station for emptying, cleaning and sanitizing bedpans, urine bottles or other containers for human excretions. Sink left with folding grate 48x60x70 cm, sink right 60x45x30 cm, 2 doors right, middle compartment 95 cm wide with intermediate shelf, central washer and disinfector Arjo Tornado, 230 V, plug-in ready, model SP1000 SEV0709031

A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: Siemens ergoline table surface area: 2x 790 x 560 mm number of pallets: 2 rapid traverse: 30 m/min turning speed range: 8000 U/min power capacity - milling spindle: 13 kW no. of tools in the magazine: 30 Stück tool taper: SK 40 | | weight: 5,2 t dimensions: 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible.

Dematic conveyor system Accumulating roller 15000-750-690 RA2458 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 15000 mm Condition: good (used) Roller width (RB): 690 mm Nominal/outer width (NB): 750 mm Accumulation slot size: 750 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.35 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side gui ...

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

Key data: 750 mm, 600 mm, 520 mm

Universal machining center Spindle speed up to 18,000 1/min; Rapid traverse 50 m/min; Tool magazine 32 tool positions HSK 63; Swivel table - table size 700 x 500 mm; Table load 350 kg; CNC control Heidenhain TNC 530; Chip conveyor; Coolant system

PRESS DESIGN   drive system: eccentric / crank   table cushion: yes PRESS FORCES   total force (nominal): 63 to   nominal work capacity: 630 kNm PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   opening in bed (diameter): 250 mm SLIDE   table surface (left-right): 450 mm   table surface (front-back): 310 mm   clamping surface diameter: 50 mm   stroke: 100 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 17.5 mm   stroke max.: 100 mm DIE CUSHION (TABLE CUSHION)   number of cushions: 1 TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 340 mm   distance table - slide max.: 440 mm ELECTRICAL SPECIFICATION ...

Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system

Features Volume 31000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 5 Total height 5200 mm Height 4150 mm Diameter width 3000 mm Surface inside IIID Surface marbled on the outside Agitator Propeller Description Topsoil: Inclined cone base 2 crane eyes Threaded Sockets Tank cylinder: Level indicator with bar and scale Manhole 440x340 mm Sample tap DN 15 Ladder hooks Downward-swept CIP cable DN 50 3 x clear drain: 2x with disc valve DN 50, 1x with angled seat valve DN 50 Rear mixer on the side Underbody: Inclined cone base forward-drawn residual drain pipe with angled seat valve DN 50 5 fixed feet

Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. The machine has no controls anymore. Documentation available. On-site inspection is possible.

x-travel: 1.600 mm y-travel: 1.250 mm z-travel: 1.000 mm size of pallet: 1.000 x 1.250 mm control: SIN840D power capacity at 40 % load: 38,00 KW spindle turning speed - stepless: 20 - 10.000 U/min power capacity at 100 % load: 25,00 kW max. torque at 40% / 100% load: 288 / 187 Nm tool taper: SK50 feed X/Y/Z/-axis: 20 - 15.000 mm/min rapid traverse X/Y/Z: 60,00 m/min B - axis: -150° / +80° x 0,001 ° feed B-axis: 3.600 ° / min C-axis: 360 x 0,001 ° Rapid motion C- axis: 1 - 3.600 U / min. table load: 3.000 Kg tool magacine with: 240 tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 250 mm tool length - max.: 650 mm weight of tools max.: 15,00 kg total power requirement: 75,00 kW weight of the machine ca.: 55,00 t dimensions of the machine ca.: 12,50 x 8,00 x 4,20 m 5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheel operating mode 4 240-p ...

Format 54 x 76 cm – 20 x 20 cm Speed : 35 m/min Paper weight : 150-600 g/m2

A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible.

A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.

Hydraulic Press DEGUMA P12-12 II

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

Key data: 635 mm, 510 mm, 460 mm

Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.

Dematic roller curve left 90°-500-440 IR795 RA2351 Make: Dematic Running direction: 90° left running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and imp ...

Dematic roller curve right 90°-500-440 IR795 RA2462 Make: Dematic Running direction: 90° right running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and i ...

This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information.

This 5-axis TORNOS DELTA 20/4 Swiss Type Turning Machine was manufactured in 2011. It features a 3m ROBOBAR bar feeder, chip conveyor, and FANUC control. Main and counter spindles support a max diameter of 20mm and speeds up to 10000 rpm. Ideal for precision turning, consider the opportunity to buy this TORNOS DELTA 20/4 horizontal turning machine. Contact us for more information about this machine.

This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information.

This TORNOS DECO 2000/13 was manufactured in 1999. It features a bar passage of 16 mm and supports up to 20 fixed and 16 rotating tools. Equipped with an IEMCA loader, CONVEYORS IND. ASS. conveyor, and additional oil filter tank, this machine ensures efficient operation. Consider the opportunity to buy this TORNOS DECO 2000/13 swiss type turning machine. Contact us for more information about this machine.